Charming Day, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick and easy birthday card to share with you. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top. 

I cut a 5-1/2" x 4-1/4' piece of Basic White card stock and textured it using the "Damask Design" embossing folder. I trimmed it to 5-1/4" x 2-1/2" and then glued it to the bottom part of the card.

The flower is from the "Charming Day" bundle and was stamped using black Memento ink on Basic White card stock. I colored it in using both light and dark Poppy Parade and Granny Apple Green Blends pens. Then I cut it out using the matching die in the bundle.

The words are from the same bundle and were stamped using black Memento ink on Basic White card stock. I trimmed the piece to measure 7/8" x 3". 

Dimensionals were added behind the flower and the word piece and they were set in place on the front of the card.

I colored a few rhinestones using my dark Old Olive Blends pen and they were placed on the front of the card and the card was done.

This was such a quick and simple card to make. There's a touch of elegance to it too. I am pleased with the way it turned out.

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Painterly Pears, Label Me Grateful, Thank You Card, Stampin' Up!

Hello and welcome to my blog. Today I have a card to share with you that I found on Pinterest. I was looking for a card using this Designer Series Paper (DSP).  You can see the original card by clicking here. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

The DSP is from the "Painterly Pears" 12" x 12" package. I was looking for a card that used this sheet of DSP. I found it difficult to work with and when I ran across this card I knew I had to make it. Of course there were two full sheets of this in my package. I desperately wanted to use this sheet and today I did!

The words are from the "Label Me Grateful" and were stamped on a piece of Basic White card stock. They were cut out using the 4th smallest die in the "Everyday Arches" set. 

I cut an Old Olive layer using the 5th smallest die in the same set. I taped the layers together and then I taped that to the front of the card centering it as much as I could by eyeing it.

The pears and flowers were fussy cut from another sheet in the same package. 

I glued the large pear down first. I didn't like how the side of the pear was drooping so I took two pieces of scrap card stock and glued them together. Then I cut that into pieces, I added glue to each side and slipped it under the pear so it was level with the left side. Then the stem was glued to the pear. I added a the same glued card stock thickness to under the right leaf.

Next I added the double pears using Dimensionals. The flowers were glued in place behind the double pears and the card was done.

This was a fun card to make and I'm sure it would have been a lot quicker if I had the dies that cut out the pears but I didn't want to invest in them because I bought a lot of other bundles. Fussy cutting here wasn't bad. I'm very happy with the way this card turned out.

Thank you SO very much for taking your time to stop in and see today's thank you card,
Wanda

Painterly Pears, The Right Words, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick birthday card to share with you that I found on Pinterest. You can see the original card by clicking here.

The base of the card is a folded half-sheet of Secret Sea card stock. It opens on the bottom and the fold is on the top.

I cut a 4" x 5-1/4" piece of Basic White card stock for the inside.

The Designer Series Paper (DSP) is from the "Painterly Pears" 12" x 12" package. I cut it to measure 2" x 5-1/4". 

The Granny Apple Green layer behind the DSP was cut at 2-1/4" x 5-1/2". I taped the two pieces together and then taped it to the front of the card about 3/4" from the bottom edge of the card.

The words are from "The Right Words" set and were stamped using black Memento ink. I cut them out using the die from the "Nested Essentials" set. I cut the piece to about 3/4". I added tape to the back and slipped it under the top edge of the Granny Apple Green layer.

I had some retired Old Olive ribbon that I tied into a bow and glued it to the front of the card just under the word piece.

And that was it. It's a super easy, quick and fun card to make. I can imagine myself using up some of my DSP on layouts like this. I have a ton of it I need to use up!

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Extraordinary Flora, The Right Words, Thank You Card, Stampin' Up!

Hello and welcome to my blog. Today I have a thank you card to share with you. I found the floral arrangement part on Pinterest. You can see that by clicking here. From there I went on to make up the rest of the card. 

