Pin It

Showing posts with label Masculine Birthday Cards. Show all posts
Showing posts with label Masculine Birthday Cards. Show all posts

Sunday, October 25, 2026

Simply Leaves, Birthday Card, Thank You Card, Thinking of You Card, Stampin' Up!

Hello and welcome to my blog. Today I have a fall card to share with you. I have not decided what genre it belongs under. A birthday card? A thinking of you card?  A thank you card? I'm not sure where to go with this card. It's not speaking to me. Maybe you can suggest something. What is it saying to you? I found the card on Pinterest. You can see the original card by clicking here. Please read on to see how it was made.

The base of the card is a folded half-sheet of Cajun Craze card stock. It opens on the right and the fold is on the left. A 4" x 5-1/4" piece of Basic White card stock was cut and taped to the inside.

On the front a 4" x 5-1/4" piece of Early Espresso card stock was cut for the largest layer. 

The beautiful shimmery Designer Series Paper (DSP) piece was cut at 3-7/8" x 5-1/8" from a sheet in the "Glow of Harvest" 12" x 12" package. The sheets in this package are all on a shimmery card stock. There is no design on the back, just the pretty images on the front. I taped this piece on top of the Early Espresso piece. 

On the right I cut a 1" x 5-1/8" piece of Crushed Curry card stock that I textured using the leaves from the "Seasonal Cheer" mini folder. There's three folders in that set, candy canes, bats, and these leaves.  I glued this piece to the right side of the DSP.

The leaves are from the "Simply Leaves" bundle and were stamped using Cajun Craze, Crushed Curry, Basic Beige, and Peaceful Pine ink. Once they were punched out, I taped them together. I added Dimensionals to the back and set them in place on the front of the card. 

A linen bow was tied and glued to the end area of the stems.

I didn't know what I was going to do with the card but I did add a label that will have something on it, or not. It will depend on the words and their size.  

This was a fun card to make and I like how colorful it is for fall.  

Thank you SO much for taking your time to stop in and see today's card,
Wanda

Wednesday, September 16, 2026

Simple Leaves, Seasonal Cheer, Banner Sayings, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a birthday card to share with you that could be used as a masculine or feminine card. Please read on to see how it could be made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I cut a 4" x 5-1/4" piece of Basic White card stock and textured it using the "Textured Tree Ring" embossing folder. I glued it to the card base and then I set it under my stamping mat to dry and lay flat whole I worked on the other pieces.

The center strip is a 1-3/4" x 5" piece of Peaceful Pine card stock. I textured it using the "Seasonal Cheer" mini embossing folder. There's three in that package, the leaves, candy canes and bats. I can't wait to play with them all. I ran my white ink pad over the textured piece so the leaves would stand out more. I set it aside to dry. I cut the Peaceful Pine layer for it, it measures 2" x 5-1/4'. I glued the textured strip to the Basic White strip and then that was glued to the center front of the card. 

The leaves were made next. They are from the "Simple Leaves" bundle. I stamped them using Peaceful Pine, Cajun Craze and Crushed Curry inks on Basic White card stock. I used the dotted leaf vein image on the front of all three leaves. Early Espresso ink was used to stamp them. Then they were punched out using the matching punch. I tied double bows around each stem. Dimensionals were added to the back of each and they were set in place on the front of the card.

The words are from the "Banner Saying" set and were stamped using Basic Black ink. Then they were punched out with the "Three Banner" punch. Dimensionals were added to the back and it was set in place on the lower part of the card. And the card was done.

This was a quick and easy card to make. As I look at it I regret using the Peaceful Pine ink for the top leaf, Blackberry Bliss might have been a better choice.  But it's still okay the way it is.

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Saturday, August 29, 2026

Waterside Retreat, Garden Gathering, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine birthday card to share with you. I found it on Pinterest. You can see the original card by clicking here. I did make a few little changes to it. I wanted to make this card because of the focal layer. I found that sheet difficult to work with. The only thing I had been doing with it was fussy cutting the bobbers.  So when I saw this card I thought it was great that I could use a nice size piece of it to make a card. Please read on to see how it was made.

The base of the card is a folded half-sheet of Gray Granite card stock. a 4' x 5-1/4" piece of Basic White card stock was taped to the inside. 

I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Waterside Retreat" 12" x 12" package and it was taped to the front of the card. 

On the other side of that wood look sheet is the bobbers and lifesavers sheet. I cut that piece at 2-3/4" x 3-3/4".  A 3" x 4" piece of Basic Black card stock was cut for the layer. I taped the two pieces together and then taped that to the front of the card, centering it as much as I can by eyeing it.

