Wildflower Birthday, Simply Said, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a birthday card to share with you using the "Wildflower Birthday" 12" x 12" Designer Series Paper (DSP). I found this card on Pinterest. You can see it here. I only made a few minor changes. There was no link to the instructions so please read on to see how I put the card together.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. The original card used a half-sheet of Pretty in Pink card stock. Since I have so much Basic White and it's (was) a lot cheaper than the colored card stock I tend to make the card bases white and use the colors as a layer. Plus that way I don't have to cut and tape a piece of white to the inside. 

I am on a quest to use up my package of "Wildflower Birthday" DSP. I have SO much of it. I had bought a package and then a couple of months back I went to a Stamp Camp and we used the same DSP and were giving a whole package of it in our kit. SO, I have lots of sheets to use up. This card has a lot of DSP on it so that was a nice start to using it up.

On top of the Pretty in Pink card stock that was cut 4" x 5-1/4" is a piece of the DSP that measures 3-3/4" x 5".  Now if you don't have enough of that color you can cut it in two and put one on the upper part of the Pretty in Pink layer and the other on the bottom. If it's still a bit short you can always make that center part wider. Once that was taped to the front of the card I worked on the center part. 

That center DSP part measures 3-3/4" x 2-3/4" and the Pretty in Pink layer behind it measures 3" x 4".  I taped the DSP center piece to the Pretty in Pink layer I just cut. Then I taped that to the front of the card I added the bouquet. It's from another sheet in the package. This sheet is full of pop/punch out images. There's just a little bit of perforation around the pieces to hold them onto the sheet. I just popped the bouquet out and added Dimensionals to the back. I set the bouquet in place on the front of the card.

The words are from the "Simply Said" set and were stamped using Blueberry Bushel ink on a piece of Basic White card stock. I cut them out using the die in the "Stylish Shapes" set. Dimensionals were added to the back and it was set in place on the front of the card.  I should have moved my bouquet up and over a little bit more to get the words up higher on the card.  It's okay where it is but I like the way it was done on the original card better. I added a bow using some retired ribbon I had and that was it.

This was a fun and quick card to make. SO pretty!

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Wildflower Birthday, With You In Mind, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick and easy birthday card to share with you. I'm still using up my products while I wait for my order to come late next week. It seems like such a long time when you're waiting for stuff!  Plus the things I have that were fun when I got them don't seem like a lot of fun now. Funny how that is. Everything was perfectly fine till the new stuff came out!  LOL Anyway, please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top. I cut a 4" x 5-1/4" piece of Pool Party card stock for the layer. Before taping that layer down I used the second largest die in the "Countryside Corners" set. And I was SO glad to see that these are in the new catalog. I haven't played with it enough. This is what happens when you buy too many fun things. This time I didn't over do it so I would have time to play with everything more than once!  After cutting I taped the Pool Party piece to the card base.

Next I cut a 5" x 3-3/4" piece of Designer Series Paper (DSP) from the "Wildflower Birthday" 12" x 12" package. I taped that to the Pool Party piece.

Using the third largest die in the "Countryside Corners" set I cut a Basic White piece. I stamped the greetings on it using a stamp from the "With You In Mind" set (which is in the new catalog too). I stamped it using Blue Berry Bushel ink. I taped the two die cut pieces together and then taped that to the DSP.

In the package of DSP is a sheet full of pop out pieces. I popped out the cupcake and set it in place on the card using Dimensionals.

I thought the left side needed something so I used a few of the sequins from the "Itty Bitty Bokeh Mix" container. I was surprised to find that this is also in the new catalog. And that was it, the card was done.

This was a fun, quick and easy card to make. 

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Wildflower Birthday, Birthday Celebrations, Birthday Card, Stampin' Up!

