Pansy Patch, Birthday Card, Stampin' Up!

I had actually put my "Pansy Patch" bundle away (really!!!!) and when I saw this card on Pinterest I got my set out and got to work. You can see the original card here. 

The base of the card is a folded half-sheet of Basic White card stock.  I took some scrap Basic White card stock and die cut the two larger flowers and the bud on top. I lightly sponged them with Daffodil Delight ink.

Then I cut the Highland Heather petals and sponged them using Gorgeous Grape ink.

The solid leaves and bud stem piece were die cut using Soft Succulent card stock and sponged with Evening Evergreen. I die cut the detailed leaves part using Evening Evergreen card stock. 

The dark pieces around the flowers and on the bud are die cut from a scrap piece of Night of Navy.

And the last die cut pieces were the Crushed Curry for the center of the flowers.

I assembled the pieces using glue because I wanted to make sure I had some wiggle room in case the pieces aren't where I want them to be. 

Before affixing my pieces to the front of the card, I took my blending brush and scrubbed on some Gorgeous Grape.  

I set the larger flowers in place to see where the words would go. I stamped the words from the same "Pansy Patch" set using black Memento ink.

I glued the two large flowers in place. Then I added the top leaf and the flower bud at the same time. The other leaves were glued in place and the card was done.

This was a very fun card to make. I think it took longer to die cut all the pieces than it did to sponge and assemble them.  I like the way it turned out and now I want to have pansies in my flower garden this year!

Thank you SO very much for taking your time to stop by and see today's birthday card,
Wanda

Pansy Patch, Celebrating You, Thank You Card, Stampin' Up!

I had read that the "Pansy Patch" set/bundle will be retiring. That made me sad because I have hardly used it.  So when I saw this card on the internet, I thought I'd make one.  You can see the original card here.  

The base of my card is a folded half-sheet of Basic White card stock.  This card opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Balmy Blue card stock for the back layer. And a 3-7/8" x 5-1/8" piece of Basic White card stock was cut and then textured using the "Brick and Mortar" embossing folder. I glued that piece to the Balmy Blue piece and then that was taped to the card base.

I cut a 1" x 5-1/8" strip of Designer Series Paper (DSP) from the Subtles 6" x 6" package.  I glued that to the front of the card about 3/8" from the edge of the textured piece.  

The flowers are from the "Pansy Patch" bundle and were die cut using Basic White card stock. The flower center is from a scrap piece of Basic Black card stock and the leaves/greens are from a scrap piece of Old Olive card stock.  The flower edges were sponged using Balmy Blue and then lightly sponged on the very edge using Night of Navy ink.   The greens were sponged using Old Olive ink. 

I assembled the flowers by looking at the ones on the original card and winged it. Then I glued everything down.

The words are from the "Celebrating You" set and were stamped on a scrap piece of Basic White card stock using black Memento ink.  I die cut them using the smallest die from the "Stitched So Sweetly" die set. I sponged the piece using Balmy Blue ink and then added Night of Navy on the edges like I did with the flowers. I set the word piece in place using Dimensionals. 

This was a fun card to make. It was simple and I do like how it turned out.

Thank you SO very much for taking your time to stop by and see today's Thank You card,
Wanda

Artistically Inked, Thank You Card, One Sheet Wonder Technique, Stampin' Up!

I have not done a "One Sheet Wonder" in a long time. When I've done them I've often just used a half sheet of card stock but here I used a full sheet. It was quick and easy and I got 4 cards out of the deal!  I found this card here. 

The base of the card is a folded half-sheet of Basic White card stock. I cut a 4" x 5-1/4" piece of Fresh Freesia card stock for the layer.  Then I took a half-sheet of Soft Sea Foam and I cut it into 8 strips so I could tape one to each side of the card. I only needed a hair of it showing.  So you can cut your strips as small as 1/2" each. 

To make my "One Sheet Wonder" I took a full sheet of Basic White card stock and stamped all over it. The  "Artistically Inked" stamp set was used here. I used Flirty Flamingo for the larger flowers. Highland Heather was used for the smaller flower and a really small flower was stamped on the inside of the Flirty Flamingo flowers. The leaves were stamped using Soft Sea Foam ink. And the dots were stamped using black Memento ink.