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Pretty in Pink card stock and textured it using the "Damask Design" embossing folder. I glued it to the front of the card.

Next I took a 2-1/2" x 4" piece of Basic White card stock and textured it using the "Exposed Brick" embossing folder. Then I cut a 2-3/4" x 4-1/4" piece of Strawberry Slush card stock for the layer. I glued the Basic White piece to it.

The flowers are from the "Extraordinary Flora" Washi tape roll. I put the pink flowered section on a piece of Basic White card stock and I cut them out using the matching die. I had to cut two because of the little roses at the top and bottom, there's only one in each section. 

After cutting them all out, I looked at the original card for placement. I ended up just starting with the top and bottom double rose pieces and I glued them in place. I only added glue to the middle of that piece.

Next were the flowers with the two different colored leaves. There's two sizes of them. I added a large and a small on the top area and bottom area. The large flower in the center was added next using two small Dimensionals. Then the two green leaf clusters were added to each side of that flower. 

Dimensionals were added to the back of the Strawberry Slush piece and it was set in place about 1/4" from the fold and the top edge of the card.

The words are from "The Right Words" set and were stamped using black Memento ink. I punched them out using the hexagon punch. I made sure the words were close to the bottom so I could add a flower to the top. I also punched out a Strawberry Slush piece too. I cut it in half and taped each half to the top and bottom of the word piece. 

A couple of small Dimensionals were added to the back of the double floral piece and it was set in place on top of the word piece.

I took two strands of linen thread and tied a bow. I trimmed the ends and glue it in place.

I did like the elements that were added on the original card but I decided to leave my card as it was. I do like how it turned out.

This was a fun card to make. I love that Washi tape and I've made lots of card using it. 

Thank you SO very much for taking your time to stop in and see today's thank you card,
Wanda

The Right Words, Sunflower 3D Embossing, Sympathy Card, Stampin' Up!

Hello and welcome to my blog. Today I have another quick and easy card to share with you. I found it on Pinterest and you can see the original card by clicking here. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4-1/4" x 5-1/2" piece of Basic White card stock and textured it using the "Sunflower" 3D embossing folder. I trimmed the piece to measure 4" x 2-3/4".  Cut the 4" first. Then the remainder is actually cut in half and you are able to make two quick cards with these pieces.

The Basic Black layer measures 4" x 3". I glued the textured sunflower to the Basic Black piece. 

A 4" x 5-1/4" piece of Basic White was cut for the large top layer. I laid the textured layer on top of this piece so I could see where the words would go. The words I used are from "The Right Words" set and were stamped using black Memento ink. 

After stamping the words I taped the sunflower layer to the front of the card about 7/8" from the top edge. Dimensionals were added to the back and the piece was set in place on the front of the card base. And that was it. 

This card was super simple. Super quick. Super easy. And super elegant!

Thank you SO very much for stopping by to see today's sympathy card,
Wanda

Charming Day, Sunflower 3D Embossed Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a super quick and easy card to share with you. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I cut a 5-1/2" x 4-1/4" piece of Secret Sea card stock and textured it using the "Sunflower" 3D embossing folder. After embossing it I cut it to  3-7/8" x 5-1/8". 

Next I took my Basic White ink pad and dragged it over the top of the piece. The ink made contact on the raised areas. I used my heat tool to help the ink dry quicker. It is a slow drying ink. Once dry Dimensionals were added to the back. But did Wanda add Dimensionals? No, she added glue and just as she was going to put it on the front of the card she remembered she was doing to use Dimensionals. So what she ended up doing was cutting a piece of Basic White card stock that measured just shy of the  3-7/8" x 5-1/8". UGH! I think it worked out for the best because texturing the card stock made it feel a bit thinner, now it has a thick sturdy feel to it. Happy accident? 

Before the Dimensionals went on the back I took a 6" piece of 1/4" Basic White (retired) ribbon and taped the ends to the back. Then the Dimensionals were added and the piece was set in place on the front of the card.