Hello and welcome to my blog. I am still playing with the "Wildflower Birthday" 12" x 12" Designer Series Paper (DSP) package. I have lots of sheets left and I'd like to use it up. While looking for a card to make I ran across this one on Pinterest and I just thought it was SO pretty. I had all of the stuff to make it, so why not? You can see the original card here. There was no link to it so I made it as best as I could. Please read on to see how I put it together. It is a little different than the original card but it's still pretty.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. I cut a 4" x 5-1/4" piece of DSP for the layer. I taped it to the card base.

Next I took the pretty piece of DSP and cut it using the third largest die in the "Everyday Arches" die set.

I stamped the words from the "Birthday Celebration" set using Blueberry Bushel ink. 

The Pretty in Pink layer behind it was cut using the second largest die in that set. I taped the two layers together. Dimensionals were added to the back and it was set in place on the front of the card.

One of the sheets in the package has punch outs and the balloon was included in that sheet. Cute, huh? I set it in pace with a couple of Dimensionals on the back.

And for the final touch three gold sequins were added and the card was done. Isn't it pretty? See why I just had to make it?

The beauty of packages of DSP is that there are two sheets of each design in it. So that means I was able to make two of these cards at the same time. And why not? I already had the words set up in the MISTY/Stamparatus and they were all inked up and ready to go. So I got two cards done today!  YAY!

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Wildflower Birthday, Simply Said, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have another birthday card to share with you using the "Wildflower Birthday" 12" x 12" package of Designer Series Paper (DSP). I'm sad that this DSP did not make into the new catalog. It's such a fun pack with beautiful sheets and two sheets of punch out images. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I cut a 4" x 5-1/4" piece of Pretty in Pink card stock for the layer. On top of that is a 3-1/4" x 4-1/2" piece of Blueberry Bushel card stock.

The DSP on top of the Blueberry Bushel piece was cut at 3" x 2-1/2" for the top piece and 3" x 1-5/8" for the bottom piece. I taped those to the the Blueberry Bushel piece. Then that was taped to the Pretty in Pink piece and then that was taped to the front of the card base.

The flower and leaf were punched out. Dimensionals were added to the back of the flower. I set the leaf on one of the Dimensionals and also added tape to the back of the leaf. I set the flower in place.

I stamped the words using the "Simply Said" set. I thought Blueberry Bushel ink would be a better look than black ink. I cut them out using the die from the "Heart Shaped" bundle. I really like that die. Dimensionals were added to the back and it was set in place on the lower part of the card.

This was a fun and quick card to make. I do like how it turned out. I love the colors. This would also make a great thinking of you card, get well card or a thank you card.

Thank you SO much for taking your time to stop in and see today's birthday card,
Wanda

Wildflower Birthday, Simply Said, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Did you ever suddenly realize you needed to quick whip up a birthday card and get it out in the mail before the mail carrier arrives? Well, that happened to me today. I hadn't paid attention to the calendar and took a look today and saw I needed to rush to my workroom and whip out a card in a flash. Please read on to see how I made this card.

I took a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

Next I took the cake image from the "Wildflower Birthday" 12" x 12" package of Designer Series Paper (DSP). There are two sheets full of images just ready to put on a card. This was one of them. It was trimmed a very little bit so it measures 3-1/2" x 5". 

I trimmed a piece of Misty Moonlight card stock to measure 3-3/4" x 5-1/4". I taped the DSP to it and then that was taped to the front of the card base.

The words are from the "Simply Said" set and were stamped using black Memento ink. I cut them out using the die from the "Heart Shaped" bundle.  Dimensionals were added to the back and it was set in place on the front of the card. I decided to set it on the cake at an angle because putting it on straight didn't look so good because there wasn't a lot of room to place it. And that was it, the card was done. I quickly addressed the envelope and wrote a nice little note inside and off it went and just in time too! Phew!

Thank you SO very much for taking your time to stop in and see today's quick birthday card,
Wanda

Darling Dinos, Children's Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a children's birthday card to share with you. Please read on to see how it was made. 

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

The Designer Series Paper I used for this card is from the "Unbounded Beauty" 12" x 12" package. I cut the back layer at 4" x 5-1/4" and I taped it to the card base.