The "thanks" is from the same set and was stamped using black Memento ink. I cut my sheet to 3-3/4" x 5-1/8".  The Soft Sea Foam strips were cut at 5-1/8" long x 1/2".  And the Highland Heather piece was cut at 4" x 5-1/4".

I taped the Soft Sea Foam Strips to the "One Sheet Wonder" piece. Then I tied a ribbon around it. I like to wrap the ribbon around the piece (the ribbon is about 6" long. I use snail tape first and than add scotch tape to make sure it stays in place. Then that piece was taped to the Highland Heather piece and then that was taped to the card base.

A piece of ribbon was slipped under the taped ribbon and a knot was tied.  And the card was done!

Not only is it a "One Sheet Wonder" but a quick one at that too!  Now I have 4 cards that were made in hardly any time at all! And I love the colors. I'm SO ready for spring colors. All of our snow is melted but it's still very brown out there. 

This was a very fun card to make and I really like "One Sheet Wonders"!

Thank you SO much for taking your time to stop by and see today's thank you card and fun technique,
Wanda

To assemble the card, I taped the Soft Sea Foam strips to the 

Pansy Patch, Pansy Petals, Birthday or Friendship Card, Stampin' Up!

I couldn't decide if this is a birthday card or a friendship card. I guess it could be used for either. Ifound this card here.  I liked the look of the card and I liked that it used lots of Designer Series Paper (DSP). I also like the doily paper that was used but found out it was something that was purchased and not die cut. I didn't purchase those doilies but I did buy the "Encircled in Beauty" dies. But found out that they are retiring soon. That made me sad because I've hardly used them. So I plan to dig out a bunch of retired DSP and make a bunch of cards with this layout!  I need to use up my DSP!!!

So to make this card I took a 4" x 5-1/4" piece of Basic White card stock.  I added a 4" x 5-1/4" piece of DSP from the "Pansy Petals" 12" x 12" package. You could also use two pieces of the DSP for the sides instead of a larger piece if you only have strips left. The center panel was cut at 2" x 5-1/4".  I taped the larger piece to the card base and the smaller one on top. 

I die cut the lacy piece using a die from the "Encircled in Beauty" die set using a piece of Basic White card stock. I used a double sided stick sheet so it would be a sticker and easier to place on the front of the card. 

This die actually cut out the circle. I took the circle and stamped the words from the "Pansy Patch" set using black Memento ink. I set the lacy part in place and then added the circle to the middle and the card was done.

This is a super quick and easy card to make. And don't forget pretty too!!!

Thank you SO very much for taking your time to stop by and see today's super easy and quick card,
Wanda

Positive Thoughts, All Squared Away, Birthday Card, Stampin' Up!

Today I thought I'd play with some of the items that are going to be retiring. I found this card on Pinterest and I changed it a little. You can see the original card here. 

The base of my card is a folded half-sheet of Basic White card stock. This card opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Pale Papaya card stock for the layer. 

The Designer Series Paper (DSP) is from the "You're a Peach" 12" x 12" package. I cut it at 3-7/8" x 5-1/8".  I also cut a piece of the dotted DSP from the same package that measured  3-7/8" x 1-1/2".  I taped the dotted DSP to the floral DSP and that was then taped to the Pale Papaya card stock. 

I took 20" of white Baker's Twine and folded it in half. Then I tied it around the card at the top edge of the dotted DSP.  I tied it in a knot first and then the bow. I didn't want it moving on me.  I trimmed the ends and then taped that piece to the card base.

The words are from the "All Squared Away" set and were stamped using black Memento ink. I die cut the words using the scalloped edge rectangle from the "Stitched So Sweetly" die set. 

I stamped a butterfly from the "Positive Thoughts" set using black Memento ink on a scrap piece of Basic White card stock.  Then I colored it in using light Pumpkin Pie and light Cajun Craze Blends pens.  I die cut the butterfly and set it in place on top of the word piece using a Dimensional. 

The word piece was set in place using Dimensionals and the card was done.

This was a very quick and easy card to make. It's also a very versatile card. You can use it for quite a number of occasions.

Thank you SO very much for taking your time to stop by and see today's birthday card,
Wanda

Pansy Patch, Friendship Card, Birthday Card, Stampin' Up!