Now the fussy cutting starts! I fussy cut the two oars, the lifejacket, the bobber and the fish.  

The word piece was stamped next. The greeting is from the "Garden Gathering" bundle and was stamped using Basic Black ink on Basic White card stock. I cut them out using a die from the "Stylish Shapes" set. Dimensionals were added to the back and it was set in place on the lower left of the card.

Next I taped down the oars. The jacket went on top of the oars. I added the fish to the upper left area and the bobber to the lower left and a bit over the word piece.  And the card was done.

This was a quick and easy card to make, even with the fussy cutting! It's a nice masculine card for the fisherman in your life.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Thursday, August 06, 2026

Waterside Resort, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have one more masculine birthday card to share with you before I move on to something else. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top. 

I cut a 4" x 5-1/4" piece of Crumb Cake card stock for the largest layer. On top of that is a piece of Designer Series Paper (DSP) from the "Waterside Resort" 12" x 12" package. I taped it to the Crumb Cake piece and then that was taped to the front of the card base.

Next I cut the boats image from a sheet full of fun images to play with. It's from the same package of DSP. It was trimmed to measure 3" x 2-1/4". I taped it to a 3-1/4" x 2-1/2" piece of Crumb Cake card stock. Dimensionals were added to the back and it was set aside.

I fussy cut a bobber, a fish and a lifejacket from the same package of DSP.

Three pieces of hemp thread was cut about 7" long each.  I added a little bit of glue to hold them in place just a little to the left of center. Then I set the boats layered piece in place over the hemp strips. It's about 7/16" from the top and left side of the card edges.  The hemp pieces just curled like that on their own. I tried to straighten them and they wouldn't budge so I just went with them the way they were. 

Dimensionals were added to the back of the lifejacket and it was set in place on the upper right of the card.

I taped the bobber in place on the lower left of the card and then the "Happy Birthday" was added. It was printed on my computer and cut using a die from the "Stylish Shapes" set. It was set in place using Dimensionals. 

Dimenisonals were also added to the fish and it was set in place on the lower right.  

I took two pieces of the hem and tied a knot and glued it to the boats image. I just thought it needed a little something.  

I trimmed the ends of the hemp pieces and the card was done.

This was a very quick and easy card to make, even with the fussy cutting.  This fish was one of the not so fun ones to cut out of all of the fish on the sheet but I stuck with it because I thought it was the best choice for this card. It was fun to use that boats image. I thought it might live in the package forever!

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda



Wednesday, August 05, 2026

Waterside Resort, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have another masculine card I found on Pinterest. You can see the original card by clicking here. I did change it a bit. Please read on to see how the card was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Cajun Craze for the largest layer. 

The Designer Series Paper (DSP) is from the "Waterside Resort" 12" x 12" package. I cut a. 3-3/4" x 5" piece and taped it to the front of the card. I could have cut it at 2-1/4" x 5" but I just decided to use the whole piece. 

I cut a 1-5/8" x 5" piece of Basic White card stock and scrubbed on some Pool Party ink on using a blending brush. I taped that piece on top of the DSP. I taped mine on the left side because I wanted the Cajun Craze lifesaver to show instead of covering it.

I took a 1/4" x 5" piece of Pool Party card stock and taped it where the Basic White piece and DSP met.

Three life jackets were fussy cut for the left side. I set them in place using Dimensionals/

The words were done on my computer and I have a bunch of them that I had printed and die cut and set aside (and recently found them!). I took the scrap that came from trimming a quarter sheet of Cajun Craze and taped it to the back of the word piece on the top and bottom and I trimmed the ends to match the angle of the word piece. Dimensionals were added to the back and it was set in place on the front of the card.

I had some colored raindrops/dewdrops and glued them to the left side of the card and the card was done.

This was a fun and very quick card to make. I thought it was such a nice looking card and I just had to make one.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Tuesday, August 04, 2026

Waterside Retreat, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine birthday card to share with you. I found it on Pinterest and just had to make it. I have struggled with the gull background paper and this card answered my call. You can see the original card by clicking here. Please read on to see how the card was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Pool Party card stock for the largest layer.

The gull layer from the "Waterside Resort" 12" x 12" package of Designer Series Paper (DPS) measures 3-3/4" x 5" and it was taped to the top of the Pool Party layer. And then that was taped to the front of the card.