The next layer (the Peach Pie colored one) was cut at 3-1/2" x 4-3/4".  I didn't tape that to the front of the card yet. 

Three strips measuring 1" x 2-1/2" and one piece measuring 2" x 3-1/4" were cut. Those pieces were set in place on top of the peach colored layer. 

Next I stamped the words from the "Darling Dinos" bundle using black Memento ink. I decided to just stamp right on top of the DSP.  I thought about stamping them on Basic White card stock but there wouldn't be much of a border around it showing the green. So stamping directly to the DSP was the better option. Though the hexagon piece could have been moved up to make up for that space.

Now at this point I could wrap some ribbon around the piece and add a bow when I'm done but I opted to not do the ribbon because it wouldn't show due to the hexagon piece. 

The hexagon piece was punched out of Basic White card stock using the "Heartfelt Hexagon" punch. I used Pretty in Pink ink on a Blending Brush and scrubbed on some ink to soften the piece.  The plain white was just too bright. I taped it to the front of the card. I pretty much centered the hexagon over the dividing like between the strips and larger bottom piece of DSP.

Then the cute dino was stamped using black Memento ink on Basic White card stock. I did not buy the in color Blends Pens so I used my Blending Pen and ink pads to color it in. I used Shy Shamrock for the body. Pretty in Pink for the toe nails, dots and crown behind the head. Peach Pie and Pretty in Pink with a little Boho Blue over some of the pink areas to give it a soft purple look.  Dimensionals were added behind the dino and I set it in place on the hexagon.

I tied a bow and glued it to the left side. This hid the space where the gap is between the strips and bottom piece of DSP.

This was a fun and easy card to make. I'm going to miss this set. It is retired but I am still playing with it till the new stuff comes.  And like I did the other day, I made a template using copier paper so I could repeat this layout with ease. I also put the date of my post on it so I can look back to see color placement or any changes I made. 

Thank you SO very much for taking your time to stop in and see today's children's birthday card,
Wanda

Beautiful Butterflies, Simply Said, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a birthday card to share with you that allows you to use up some of those pieces of scrap Designer Series Paper (DSP). Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

My piece of DSP is from the "Bloom Impressions" 12" x 12" package. This was a free Sale-a-Brations item. This piece was sitting on my worktable just waiting to be used. It measured 1-7/8" wide and I trimmed it to 5-1/4" long. Now here's the beauty of this card. You can take your scrap piece and make it work. If your piece is narrower or wider you can make it work. Just cut it to 5-1/4" long. The textured piece will make up the difference.

The textured piece here was made using the embossing folder from the "Beautiful Butterflies" bundle and a piece of Basic White card stock. I cut it 2" wide by 5-1/4" long. I taped the DSP to the left and I glued the textured piece to the right.

I also had this circle on my worktable so I thought I'd try to make it work too. It's from the "Stylish Shapes" set. I had used the second largest die when I had cut it. I stamped the "birthday wishes" from the "Simply Said" set using black Memento ink. I stamped it on the lower part of the circle so I could add a butterfly to the upper part.

The butterflies were cut using the same "Beautiful Butterflies" bundle using Basic White card stock. These little butterflies have a cute little body too. I glued the body on the two butterflies I cut.  Oh and the die set has two butterflies and two little bodies so you only had to run it through the machine once. Dimensionals were added to the back and they were set aside.

I set the circle in place using Dimensionals and then the butterflies were added. Two little pearls were added to the bodies and the card was done.

This was a fun, quick and easy card to make. You can use any DSP you have to create a card like this. So grab your scraps, grab your retired DSP and make some quick cards in no time.

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Delightful Wishes, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick and easy birthday card to share with you. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Basic White card stock and a piece of Daffodil Delight card stock. I also cut a piece of copier paper just a hair smaller than the 4" x 5-1/4".  I like to have something to tape pieces onto. 