When I saw this card on Pinterest I thought it would be fun to make. Once I got into it I realized I didn't have some of the products used on the original card so I thought I'd just see what I could do with what I had. I really wanted to play with this set because I found out the other day that this set is retiring. It's sad because it's a pretty set and fun too.  But that must mean something even better is going to replace it, right? You can see the original card here.  With the wording here, I couldn't tell if this is a friendship card or a birthday card.  I'm thinking it could be used for either, making it versatile! I also saw that the "Pansy Petals Suite" is retiring. I'm never clear on how that all works. The whole suite or just the Designer Series Paper (DSP)?  I guess I'll just have to wait till the new catalog comes out to see.

The base of the card is a folded half-sheet of Fresh Freesia card stock. This card opens on the bottom and the fold is on the top. 

I took a piece of Fresh Freesia that measured 2-3/4" x 4" and textured it using the "Ornate Floral" embossing folder. I snipped one end into a ribbon bottom. This piece was done using Fresh Freesia vellum card stock. I didn't have any, that's why I went with regular card stock.

Next I stamped the words from the "Pansy Patch" set using Blackberry Bliss card stock. I did set the ribbon piece on top of the front of the card for placement of the words.  Once the words were stamped I glued the textured piece to the front of the card, making sure the space between the words and piece were about the same as the piece and the left edge of the card. 

Now for the die cutting. I took the matching dies and die cut the flower pieces. I used Fresh Freesia for the upper part of the flower, Basic White for the lower part of the flower and for the edging of the flower I used Blackberry Bliss card stock. I used my Blending Brush and scrubbed on some Fresh Freesia ink over the card stock. Then I glued all of the pieces together and I added a Crushed Curry center. I added Dimensionals to the back and set the piece aside. 

The leaves were die cut using Soft Succulent card stock and I used my Blending Brush and scrubbed on some Soft Succulent ink. The leaves were die cut using Soft Succulent Vellum card stock on the original card. I didn't have any so I just used regular card stock. 

I took 7-1/2" piece of Fresh Freesia ribbon and made a loop at the top and taped the ribbon on the front of the card at about the area where the flower would be covering.  The flower was set on top next but not pressed down. Glue was added to the back of the leaves and they were slid under the flower.  Then the flower was pressed down. 

The ends of the ribbon were trimmed and a 4" x 5-1/4" piece of Basic White card stock was added to the inside and the card was done.

This was a very fun and easy card to make. It was rather quick to make too.  And even without the same supplies, I like how it turned out. I am going to miss this set.

Thank you SO very much for taking your time to stop by and see today's Friendship/Birthday card,
Wanda

Ornate Thanks, Expressions in Ink, Thank You Card, 2021- 2022 Stampin' Up! Catalog

Today I was in need of a thank you card. I saw this on on Pinterest so I thought I'd give it a try. Mine is a little different but it's basically the same. You can see the original card here. 

The base of the card is a folded half-sheet of Basic Black card stock. This card opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Basic White card stock and textured it using the "Ornate Floral" embossing folder. I glued it onto the Basic Black card base.

Next I cut three 1" x 4" strips of Designer Series Paper (DSP) from the "Expressions in Ink" 12" x 12" package.  Then I cut three gold foil card stock pieces at 1-1/8" x 4-1/8". I glued the DSP to the foil pieces and then those were glued to the front of the card.

The words are from the "Ornate Thanks" set and were stamped using Versa Mark and gold embossing powder was heat set on it. This piece measured 4-1/8" x 7/8". The gold foil layer behind it was cut at 4-1/4" x 1". I glued the word piece to the gold foil piece. Dimensionals were added to the back and then set in place on the front of the card about 1-3/4" from the bottom edge of the card.

I had some black dots so I glued them to the front of the card. A 4" x 5-1/4" piece of Basic White card stock was added to the inside and the card was done.

I thought this card would be more difficult than it was considering I didn't have any instructions on how to make it, the link didn't take me to any.  I had to look at the design on the DSP and figure out the size from there. Fortunately I was able to figure it out quickly and the rest is history!   This was a fun and quick card to make.  And it's not ugly!!  LOL

Thank you SO very much for taking your time to stop by and see today's Thank You card,
Wanda

Sailing Home, Senior Years, Masculine Retirement Card, 2022 Stampin' Up! Spring Mini Catalog

After yesterday's "Hot Mess" of a card I decided to go with something a bit more simple (and not ugly!) LOL I found this card while surfing the net. You can see the original card here. This is a fun and easy card to make. 