Next I cut the lifesaver and bobber images from another sheet of DSP from the same package. It measures 2-1/4" x 3". I cut a 2-1/2" x 3-1/4" piece of Secret Sea card stock for the layer. I taped the two pieces together and then taped that to the front of the card about 1/2" from the fold and the top edge of the card base. 

I used the fourth largest circle in the "Stylish Shapes" on a piece of Basic White card stock. I had fussy cut a lifejacket and set it in place on top of the circle using Dimensionals. I added tape to the back of the circle and set it in place on the front of the card about 1/4" from the fold and 1" from the top edge of the card base. 

A 2-7/8" x 1/2" strip of DSP was cut for under the word piece. The word piece I used was made on my computer and cut out using a die from the "Stylish Shapes" set.  I had printed a sheet of these words and die cut them all so I could use them to make quick cards. Unfortunately I had put them all in one little baggie and then misplaced the baggie. I found it the other day and now I'm going to use them up so I don't misplace them again. 

This was a fun card to make. I like it SO much better in person than on screen and on screen I thought it was very pretty. I love how all of these colors went together and I'm thrilled that I could use the gulls background piece on a card that was so pleasing to my eyes.  I'd like to make more like this to add to my masculine stash. I know I have lots of the gulls background paper!  I think this was the first time I had used it.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Friday, July 31, 2026

Waterside Resort, Banner Sayings, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. I have one more masculine card using the "Waterside Resort" Designer Series Paper (DSP) before I move onto something else. I found this card on Pinterest. I thought it was a fun masculine card. You can see the original card by clicking here.  Please read on to see how the card was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top.

I cut a 4" x 5-1/4" piece of DSP from the "Waterside Resort" package. I taped it to the front of the card base.

I cut a 1-3/4" x 4-1/4" piece of Mossy Meadow card stock. It's taped to a 2" x 4-1/2" piece of Basic White card stock. Dimensionals were added to the back and it was set in place 1-1/8" from the top edge and 1/2" from both sides.

Next I cut the circle. I used the second largest die in the "Stylish Shapes" set on Very Vanilla card stock.

I fussy cut the oars, life jacket and fish from another sheet of DSP. I taped the oars and life jacket in place. 

The words are from the "Banner Sayings" set using Basic Black ink. I had punched the word piece from a piece of DSP that has the life jackets on the other side. I just lined up the stripes and punched it out using the "Three Banner" punch.  I added Dimensionals to the left side and tape to the right side. I set the words piece in place and then the fish was added using Dimensionals.

I took my Wink of Stella pen and went over the fish to give it a bit of a shimmer.

This was a fun card to make and I had no complaints fussy cutting because it's pretty easy angles on the images.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda


Thursday, July 30, 2026

Waterside Resort, Scalloped Blooms, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine birthday card to share with you. Please read on to see how it was made. 

The base of the card is a folded half-sheet of Basic Gray card stock. It open son the bottom and the fold is on the top. 

I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Waterside Resort" 12" x 12" package. I taped it to the front of the card.

I used the boats image from another sheet of DSP in the same package. It's trimmed to 3" x 2-1/4" and it was taped to a 3-1/4" x 2-1/2" piece of Basic Gray card stock for the layer. Dimensionals were added to the back and it was set in place on the upper left side of the card about 1/2" from the left edge and 1/2" from the top edge. 

A 2-1/4" x 1-3/4" piece of Basic White card stock was cut for the word piece. The words are from the "Scalloped Blooms" bundle and was stamped using Basic Gray ink. I taped it to a 2-1/2" x 2" piece of Basic Gray card stock for the back layer.  I added some tape to the upper left corner and Dimensionals to the rest of it and it was set in place about 1/2" from the bottom edge and 1/2" from the right edge. 

I fussy cut a fish and a bobber from some of the other sheets of DSP in the same package.  Dimensionals were added to the backs of both and they were set in place on the front of the card.

I ran across some really old embellishments that I believe were called "rain drops". I glued them in place on the front of the card and the card was done.

This was a pretty quick card to make. I thought it was a fun card to make and I was happy to have used that little boats image from one of the sheets on DSP.  Fussy cutting the two pieces wasn't tough to do mostly because there wasn't a lot of jagged edges to move around.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda


Wednesday, July 29, 2026

Waterside Resort, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine card to share with you using a simple layout. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. it opens on the bottom and the fold is on the top. 

The Mossy Meadow is the largest layer and was cut at 4" x 5-1/4" and taped to the front of the card.