Both pieces of card stock were cut on the diagonal. I cut the Basic White piece from top left to bottom right and the Daffodil Delight piece was cut from top left to bottom right. I taped both of them to the piece of copier paper.

Then I cut a strip of Designer Series Paper (DSP) from the "Floral Delight" 12" x 12" package. It measured 1-1/8" x 6-3/4".  I taped it across the center of the card where the two pieces of card stock meet. You don't have to be exactly centered, it's almost better if you're not. Once taped in place I took a scissors and trimmed the corners.

I fussy cut a flower from the same package of DSP. Dimensionals were added to the back and it was set in place on the right side of the card.

The words are from the "Labeled with Love" bundle and were cut using the die in that bundle. I stamped them using Mossy Meadow ink. Dimensionals were added to the back and it was set in place on the lower part of the card.

I opted not to add any embellishments as I didn't want to pay the extra postage to mail it. $.78 per card is bad enough!

This was a fun and quick card to make. I like this layout because you can use strips of DSP and make a ton of cards from one sheet.

Thank you SO very much for taking your time to stop in and see today's birthday card, 
Wanda

Darling Dinos, Children's Birthday Card, Stampin' Up!

Hello and welcome to my blog. This seems to be the longest time of stamping for me. It's the time from when the new catalog hits my worktable until I can order and get the new stuff! So what that means is I now have to play with what I have and with what is going to be retiring, even though I really like the set. The "Darling Dinos" is one of those sets I really like and yes, it's going to be retiring. So I thought I'd make a card with it today and share it with you. Please read on to see how it was made. Plus I have a tip on layouts to share with you.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top.

I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Floral Delight" 12" x 12" package. I taped that to the card base.

Next I cut the strips. The DSP for the strips is from the "Timeless Plaid" 6" x 6" package. I cut three of them at 1/2" x 3-3/4". And the Basic White layer behind them was cut at 2/4" x 4".  I taped the pieces together and then I taped them to the front of the card. The edge of the right strip is about 7/8" from the side of the card. The spaces between the strips is 1/8".  

Then I cut the circle using the 5th smallest die in the "Deckled Circles" set. I cut it from a piece of Basic White. Using my Blending Brush I scrubbed on some Daffodil Delight ink. Dimensionals were added to the back and it was set in place on the front of the card about 1/2" from the right edge.

The dino was next. I stamped him using black Memento ink. I cut him out using the matching die. I colored him with my light Old Olive and light Daffodil Delight Blends pen. Dimensionals were added to the back and it was set in place on the circle. I just placed it where I thought it looked best.

The words are from the same set and were stamped using black Memento ink. I cut the piece to measure 2" x 1". The Daffodil Delight layer was cut at 2-1/4" x 1-1/4".  I taped the layers together. I added Dimensionals to the back and set the piece in place on the front of the card. And the card was done.

I often make a copier paper template/sample of my cards so I can use the layout again at another time. I write down the measurements on the piece and I just recently started writing down the dates I  used the layout so I can go look at it for colors and contrast if needed. I have a stack of these on my worktable. I took my stack out today and I set the dino on top of areas on the samples until I found one that looked like it would best display the image. This one won today! It's fun having these layouts so I can see exactly what I'm getting and the size is exact. It makes it easy to put together a card with lots of layers too.  It's also versatile. The sample is portrait and my card today is landscape. I moved the word piece too.  So I'm not stuck with only one way to play with the layout.

This was a fun children's card to make and I thank you for taking your time to stop in and see it,
Wanda

Playing in the Rain, Shower or Birthday or Congratulations Card, Stampin' Up!

Hello and welcome to my blog. Today I have a card to share with you that could be used for a shower, birthday or congratulations card. Does the image look familiar?  It's from last months calendar page. I thought I would work with it right away instead of letting it sit on my worktable waiting for me to use it or waiting to get ruined by something being set on top of it.  Please read on to see how I made this card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top.