The base of my card is a folded half-sheet of Basic White card stock. I cut a 4" x 5-1/4" piece of Misty Moonlight card stock and textured it with the "Painted Texture" embossing folder. I glued it to the card base.

The DSP is from the "New Horizons" 6" x 6" stack and was cut at 3" x 4-1/4". I cut a 3-1/8" x 4-3/8" piece of Basic Black card stock for the layer. 

I stamped the words from the "Senior Years" set on the bottom left using black Memento ink. I also used black Memento ink for the birds too. The birds are from the "Sailing Home" set.

I stamped the sail boat from the "Sailing Home" set using black Staz On ink on Vellum card stock. I die cut the boat after I set it dry for a few minutes.  I colored the bottom of the boat using Misty Moonlight ink and my blender pen. It didn't dry.  But it didn't matter. I colored it on the backside of the Vellum. I used my tape runner over the whole boat but it wouldn't stick to the colored part. But it was okay, the tape went on the bottom part of the image where the water is so there was tape all around. I set the boat in place and it was just fine. Even the part that didn't dry!

I took the layered piece and set it in place on the front of the card using Dimensionals and the card was done.

This was a very fun card to make. I enjoyed making it more (so much more) than I did with yesterday's card. And this one is not ugly!!! LOL

I forgot to add: Thank you for the comments yesterday. Gisela will be getting the card. But Mary and Christi, please email me and I will send you each a different card. Look to the right on the side bar where it reads: "Got a Question".  You will find my email there.  Thanks again!

Thank you SO very much for taking your time to stop by and see today's masculine retirement card,
Wanda

Eden's Garden, Friendship Card, 2022 Stampin' Up! Spring Catalog

Hot mess!  That was what came out of my mouth when I finished this card. What could go wrong did!! And as I have always done, I have posted the good, the bad, and the ugly. This one bad and ugly!!! LOL I am not even sure I should post how it was made. I can't imagine anyone wanting to make one!! LOL But I will in the event someone can improve on it. If you can, I would gladly post it on here and give you full credit!  All I wanted to do was play with the tringle dies.

The base of my card was a folded half-sheet of Basic White card stock. This card opens on the right and the fold is on the left. So far so good!!

I die cut the stitched triangle from the "Stitched Triangle" die set. I used the 3-1/2" x 3-1/2" x 4-3/4" die for the outside and the2-1/2" x 2-1/2" x 3-2/3" for the center so it would create just a triangle frame. The solid Basic White piece that came from the middle was set aside for a future card (maybe!).  I had used a double-sided sticky sheet on the card stock to make my piece into a sticker. 

I used the 2-1/2" x 2-1/8" x 3-1/2" die for the Designer Series Paper (DSP) that was from the "Abstract Beauty" 4" x 6" package. 

I took the same die and cut a triangle from the center of a 4-1/4" x 5-1/2" piece of card stock. I had a piece that was ruined so it was nice to be able to use it for something useful. I made a stencil with it. Then I took my blending brush and scrubbed on some Granny Apple Green using that stencil. 

Then I set the Basic White triangle in place but I didn't press it down yet. I slipped the DSP triangle under the Basic White tringle and I did press it down where those points of the DSP went under it. I lifted the DSP triangle and added a bit of glue to hold it in place along the bottom part of the triangle. I needed the top part open for the leaves.

I die cut Balmy Blue and Blushing Bride leaves that came from the "Forever Fern" bundle. I also cut 3 gold foil small leaves. I added a little glue to the stems of all of the pieces and slipped them under the triangles. 

The words are from the "Eden's Garden" set and caused me problems too. I had wiped the word piece off and it wasn't completely dry when I inked it up with black Memento ink. Thus the bleeding of the ink. UGH!  Now I could have made a new one but at this point I figured this card couldn't get any uglier than it was, so I just went with it! I die cut the words with a die from the "Tasteful Labels" set and I set the piece in place using Dimenisonals.  And the card was done. Thank goodness!  The hot mess was over!  Now who is going to get this card?  My email in on the the right sidebar under "Got a Question".  If you'd like it, email me with your snail mail address. The first one to respond will get the card mailed to them in an envelope with the card and envelope so you can pass it along.  Kind of like that fruit cake at Christmas, you keep that thing moving along!  LOL

Thank you for bearing with me here!  I promise tomorrow's card will be better,
Wanda

Celebrating You, Artistically Inked, Mother's Day Card, 2022 Spring Mini Catalog

Quick. Easy. Elegant.  This card is also super simple too!  