I cut a piece of Designer Series Paper (DPS) from the "Waterside Resort" 12" x 12" package. It measures 3-7/8" x 5-1/8". I taped this to the front of the card on top of the Mossy Meadow card stock.

The image is from another sheet in the same package of DSP. I used the second largest stitched square in the "Stylish Shapes" die set to cut it out. The layer behind it was cut using the largest square in the same die shape set on a piece of Old Olive card stock.  I taped the two squares together and then taped them to the front of the card. I debated whether or not to add Dimensionals behind it and opted not to. 

The words are from the "Wild Bunch" set and were stamped using Basic Black ink on a scrap piece of Basic White card stock.  I punched it out using the "Three Banner" punch. I also punched out a Mossy Meadow one and I sliced it in half on the long side. I taped each half to the top and bottom of the word piece. Dimensionals were added to the back and it was set in place on the front of the card and the card was done.

This was a very quick and easy card to make. Simple layer cutting and die cutting.  I really like this cabin image. This card could easily be a masculine sympathy card or a masculine get well card.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Thursday, July 23, 2026

Waterside Retreat, Wild Bunch, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today is a very busy day here and I thought I'd see if I could make a quick masculine card. Please read on to see how I made this card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top.

I cut a 2" x 5-1/4" piece of Designer Series Paper (DPS) from the "Waterslide Resort" 12" x 12" package. I taped it to a 2-1/4" x 5-1/2" piece of Old Olive card stock. Then I taped that to the front of the card about 1-5/8" from the bottom edge.

The "happy birthday" was stamped next. It's from the "Wild Bunch" set and was stamped using Old Olive ink. I stamped them just above the layered piece. Anywhere in that area would look good.

The circle was actually in my package of DSP. It had been cut using the largest stitched circle die in the "Stylish Shapes" set. Dimensionals were added to the back and it was set in place on the front of the card about 1/4" from the top and left side.

I fussy cut the oars, vest and bobber. I set the oars and bobber in place using Dimensionals.

For a little bling, I added a few green "Genial Gems" (retired).  I have a few left and that package will be used up! Can't wait for that!  It's not often that I use up my packages of bling but I'm working on it. These seemed to blend in well with the colors on the card and that's why I used them.

This was a fun, quick, and easy card to make. I think the circle could have used a layer but there isn't one in the set, I used the largest.  But it's still nice looking.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Tuesday, July 07, 2026

Waterside Resort, Cutest Crew, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick and easy masculine birthday card to share with you. I found it on Pinterest. You can see the original card by clicking here. I did change the card a little. Please read on to see how I made the card. 

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4-1/8" x 5-3/8" piece of Misty Moonlight card stock for the largest layer. On top of that is a 4' x 5-1/4" piece of Designer Series Paper (DSP) "Waterside Resort" 12" x 12" package. I taped it to the Misty Moonlight piece.

Next I cut a 2" x 3-1/2" piece of DSP from the same package and taped it to a 2-1/4" x 3-3/4" piece of Misty Moonlight card stock.

On the backside of the fish DSP you will find the waves image. I cut that piece at 1" x 2-1/2". I taped it to a 1-1/4" x 2-3/4" piece of Misty Moonlight card stock.

The words are from the "Cutest Crew" stamp set and were stamped using Misty Moonlight ink. I used the middle slot from the 'Three Banner" punch to punch them out. 

I fussy cut a bobber (I think it's called a bobber) and I took a marker and went around the edges to give it a bit of color so it didn't get lost in the wooded piece of DSP. 

I taped the fish layer down first about 1/2" from the fold and about 3/4" from the top and bottom edges. 

Next I taped the waves piece on top of the fish layer. It's about 1" from the right side and 1-3/8" from the top and bottom edges.  

The "happy birthday" is from the "Cutest Crew" stamp set and was set in place on the front of the card using Dimensionals. It's about 2" from the bottom edge and 3/8" from the right side. 

I added a couple small Dimensionals to the back of the bobber piece and set it in place on the front of the card at an angle.  It's about 3/8" from the bottom edge and the top part of the bobber is about 1/2" from the right edge.  And that was it, the card was done.

This was a fun, quick and easy card to make. It's a great masculine card!

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Saturday, July 04, 2026

Ready, Set, Go!, Gears & Texture, Teen/Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a card to share with you that I found on Pinterest. You can see the original card by clicking here. I did change it a little. Please read on to see how I made this card.

The base of the card is a folded half-sheet of Basic White card stock.  It opens on the right and the fold is on the left. 