I cut a 4" x 5-1/4" piece of Basic White card stock and textured it using the "Dotted Circles" embossing folder. I glued that to the card base.

Next I took my bunny image and trimmed it to 3-3/8" x 2-1/2". I taped it to a 3-5/8" x 2-3/4" piece of Old Olive card stock. Dimensionals were added to the back and it was set in place on the lower part of the card about 1/2" from the left edge and the bottom edge. 

The words are from the "Playing in the Rain" (retiring) set and was stamped using Old Olive ink. I cut them out using the second smallest die in the "Deckled Circles" set and the Old Olive layer behind it was cut using the 3rd smallest die in that same set. I taped the layers together. Dimensionals were added to the back over the areas that wouldn't be touching the bunny layer. I did add a dot of glue to the upper right corner of the bunny layer and then I set the circle in place. And that was it, the card was done.

That was a very quick and easy card to make, especially when most of it is already done!

Thank you SO very much for taking your time to stop in and see today's shower/birthday/congratulations card,
Wanda

May Calendar Page, Layered Florals, Weekend Project, Stampin' Up!

Hello and welcome to my blog. It's the first of the month so that means it's time for the May calendar page. I got the PDF file for these from Lynette's blog. You can get yours by clicking here. It will take you to her blog and just under the title of her blog is the file. 

I decided to go with a flower since last month was April showers it's only fitting that May would have flowers.

I ran across a partially finished quarter sheet. I think the technique is called "Blackout". What you do is take an embossing folder and run it through your machine with Basic White card stock.  Then you turn it over so you have the texture on the bottom. You are going to color in the images with whatever you like to use. I used Blends pens here. Once done you will take your black ink pad and drag it over the backside and the ink will only go on the flat surface, leaving the colored surface to show through. It's a pretty easy technique and SO pretty.  I forgot to add that the embossing folder is called "Layered Florals".  It's retiring soon.

I trimmed mine so it was just 1/8" shorter than the area it was set on. I used Dimensionals to set mine in place because once the month is over I take that image and make a card with it. So in a couple of days or so I'll be making a card with that bunny I used for my April card.

I look forward to making these every month. But sometimes I struggle with what I'm going to put on the upper part. But I manage to come up with something!

Thank you SO much for taking your time to see this month's calendar page,
Wanda

Darling Dinos, Children's Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I wanted to play with the "Darling Dino" bundle. I found this card on Pinterest that I just had to make. There was no link so I had to guess at the measurements. You can see the original card here. Please read on to see how I put this card together. 

The base of my card is a folded half-sheet of Basic White card stock. On top of that is a 4-1/8" x 5-3/8" piece of Misty Moonlight.

The Pecan Pie piece was cut at 3-5/8" x 4-7/8" and the Basic White piece on top of that was cut at 3-1/2" x 4-3/4".  I taped the white piece to the pecan piece. 

Three strips of Designer Series Paper (DSP) from the 'Timeless Plaid" 6" x 6" stack. Each strip measures 1" x 4-1/2". They were taped to the Basic White piece. 

A piece of linen thread was wrapped around the piece twice and a bow was tied at the left side. It was then taped on top of the Misty Moonlight piece.

Next came the stamping. The dino and flowers from the bundle were stamped using black Memento ink. I cut them out using the matching dies. The dino was colored using both light and dark Pecan Pie Blends pens and light Misty Moonlight. The flowers were colored in using light Misty Moon light, light Daffodil Delight and light Old Olive Blends pens.  

On the original card it looks like they masked the "Happy Birthday" words from the bundle. I don't like to mask so I just printed out the words on my computer. I used the RGB code for Pecan Pie. That code is R=169, G= 116, and B=74. I used Ariel Black font at 14 pt. Once I printed them out I cut them using the 9th die in the "Deckled Circle" set. I set the dino on the card stock so I could see where I needed to tape down the die.

The grassy area on the bottom was made using my light Old Olive Blends pen. I just dotted it on. I didn't do it fast because I didn't want any dashes, just dots. 