The base of my card is a folded half-sheet of Basic White card stock. This card opens on the right and the fold is on the left. 

I cut a 3-1/4" x 4-1/2" piece of Designer Series Paper (DSP) from the "New Horizons" 6" x 6" set. I will be saving the strip for a future card. This paper is SO fun and pairs super well with the "Grassy Grove" bundle. I am hoping to play with that set a bit more.

A 3-3/8" x 4-5/8" piece of Highland Heather was cut for the layer.  I didn't tape the DSP to the layer because I needed to see what I was going to do about the words first.

I die cut the flowers using the die from the "Artistic Dies" set that went with the "Artistically Inked" bundle.  I used gold foil card stock to cut the flowers. I had also used the double-sided sticky sheet so it would become a sticker. I hate gluing tiny areas like that, especially when there are so many.

The words are from the "Celebrating You" set and were stamped using Versa Mark and gold embossing powder. I die cut them using the die from the "Tasteful Labels" die.  Then I die cut two more from the center of the Highland Heather card stock.

I taped the DSP to the Highland Heather layer and then I taped that in place on top of the card base.

The word piece as taped to the Highland Heather pieces, one above and to the left and one below and to the right. Dimensionals were added to the back and the piece was set in place. And the card was done.

Pretty, isn't it?  What mom wouldn't love to get that for Mother's Day?

Thank you SO very much for taking your time to stop by and see today's Mother's Day card,
Wanda

Celebrating You, Mother's Day Card, 2022 Stampin' Up! Spring Mini Catalog

While putting some Designer Series Paper (DSP) away and a piece fell out of the package. I need to start picking up these packages with the opening on the top. LOL

The base of the card is a folded half-sheet of Basic White card stock. This card opens on the bottom and the fold is on the top.

My piece of DSP from the "Expressions in Ink" 12" x 12" package, measures 2" x 4". I cut a 1/2" x 4" strip of the striped DSP from the same package. I taped the DSP pieces together. It now measures 2-1/8" x 4". Then I cut a piece of Magenta Madness card stock at 2-1/4" x 4-1/8". I taped the DSP to the card stock and that was taped to the front of the card. I eyed it so the left and top are pretty equal.

The words are from the "Celebrating You" set and were stamped using Melon Mambo ink because I didn't have any Magenta Madness ink. I die cut it with a die from the "Tasteful Labels" die set. And I die cut a piece of gold foil card stock using another die from the same set. I taped the gold piece down and added Dimensionals to the word piece and set it on top of the gold foil piece. Three gold "Metallic Pearls" to the bottom of the words.  And the card was done!

This is a very quick and easy card to make. I love it that I was able to use a piece of DSP that would have been considered scrap. I like how the card turned out.  I think this card can be used for several other occasions as well.

Thank you SO very much for taking your time to stop by and see today's Mother's Day card,
Wanda

Let's Set Sail, Celebrating You, Father's Day Card, Masculine Card, 2022 Stampin' Up! Spring Mini Catalog

I have been using the "Celebrating You" set an awful lot. It's got a lot of fun wording in it and in different fonts.  I wanted to make a masculine card today and I saw the Father's Day wording so I went with that.  Here's how I made my card. 

The base of the card is a folded half-sheet of Basic White card stock. This card opens at the bottom and the fold is at the top.

I took a  4" x 5-1/4" piece of Balmy Blue card stock and textured it using the "Painted Texture" embossing folder. I glued it to the card base.

Then I die cut the scalloped edge rectangle from the "Colors & Contour" bundle. I stamped the water using Balmy Blue ink that was stamped off once. 

Next I stamped the boat using Early Espresso ink. The sails were stamped using Real Red ink. I punched them out with the matching punch.  I glued the sails to the mast and set it aside. 

I punched a 1" circle and used it as a stencil. I took my blending brush and scrubbed in some Daffodil Delight ink.  

Then I set the boat about where I wanted it to go so I could stamp the shadow. Did you ever get a stamp in your set and you look at it 15 different ways and still can't figure out what it is?  Well, that was this image for me. It wasn't until I saw it on a card someone had made and the lightbulb brightened up the room!!! LOL  Yup, it's a shadow!  I stamped it using Misty Moonlight ink. The birds were stamped using black Memento ink. 