The words are from the "Charming Day" bundle and were stamped using black Memento ink. Secret Sea ink would look pretty too but I had the black sitting in front of me and the lazy part of me didn't want to get up and get the Secret Sea ink pad! I had used a scrap piece of Basic White card stock. Once stamped I cut them out using the largest die from the "Stylish Shapes" set. Dimensionals were added to the back and it was set in place across the ribbon. And the card was done.

This was so quick and easy to make. This is such a pretty folder. I can't wait to try some other techniques using it.

Thank you SO much for taking your time to stop in and seeing today's birthday card,
Wanda

Charming Day, Floral Charm, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a birthday card to share with you that I found on Pinterest. You can see the original card here. There was no direct link so I had to work the card myself. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top.

I cut a 4-1/4" x 5-1/2" piece of Basic White card stock and textured it using the "Forever Plaid" embossing folder. Once embossed I trimmed the piece to 4" x 5-1/4".  I glued it to the front of the card.

Next I cut a 1-1/2" x 5-1/4" piece of Designer Series Paper (DPS) from the "Floral Charm" 12" x 12" package. I glued it to the front of the card over the textured piece only. 

Then I cut a 3/8" x 5-1/4" piece of Blackberry Bliss card stock and glued it to on top of the textured piece, making sure it's butted up against the DSP.

The flowers are from the "Charming Day" bundle and was cut using Berry Burst card stock. I glued it to the front of the card.

The words are from the same "Charming Day" bundle and were stamped using black Memento ink on a 7/8" x 2-5/8" piece of Basic White card stock. Dimensionals were added to the back and it was set in place on the upper right side of the card.

I added a few enamel dots (retired) to the card and the card was done.

This was a very quick and easy card to make. I would love to make another one sometime soon.

Thank you SO much for taking your time to stop in and see today's birthday card,
Wanda

Painterly Pears, Choose Happy, Friendship Card, Thinking of You Card, Stampin' Up!

Hello and welcome to my blog. Today I have a card to share with you that I found on Pinterest. I thought it was such a pretty card that I had to make one with what supplies I had. You can see the original card by clicking here. Please read on to see how it was made. 

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4-1/4" x 5-1/2" piece of Basic White card stock and textured it using the "Forever Plaid" embossing folder. I then trimmed it to 4" x 5-1/4". I glued that to the front of the card base.

The Designer Series Paper (DSP) is from the "Painterly Pears" 12" x 12" package. I cut a strip to measure 5-1/4" x 1". I glued that to the left side of the card covering the textured piece.

The pears are from the same package of DSP and were fussy cut. I didn't buy the dies for the paper, I just wanted the paper so I have to fussy cut. But that's okay, it doesn't take that long with these images. I cut the large pear and the stem with leaves, the double pears with leaves and I cut around the pink flower cluster.

The "hello" is from the "Choose Happy" set and was stamped using black Memento ink on a scrap piece of Basic White card stock. I just took my scissors and cut around the word. It ended up measuring 1/2" x 7/8".

To assemble the card I took a piece of black ribbon that I had in my stash and cut to measure 7". I folded it in half to form the loop at the top. Then I stapled it in the center to hold it in place. I trimmed the ends and then added some glue dots to the back. In between the glue does I added some glue to make sure it will stay!

The large pear was added using Dimensionals and the stem was added with Dimensionals on the leaves and a little bit of glue on the bottom of the stem. I set it in place on top of the pear.

The little pink flowers were added next. I Dimensional was added to the lower flower and glue to the right edges of the other two flowers.

Then the pair of pears was added. Again, glue was added where the left pear sits on top of the large pear and a Dimensional on the right pear and small Dimensional between the stems of the pears. It's in the white area of those stems.

The "hello" was added next using 2 small Dimensionals.

I didn't have any Mossy Meadow embellishments so I colored a couple of white Candy Dots (retired) using my dark  Mossy Meadow Blends pen. I set them in place on the front of the card and the card was done.