A 4-1/8" x 5-3/8" piece of Basic Black card stock was cut and taped to the front of the card base.

Using the "Forever Plaid" embossing folder was used on a piece of Smoky Slate card stock. It was trimmed to 3-3/4" x 5". This was glued to the Basic Black layer. I placed it under my stamping mat to lay flat and set up.

Next I cut the banner pieces. I used the 9th and 10th banner die in the "Party Banners" set. I used Real Red on the large one and Basic White card stock on the smaller one.

I stamped the card and the flags from the "Ready, Set, Go!" bundle using Basic Black ink. I cut them out using the matching dies. 

The car was colored in using Blends pens. I used light Real Red, dark Daffodil Delight, light Basic Black and light Smoky Slate. Dimensionals were added to the back and I set it on top of the Basic White banner, I didn't stick it down, I just laid it on there so I could see where the words would go.

The words are from the same "Ready, Set, Go!" bundle and were stamped using Basic Black ink.  

Once the words were stamped I taped the Basic White banner to the Real Red banner. Dimensionals were added to the back and it was set in place on the front of the card. I didn't press down on the bottom part of the banner layers. 

The car was added next and then the flags. 

I die cut a couple of gears from the "Gears & Texture" bundle using Basic Black card stock on the large gear and silver card stock on the smaller one. I added glue to the large one and slipped it under the banner piece. I glued the silver piece to the center of the large gear. 

I didn't have any black dots so I took three of the "Loose Frosted Dots" pieces and I colored them black using the dark Basic Black Blends pen. I glued them in place and the card was done.

This was a fun card to make and I'm thrilled to add another teen card to my very thin stash!

Thank you SO very much for taking your time to stop in and see today's teen birthday card,
Wanda

Monday, June 29, 2026

Gears & Texture, With You In Mind, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a fun card to share with you. It was made using the "One Sheet Wonder" technique.  I found it on Pinterest and you can see the original by clicking here. There is a video you can follow too.  I'm only posting one of the 4 cards I made. Please read on to see how it was made.

I used the "Gears & Texture" bundle to make the card. I've used the bundle before but only the dies so this was a first time I used the stamps. 

The colors of ink pads used here are Old Olive, Crumb Cake, Lost Lagoon, Basic Black, Pecan Pie, and Pretty Peacock.  

The lady in the video had you make a pencil line to mark the for spaces on the full sheet of Basic White card stock. I just put my piece on my paper cutter and scored the lines to get my grid. It's all being cut away so it didn't matter if it was pencil or score marks though the score marks were a lot quick her than measuring and drawing.  

I used the "With You In Mind" set to stamp the birthday greetings. I was looking through my current sets to find some thing that was large but I didn't have anything, so I dug out a recently retired set and used it.  

The die cut gears and pieces were cut using Crumb Cake, Lost Lagoon, Pretty Peacock, Basic Black, and Silver Foil card stock. 

After all of the stamping in the middle area of the full sheet and across the score lines I cut my pieces to measure 3-3/4" x 5".

I used Lost Lagoon for my layer and it measured 4" x 5-1/4".  That was taped to a folded half-sheet of Basic White card stock.

Some of the gears I popped up with Dimensionals and other elements I just glued in place.

This was fun and it was great to get 4 cards done so fast. My masculine stash is not very big so this was nice to be able to add to it.

Thank you SO much for taking your time to stop in and see today's masculine birthday card,
Wanda

Friday, June 19, 2026

Ready, Set, Go!, Wild Bunch, Masculine Chile/Teen Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a child/teen card to share with you. In looking through my stash of cards I realized I have hardly any masculine teen cards.  So I thought the "Ready, Set, Go!" bundle would be perfect for my quest. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4-1/8" x 5-3/8" piece of Smoky Slate card stock for the largest layer. On top of that is a piece of Designer Series Paper (DSP) from the "Love Notes" 6" x 6" stack. I have quite a few pieces of that stack left and I was glad I was able to use this piece. The dots on this piece are actually Soft Sea Foam but it paired well with Smoky Slate. I cut the DSP at 4" x 5-1/4".  

A 2-1/2" x 3-1/2" piece of DSP from the "Paper Medley" 12" x 12" package. I cut two pieces because one of them needs to be turned around so I could get the dots on one side and the denim look for the other side. You can make two cards using this layout. I cut my piece wrong so I will only get one card made out of it. I cut the rectangle from corner to corner. And on the second piece, I flipped it over and cut on the same corners. I cut a piece of copier paper copier paper that was just shy of 2-1/2" x 3-1/2" and I taped the DSP rectangles to it. This was then taped over the flowers that were on the piece of DSP from the "Love Notes" stack. 