I set the dino where it was going to go and then taped the flowers down. I added Dimensionals behind the dino and set it in place on the circle. Dimensionals were added to the back of the circle and it was set in place on top of the card and the card was done.

I LOVE the richness of the colors on this card. My colors are a bit different than on the original card but that's okay, I like them both.

Thank you SO much for taking your time to stop in and see today's children's birthday card,
Wanda

Cake Celebrations, Simply Said, Heart Shaped, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a birthday card to share with you. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Basic White and textured it using the "Distressed Tile" embossing folder. I glued that to the card base.

Next I cut the "Countryside Corners" dies using Basic White and Fresh Freesia card stock. I taped the two layers together.

The cake is from the "Cake Celebrations" bundle. The cake layers are from a piece of Designer Series Paper (DSP) from the "Beautiful Bokeh" 12" x 12" package. There's two dies for the layered cake. The "frosting" in between and on top were die cut using gold foil card stock. And the cake stand is from a scrap piece of Blackberry Bliss card stock. I used the flower dies and a scrap piece from the "Bloom Impressions" 12" x 12" package that was part of the Sale-a-Brations free items.

I taped the cake stand down first and then the "cake" pieces. The frosting pieces were added next and then the flowers. I added a tiny pearl to the center of each flower.

The words are from the "Simply Said" set and were stamped using Blackberry Bliss ink. I cut them out using the "Heart Shaped" bundle from the Sale-a-Brations free items. 

Dimensionals were added to the back of the "Countryside Corners" layers and it was set in place on the front of the card about 3/8" from the top and centered, equal spacing on each side. I just eyed it.

The words were set in place using Dimensionals as well.  And the card was done.

I like the looks of this card but I'm thinking about removing the birthday words and going with wedding words. It looks more like a wedding cake than a birthday cake. It was fun to make. If you have sticky sheets I recommend you use them for the gold pieces, it's a bit messy gluing them and the glue doesn't like to come off the gold.

Thank you SO very much for taking your time to stop in and see today's birthday/wedding card,
Wanda

Unbounded Love, Everyday Arches, Sympathy Card, Stampin' Up!

Hello and welcome to my blog. Today I have a sympathy card to share with you. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Basic White card stock for the top layer. 

The first thing I did with the top layer was to stamp the words. They are from the "Unbounded Love" bundle and were stamped using black Memento ink.

Then I flipped the piece over to add the scored lines. Since I wanted the score lines to be bumpy on the outside of the card I had to flip the piece over. I started the scoring about 1" from the left edge and I scored them at 1/8". I made seven score lines. Now you can do this after you cut the arched opening but I found it easy to get the score lines messed up with an opening in between them. 

Once the score lines were done I took the third smallest die in the "Everyday Arches" die set and cut my opening. It's about 1-1/2" from the bottom edge of the piece and centered on the score lines. After cutting I put the piece back on the score board and went over my lines just to freshen them up. Dimensionals were added to the back and the piece was set aside. 

Next came the framed piece. I used the second and third smallest arched dies on a piece of Basic White card stock. Dimensionals were added to the back and the piece was set aside. 

The scenery image is from the "Thoughtful Journey" 6" x 6" Designer Series Paper (DSP) stack and was cut at about 2-1/4" x 3-1/4".  I hovered over the piece of DSP until I found the image that I liked looking through that opening. I set that image on top of the card base and laid the top layer over it for placement. Once the DSP was where I liked it I held it in place and lightly drew a few small lines around the edge so I knew were to set it down once I taped the back. 

Now that the image was in place I removed the backing from the Dimensionals on the scored piece.

The arched piece was added next and the card was done. 

I thought about adding a brass dove but I liked the clean and simple look so I left it as it was.

This was a very quick and easy card to make, though it did take a lot of Dimensionals around that opening to make sure it didn't sag. But it was SO worth it.

Thank you SO very much for taking your time to stop in and see today's sympathy card,
Wanda