I do like how this card turned out. I had most of the supplies and what I substituted worked just fine. I could see myself making another one like this sometime in the near future.

Thank you SO very much for taking your time to stop in and see today's friendship, thinking of you card,
Wanda

Charming Day, Floral Charm, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today's card was found on Pinterest. I made a few minor changes. You can see the original card by clicking here. It will open to a new window. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top.

I cut a 5" x 3-3/4" piece of Pretty Peacock card stock for the layer. On top of that is a 4-3/4" x 3-1/2" piece of Designer Series Paper (DSP) from the "Floral Charm" 12" x 12" package. I cut the left side off at 3/4" and I turned it over and taped it to the left side of the Pretty Peacock piece. I taped the remaining piece in place making sure I butted up the DSP edges. I taped the entire piece to the front of the card. I just eyed centering it.

Next I stamped the words from the "Charming Day" bundle using Pretty Peacock ink on a 3/4" x 3" piece of Basic White card stock. I set it in place on the front of the card using Dimensionals. It's about 5/8" from the bottom edge and the right edge of the card base.

The flower was stamped from the same "Charming Day" bundle and was cut out using the coordinating die. I used a blending brush and tapped on Mossy Meadow ink on the leaves. For the flower I tapped on some Peach Pie first and then some Cajun Craze more towards the center. Dimensionals were added to the leaves and I added a Dimensional to the edge of the word piece. I wanted to make sure that I would be able to get the Dimensional under the flower without it getting on the word piece. I just moved the flower around until it hovered over the Dimensional and I pressed the flower in place. 

I had some retired Candy Dots in my stash so I added them to the end of the word piece and the card was done.

This was a fun card to make. It was very quick and easy too.

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Painterly Pears, Simply Said, Friendship Card, Thinking of You Card, Stampin' Up!

Hello and welcome to my blog. Today I have a card to share with you that I found on Pinterest. You can see the original card here. I changed it a bit due to not having all the same products. I did what I could with what I had. Please read on to see how I made today's card. 

The card technique or fun fold here is the "Book Fold". It's super easy to do too. I cut my Basic Black card stock on the 8-1/2" side. Once cut it measured 4-1/4" x 11".  I scored it in the middle at 5-1/2, as usual. Then I score one inch on each side. So the scores are at 6-1/2", 5-1/2" and 4-1/2".  Fold the card in half and burnish the fold line using a bone folder. You want a nice crisp fold. I opened the card and folded the top part back on the 4-1/2" fold, just like you are opening a card. I added glue to the one inch area and closed the card. I set it aside to dry. 

Next I cut the Granny Apple Green card stock. The left strip measures 4-1/8" x 7/8" and the larger piece measures 4-1/8" x 4-3/8". 

The Designer Series Paper (DSP) is from the "Painterly Pears" 12" x 12" package. I used a scrap piece for the strip. It measured 4" x 3/4". I taped it to the Granny Apple Green strip. The larger piece of DSP measures 4" x 3-1/2".  I taped that piece to the larger Granny Apple Green piece. Then I taped the strip to the front of the card.

As for the larger piece, I needed to add the circle before attaching it to the front of the card. I had used the retired "Spotlight on Nature" bundle and cut it using the largest die on Basic White card stock. I taped it to the front of the card about 1" from the top of the DSP and 1" from the side of the DSP. 

The pears were fussy cut because I only bought the DSP and not the stamp set/bundle. The bundle has the matching dies but these images are very easy to fussy cut so I went that route, plus I had bought way too many stamp sets to play with and I didn't dare get another.  Once fussy cut I laid them on the circle and noticed that the circle was too bright. I didn't have the dies to cut the other elements around the pears so I thought I'd just take a toothbrush (the husbands, not mine *winks*) and tapped on some Crushed Curry ink. I think Peach Pie might have been a better choice after I had put the card together. Once the color was added to the circle I set the large pear and stem on the left in place using tape. Then  the second large pear and stem was added with Dimensionals. The small pair of pears was added using Dimensionals on the left side and a bit of tape where it would be touching the large pear.

I had fussy cut some of the flowers from the same sheet the pears were on and I glued them to the front of the card.

The words are from the "Simply Said" set and were stamped using Mossy Meadow ink on Basic White card stock. I used a 1-1/2" circle punch on the word piece. I set it in place using Dimensionals. I also added a couple of flowers to it too.

The flowers were nice but they needed a little something so I added some small pearls to the center of each one and the card was done.

I did have fun making this card. It's something I don't think I would make again but I do like how it turned out.

Thank you SO very much for taking your time to stop in and see today's friendship/thinking of you card,
Wanda

Painterly Pears, Simply Said, Just a Note, Friendship Card, Stampin' Up!

Hello and welcome to my blog. Today I have a super quick and easy note card to share with you. Please read on to see how it was made.

The Designer Series Paper (DSP) used here is from the "Painterly Pears" 12" x 12" package. I had made a card using this paper a few days ago and I cut another piece from that same sheet. 

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Mossy Meadow for the large layer.

The DSP measures 3-3/4" x 5". I stamped the word from the "Simply Said" set using Mossy Meadow ink. Then I taped this piece to the Mossy Meadow piece and that was then taped to the front of the card.

When I had cut the large pair on the card I made the other day and there was a small pear on the piece I had cut off. I didn't want to put it in the scrap bin so I thought I'd just fussy cut it. I didn't buy the dies that go with the DSP, and I don't know if there is a die for the small pear but I do know there's one for the large pear. I added a Dimensional behind the little pear and added it to the front of the card. The image has two pears together and I set it on the one that closely matched the pear I had cut. And that was all I did to make this card.

This was such a quick card to make and even fussy cutting was quick and easy because there wasn't a lot of jagged edges to cut around.

It was fun to just whip up a card in a flash. Sometimes you just need to do that and other times you need to play with lots of layers or pieces! I LOVE layers!

Thank you SO very much for taking your time to stop in and see today's note card,
Wanda

Charming Day, Flora Charm, The Right Words, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today's card comes from Pinterest. I thought it was so pretty that I had to give it a try. You can see the original card by clicking here. It will open to a new window. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Pecan Pie card stock for the largest layer.

The Basic White layer was cut at 3-3/4" x 4-1/2". On this layer the strips were placed. The two Berry Burst ones measure 1-1/4" x 4-1/2" and 3/4" x 4-1/2". The Designer Series Paper (DSP) is from the "Flora Charm" 12" x 12" package and the strip measures 1" x 4-1/2".  I taped the Berry Burst layers first. It's easier to add the end pieces first and the middle one last, this way it makes it easier to keep the center piece looking even on each side. 

Once the strips were taped to the Basic White piece, that was then taped to the Pecan Pie piece.

Next came the flowers and leaves. They are from the "Charming Day" bundle. The flowers were cut from Bubble Bath and Berry Burst card stock. The sets of leaves were cut from Pecan Pie card stock. 

The words are from "The Right Words" set and were stamped on Basic White card stock using Pecan Pie ink. I cut the piece at 1/2". I trimmed the right end close to the "Y".  

The bottom of the word piece is about 1" from the bottom edge of the Pecan Pie layer. I taped the word piece down. I did that so I would know where to add the leaves and flower. 

There's a little trick to the flower pieces. I slipped one petal from the Berry Burst piece into the opening of the Bubble Bath flower. Those petals match, it's just that the Berry Burst one is moved to the right a little.  I added some glue to hold the two pieces together. I didn't need much, I just added some to the Bubble Bath piece and pressed the two pieces together. Dimensionals were added to the back of the flower. I didn't remove the backing yet.

The leaves were set on the front of the card and I laid the flower on top to see how it looked. Once I liked the way the leaves looked I set the flower aside and taped the leaves down. I added tape to the two bottom leaves because I wanted the other leaves to look like they were floating in the air. Once the leaves were stuck I added the flower. I made sure that I could see the wording.

I thought the flower could use something so I added a little Wink of Stella to it.

Using some enamel dots (retired) that I had I set one on the center of the flower and one on each of the Berry Burst panels. And the card was done.

I like how it turned out but if I were to make another one I think I would texture the Pecan Pie layer and the Berry Burst panels. I just feel like they need a little something more. 

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Charming Day, Textured Notes, Wedding Card, Stampin' Up!

Hello and welcome to my blog. Today I have a wedding card to share with you. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I cut a 4-1/4" x 5-1/2" piece of Basic White card stock and textured it using the "Damask Design" embossing folder. I cut it to measure 3-3/4" x 5" and I glued it to the front of the card.

Next I cut the Basic Black layer and Basic White layer using the dies from the "Textured Notes" die set. I used the 3rd and 4th largest dies. I taped the two layers together. 

The rose was cut using a die from the "Charming Day" bundle. I cut it out using Granny Apple Green card stock that had a double sided sticky sheet added to it to make it into a sticker to make it easier to set in place. You can also use glue to put affix the piece. As for me, I'm lazy and take the easy way out when I can (or when I remember). Then I just cut the flower part using Real Red card stock. I had to trim a little off the Real Red piece so it would look like there was the green coming from underneath the flower. When cutting the red card stock the green part was red. If I had taped it like it was it would not have looked very nice. I just simply trimmed around the flower bottom and then taped it on top of the Granny Apple Green piece. I removed the protective sheet from the back of the piece and set it in place on the black and white layered piece. The red piece was taped on top of the green flower. Make sure you get it on there exact or the green will show. 

Dimensionals were added to the back of the black and white layered piece and it was set in place on the front of the card.

The words were printed on my computer. I didn't have any stamps that would work for that space so I printed them. Then I cut them out using the retired die from the "Heart Shaped" bundle. 

I thought the card could use a little something more, but what? Then I thought that some Wink of Stella on the rose would be a nice touch and it turns out that it was! And the card was complete.

This was a very quick, easy and simple card to make. It's a fun layout and I was glad I was able to use that flower die. I didn't think I would because I couldn't envision it in my head. But as it turns out it ended up looking pretty nice and now I need to figure out another way to use it! It's always good to try to use all of the pieces in the stamp bundles, right?

Thank you SO very much for taking your time to stop in and see today's wedding card,
Wanda

Simply Said, Painterly Pears, Note Card, Stampin' Up!

Hello and welcome to my blog. Today I have a super quick and easy card to share with you. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold was on the left.

I cut a 4" x 5-1/4" piece of Mossy Meadow for the large layer.

The Designer Series Paper (DSP) from the "Painterly Pears" 12" x 12" package was cut at 3-3/4" x 5". 

The words are from the "Simply Said" set and were stamped using Mossy Meadow ink. I taped the DSP to the Mossy Meadow piece and then that was taped to the card base.

This set has two sheets full of pears and leaves that can be cut out with coordinating dies. I did not by the dies, just the DSP so I fussy cut the pieces. There is not a lot of jagged edges to cut so it didn't take long to cut the pear and the leaves. Dimensionals were added to the back of both pieces. I set the pear in place first and then I set the leaved on. And that was it. 

This paper is SO pretty and easy to work with. The sheet that the words were stamped on have images all around the edges with the center being white. It makes it great to cut it for a one sheet wonder. I cut the piece at 4". I didn't cut anymore off the sheet because I'm not sure what I'm going to do with them. I was just making what I had in mind and it turned out!  Don't you love it when what you designed in your mind looks like the end piece?  I know I do! 

This was a super quick and easy card to make and since there's another full sheet in the set, I may make another one in the near future.

Thank you SO very much for taking your time to stop in and see today's note card,
Wanda