The car is from the "Ready, Set, Go!" bundle and was stamped on Basic White card stock using Basic Black hybrid ink. I colored the car using Poppy Parade light and dark Blends. And the tiers were colored in using both light and dark Basic Black Blends. I cut it out using the matching die. Dimensionals were added to the back and it was set in place on the rectangle pieces of DSP.

The words are from the "Wild Bunch" set and were stamped on a piece of Basic White card stock using Basic Black hybrid ink. They were punched out using the "Three Banner" punch and set in place on the front of the card using Dimensionals.

I didn't like how empty the bottom looked so I stamped the flags using Basic Black hybrid ink on Basic White card stock. I cut them out with the matching die. Dimensionals were added to the flags and the piece was set in place on the front of the card.  And that was it, the card is done.

This was a very fun card to make and I am very happy with the way it turned out.

Thank you SO very much for taking your time to stop in and see today's masculine child/teen card,
Wanda

Saturday, June 13, 2026

Waterside Resort, Scalloped Blooms, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. It's been a week of masculine cards and after today's post I'm ready to move on to something else. I have lots of cards I want to make and lots of masculine cards I want to make but I need a break from them! Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Basic White card stock. I cut a 4-1/8" x 5-3/8" piece of Night of Navy card stock. On top of that is the woodgrain looking piece of Designer Series Paper (DSP) from the "Waterside Retreat" 12" x 12" package.  I taped it to the Night of Navy piece and then that as taped to the card base.

I cut the wavy strip from the same package of DSP. It measured 1-1/2" x 4-7/8" and the Night of Navy layer behind it was cut at 1-5/8" x 5". I taped the two pieces together and then taped that to the front of the card about 1/4" from the fold, top and bottom. 

The shell piece, from the same package was cut and sitting in the bottom of the package of DSP so I thought I'd use it on this card and make it work. So far, what was in my head is not working but I still went forward with the card! This piece measured 2" x 3" and I cut the Night of Navy layer at 2-1/8" x 3-1/8".  I taped the two pieces together. Dimensionals were added to the back and it was set in place on the front of the card about 1" from the top edge and 3/8" from the right edge. 

I stamped the words next using the "Scalloped Blooms" bundle. They were stamped on Basic White card stock using Night of Navy ink. I cut them out with a die in that bundle. Then I cut two pieces from that same die using Night of Navy card stock. I layered one piece behind the word piece and I snipped off one of the scallops to tape to the other side. Hindsight here, I should have switched the way the scalloped layer was added because I could have hidden the left bottom edge under the fish tail and it wouldn't be so noticeable that there are tow pieces of card stock there.  Anyway, I taped this piece in place, tucking it under the shell piece just enough to hide the edge.

I had some vests and fish already cut out so I thought I'd add them to the card. The vests were set in place with both tape and Dimensionals and all Dimensionals on the back of the fish.  And that was it, the card was done. Not one of my better pieces of work and nothing like what was in my head!

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Friday, June 12, 2026

Waterside Retreat, Banner Sayings, Masculine Birthday Card, Father's Day Card, Stampin' Up!

Hello and welcome to my blog. I have been spending most of the week posting masculine cards and they have been coming from a video that Terri Gaines created using the full sheet of Designer Series Paper (DSP) from the "Waterside Retreat" 12" x 12" package. This sheet has 12 (maybe 13) images on it. I'm not sure of the exact number because I no longer have full sheet to count them accurately. I could look in the catalog but I don't think I'll be able to see a line defined enough to give an accurate account. But for now I'm going with 12, which is a lot for one sheet!  You can see Terri's video by clicking here. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 1-1/2" x 5-1/2" strip of Mossy Meadow card stock for the strip. And a 1-1/4" x 5-1/2" of the fish DSP was cut to go on top of the Mossy Meadow strip. I taped the two pieces together and then taped that to the front of the card about 1/4" from the fold.

Using the same fish DSP and using the 2nd smallest die in the (retiring) "Branching Out" die set, I cut the a piece out. I also cut the green tag from the sheet of DSP. It was cut allowing the dark boarder to be left around the sides and bottom. The top was torn and then rolled/curled forward.  It was then taped to the fish piece.

Mossy Meadow card stock was used to cut the back layer and the 3rd smallest die from the "Branching Out" set was used. I taped the fish layer to this layer. Dimenisonals were added to the back and it was set in place on the front of the card. It's about7/8" from the top and bottom edge of the card base and 5/8" from the right edge. 