The rectangle was then glued onto the front of the card. The sail boat was set in place using Dimensionals.  

The words are from the "Celebrating You" set and were stamped using black Memento ink. They were die cut using a die from the "Ornate Frames" die set. I took my blending brush and brushed the edges using Balmy Blue ink. I set the word piece in place using Dimensionals and the card was done.

This is a very quick and easy card to make. And I like the set even more now that I know what all the pieces are for! LOL  

Thank you SO very much for taking your time to stop by and see today's Father's Day card,
Wanda

Flowering Fields, Forever Fern, Celebrating You, Mother's Day Card, 2022 Stampin' Up! Spring Mini Catalog

While I was putting my "Flowering Fields" Designer Series Paper (DSP) away, a piece fell out and I took it as an omen and thought I'd make a card with it for today's post.  This is what I came up with and here's how I made it.

The base of the card is a folded half-sheet of Basic White card stock. This card opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Basic White card stock and I textured it using the "Ornate Floral" embossing folder. I glued this to the front of the card.

The piece of DSP from the "Flowering Fields" 12" x 12" package measured 2" x 4-1/4".  I cut a 2-1/8" x 4-3/8" piece of Pool Party card stock for the layer. I taped the DSP to the card stock and then I glued the piece in place on top of the textured card stock.

I die cut the gold foil flower/leaves using the die from the "Forever Fern" bundle. I also cut the smaller leaves from the same die set. I used a scrap piece of Basic White card stock for that.

Then I took some Linen Thread and made three loops. I use glue dots to hold the loops together where the ends of the thread meet.  I used a dot of glue to hold the thread in place.

The words are from the "Celebrating You" and were stamped on a scrap piece of Basic White card stock using black Memento ink. I die cut it using the die from the "Tasteful Labels" die set. I added Dimensionals behind the word piece.   A little bit of glue was added to the stem of the gold leaves piece and they were set in place over the area where the thread was glued down. I added a little bit of glue to the white leaves and then the words were added at the same time as the white leaves. I just slipped them under before I pressed down on the words.

Three "Polished Dots" were added to the front of the card and the card was done.  This was a quick and easy card to make and I used that piece of DSP that just fell out of the package. I like how the card turned out. It's got a bright springy feel to it.  And again, this is a very versatile card and can be used for a variety of occasions.

Thank you SO very much for taking your time to see today's Mother's Day card,
Wanda

Celebrating You, Daffodil Afternoon, Easter Card, 2022 Stampin' Up! Spring Mini Catalog

Today I thought I would try a card using the other tag dies in the set. You can see the corners are rounded and on the white piece you can see how the corner starts to go inward. The ribbon is hiding the rest. 

The base of my card is a folded half-sheet of Basic Black card stock. You can use any color you want that goes with the Designer Series Paper (DSP). This card opens on the right and the fold is on the left.

I cut a 5-1/2" x 4-1/4" piece of DSP from the Sale-a-Bration "Daffodil Afternoon" 12" x 12" package. I forgot this was retired but I'm sure you still have some left in your stash!!! I know I do. You know I do!!! LOL  I taped the DSP to the front of the card.

I cut a 5-1/2" x 2-1/2" piece of the DSP for the center panel. Then I cut a 5-1/2" x 2-3/4" piece of Pear Pizzazz card stock for the layer. I taped the DSP to the card stock and then I taped that to the front of the card.

I took a dotted Pale Papaya piece of DSP and die cut the second smallest tag.  The words are from the "Celebrating You" set. I stamped them on a scrap piece of Basic White card stock using black Memento ink. I die cut it with the smallest tag die. I set the tags on top of each other and positioned them to where I liked the look and I lifted one edge and added a little tape and then lifted the opposite edge and added more tape. I turned them over and added tape to the back and set them in place on the front of the card. 

I tied a white bow and glued it to the area on the tags where the holes are.  

A 4" x 5-1/4" piece of Basic White was added to the inside of the card and the card was done.

This was a very fun and easy card to make. I may have to try this with some current DSP. Look how much was used!!! You can use this card for a number of other occasions, it's very versatile. 

Thank you SO very much for taking your time to stop by and see today's Easter Card,
Wanda