Another piece of DSP was used for the word piece. It's on the backside of the lifejackets sheet. The "Three Banner" punch was used to punch the piece out. Lining up the lines of the DSP in the punch to get that fun border look for the words to fit in between.  I actually punched the piece out first and then stamped the words. Normally I do it the other way. The words are from the "Banner Sayings" set and Basic Black hybrid ink was used to stamp them. Dimensionals were added to the back and it was set in place over the bottom green area of the fish layered piece. 

I love the clean and simple look of this card. It's a perfect masculine card! I think it would be a nice Father's Day card too!

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Thursday, June 11, 2026

Waterside Retreat, Fabulous Sayings, Masculine Birthday Card, Father's Day Card, Stampin' Up!

Hello and welcome to my blog. I am continuing on with the masculine theme and Terri Gaines' fun video of how to use all the images on one of the beautiful sheets of Designer Series Paper (DSP) in the "Waterside Retreat" 12" x 12" package. You can see that video by clicking here. I was thrilled that she made it because I struggled with some of the images on that sheet and now they won't just sit in the bottom of the bag! Terri is a fabulous stamper and demonstrator. She's got a lot of fun ideas and ways to use products that you might not think of. Check out her videos, you won't regret it. So, onto the card I made today from her video.

The base of the card is a folded half-sheet of Early Espresso card stock. It opens on the right and the fold is on the left.  I cut a 4" x 5-1/4" piece of Very Vanilla and taped it to the inside.

On the front a 4" x 5-1/4" piece of Pecan Pie card stock was cut and textured with the "Forever Plaid" embossing folder. I glued that to the front of the card base. I set the card under my stamping mat to keep it flat while the glue set up. I'm not sure if I really need to do that but it's such a habit that I continue to do it. Plus I know where the card is and it's not getting dirty/inky!

Next the layers were cut out using the (retiring) dies from the "Branching Out" set. I used the 3 smallest ones. With the smallest one I cut a piece of Very Vanilla and I also cut the fish image at the top and sides. The other two dies were used to cut the Early Espresso pieces.

I taped the fish image to the cut Very Vanilla image and then stamped the words from the "Fabulous Sayings" set using Early Espresso ink. I wrapped some linen thread around the piece and taped the ends on the backside. Dimensionals were added to the piece and it was set in place on the next larger Early Espresso piece. Then Dimensionals were added to the back of that piece and it was set in place on the largest Early Espresso die cut piece. Glue was added to the back and it was set in place on the front of the card. 

I thought I'd take my blending brush and lightly scrub on some Early Espresso ink over the embossed piece. I went around the die cut pieces. It kind of gives it a lighter glow behind it. Kind of! LOL 

This was a fun card to make and once again I was able to use a piece of the DSP that I really thought would just sit in the bottom of bag of DSP. This was such a quick and easy card to make too! I think it would also make a great Father's Day card.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Wednesday, June 10, 2026

Waterside Retreat, Masculine Birthday Card, Father's Day Card, Stampin' Up!

Hello and welcome to my blog. Today I have another masculine birthday card to share with you. I followed Terri Gaines video to use another piece from the "Waterside Resort" 12" x 12" package of Designer Series Paper (DPS).  You can see her video by clicking here. Please read on to see how I put today's card together.

The base of the card is a folded half-sheet of Basic White card stock, it opens on the right and the fold is on the left. 

I cut a 4" x 5-1/4" piece of Basic White card stock for the large layer. I used my blending brush and lightly scrubbed on some Azure Afternoon ink. I also lightly added some Balmy Blue to that piece too. I mostly tapped my brush on the piece to give it that splotchy look. Then I lightly colored over the whole piece to add some more color and it also removed most of the ink from my blending brush (bonus!).  I taped this piece to the front of the card base.

The edges of the image from the piece of DSP was cut using the 3rd largest die in the "Branching Out" die set. I also cut a piece of the DSP with the waves on it using that same die. And using the 2nd largest die I cut one out of Basic White card stock and lightly colored the edges with Azure Afternoon ink.

I taped the small DSP piece to the center of the wavy piece of DSP. I also cut two 1/8" x 2-3/4" strips and I taped them to where the center piece of DPS meets the waves on the top and bottom. 

The fish were fussy cut and set in place on the piece using Dimensionals. 

The words were done on my computer. I had a few of them sitting around from another project and I thought I should use it since it not only fit on the space but I didn't want it to get ruined sitting on my worktable. I set them in place using Dimensionals.

Dimensionals were added to the back of the large die cut layers and it was set in place on the center of the card. 

I added some Wink of Stella to the fish to give them a bit of a shine and the card was done.

This was a fun card to make and I was SO glad I was able to use that small piece of DSP from the large sheet of fun images.  I am on a mission to make sure I use every one of them on that sheet (thanks to Terri, I'm sure I will!).

This would also make a wonderful Father's Day card too!

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda


Tuesday, June 09, 2026

Waterside Retreat, Masculine Birthday Card, Father's Day Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine birthday card to share with you. I had my "Waterside Retreat" Designer Series Paper (DSP) still sitting out. Shocker, I know! LOL I rarely put anything away right after I'm done with it! I'm thinking about designating this week to "masculine card" week.  We'll see how that goes!  Please read on to see how this card was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top.

I cut a 4" x 5-1/4" piece of Mossy Meadow card stock for the largest layer.  On top of that is a 3-7/8" x 5-1/8" piece of DSP. I thought this print was perfect for my card. The other side of the paper is a lot of gulls flying. I didn't think I'd get as much use out of that side as I would this one.  This one just screams "manly". I taped the two pieces together and it was taped to the card base.

Then I cut the strips. The Mossy Meadow piece was cut at 5-1/4" x 1-1/4" and the Basic White strip was cut at 5-1/8" x 4-1/8".

Before stamping the words on the strip I fussy cut the vest, oar and bobber (I think it's a bobber, I don't fish so I'm guessing here!). Dimensionals were added behind the vest and bobber.

I laid the bobber and vest over the strip to see how much space I had for the words. I stamped the words from the "Fabulous Sayings" set. I'm not big on sets where you have to put the words together but I buy them anyway!  I have enough trouble trying to get one word straight but now there's two!  But I did manage to do it and I think it's pretty straight. I used Mossy Meadow ink to stamp them. Hindsight here, I should have moved the words over to the left a bit more but they are centered to it still looks okay. 

Once the words were stamped I taped the strips together and then taped them to the front of the card. They are about 1-1/4" from the bottom edge of the card base. 

The oar was taped in place and then the vest was added on top of the oar handle and the bobber was set in place on the left side of the strip.

I had a linen bow already made so I thought I'd use it. I was trying to make a sailors knot but it kept looking like a noose so I opted not to add it. The looped linen threads (bow) had to do. I glued it in place. 

I took some glass embellishments I had and glued them in place on the front of the card and the card was done.

I think this could easily be made into a Father's Day card too!

This was actually a fun card to make and it taught me to really look at word placement before stamping! It's fun when you learn lessons to help make your next card better. I have a LOT of learning to do! LOL

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Monday, June 08, 2026

Waterside Retreat, Banner Sayings, Masculine Birthday Card, Father's Day Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine birthday card to share with you. Terri Gaines has a YouTube video that shows all of the fun cards you can make from that one sheet of Designer Series Paper (DSP) from the "Waterside Retreat" 12" x 12" package.  I was SO glad to have run across that video because there were a few images on that sheet that I had no idea what to do with. Terri is SO creative. You can see that video by clicking here. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.  I lightly sponged on some Cajun Craze ink along all four edges.

Next I die cut the pieces using the (retiring) "Branching Out" die set. I used the 2nd and 3rd largest dies on Basic White card stock. On the largest one I scrubbed on some Cajun Craze ink with my blending brush. And on the smaller one I textured it using the "Forever Plaid" embossing folder and then I scrubbed on some Cajun Craze ink all over the whole piece.

The fisherman image is one of those I thought would forever be sitting at the bottom of the bag of DSP but Terri helped me rescue that piece. I set it in the 3rd die and cut the edges. I glued it to the front of the card it's not quite centered, it's about1-1/16" from the top edge of the die cut layer.

Next came some fussy cutting. I cut the oars, floatation device and life jacket. I glued the floatation device in place first. Then I wound some linen thread around my fingers and glued it in place on the left side. The oars were added over the top of it using Dimensionals. Dimensionals were also used to set the life jacket in place.  

The words are from the "Banner Sayings" set. They were stamped on a scrap piece of Basic White card stock using Basic Black hybrid ink and punched out using the "Three Banner" punch. Dimensionals were added to the back of the piece and it was set in place on the front of the card and the card was done.

This was a fun card to make. I love the colors and I'm thrilled I was able to use that image!  It's a great masculine birthday card and would work for Father's Day too!

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda