Pin It

Tuesday, January 31, 2012

Altered Tissue Box Weekend Project

 I was a bit surprised at how easy it was to cover this tissue box.  I know, you're saying, "it's no big deal to wrap some card stock around a tissue box and call it decorated."  Well, that is so true.  But I didn't just "wrap" the card stock around the tissue box.  I actually formed a box bottom and top to it so the original tissue box can be replaced when emptied! 

I did wrap the card stock around the box to see where the score lines needed to be made.  It's best to do it that way because I have noticed that each tissue box is a bit off in measurements from the next.  After I made the scores I did notice that the card stock (an 8-1/2" x 11") didn't go all the way around the box. Well, I wasn't going to waste this card stock so I just added a piece in the back to make it the right length (plus a little for gluing together).  Then I scored the bottom edge.  And before I cut it out I added one square to the bottom. I did this on the square I thought would be the front of my box. And I added a little bit more so I could have something to fold over and glue on the inside to hold the bottom on.  And there you have it.  The bottom of the box.  Before it was all squared up and glued I stamped on it.  Here I used a jumbo wheel image.  You can stamp anything you want on them.  I went with the wheel because I knew it would be quick and cute too.  I wanted the bottom part of my box to be busier than the top part.  I used Pirouette Pink for the bottom color and I used Pretty in Pink ink.  

For the cover I just measured the top square and added 1-1/2" around the whole thing.  I cut out the piece and then scored it at 1-1/2" on all sides.  SO easy.  Then I punched the edges.  I wasn't thinking when I was working the top and I didn't leave anything on the 1-1/2" side to create a tab to glue the sides together.  I ended up taking those pieces I had cut off and made a "V" shape with them and glued them on the inside.  It worked out nicely too.  The top felt a bit loose until I added those pieces in the corner.  Now it's perfect.  

Before you glue those corners together you do need to cut out the oval hole for the tissue to come out.  What I did was I took a piece of really thin scrap paper (cheap copier paper) and I took a pencil and with the copier paper on top of the box I just held the paper firmly in place and went around the area with the pencil and the texture of the perforated oval showed through on the paper.  I cut out that oval.  Then I used that as a template for the oval to be cut out on my lid.  It was a little difficult to get it exact but I got it close enough.  And once the tissue is opened no one will really notice that it is off about 1/8"! 

Now this is ready to go into the basket of Valentine's "stuff" for my friend.  It is getting VERY close to being full.  I have several more things I want to make for it but they may not make it into the basket because of their size!  But I'll see what I can do!!! LOL

My tissue box came from the dollar bins at Michael's.  It's a great way to dress up one of those tissue boxes for any occasion!!

Thank you SO much for visiting today,
Wanda

Monday, January 30, 2012

Super Easy Valentine's Day Card

Talk about a super quick and a super easy Valentine's Day card to make.  I think it took longer to get out all the stuff to create this card than it did to actually sit down and make it!!

One stamp and a few punches and you can just sit down and make this card in about 10 minutes!!

I used a 1" and a 1-1/4" circle punch, the heart punch and the hearts border punch.  

The little red hearts have a tiny pearl on the right side of each one.  It was a nice little touch to the card.

The words came from the "Delightful Dozen" set.  I just stamped them using Real Red ink and that was it!

I am going to see what other little punches I have that are about the same size as the little hearts and make a different card, perhaps a birthday or get well card!!!  This was such an easy card that it makes me want to try to create another one using a different theme!!!  I love quick and easy cards!

Stop back tomorrow, I have another Valentine's Day gift item for you to see!

Thank you SO much for visiting today,
Wanda

Sunday, January 29, 2012

Valentine's Day Lip Balm Holder Weekend Project

 I have not made a Lip Balm holder in a long time.  These are very easy to make and trust me here, they are lots of fun!  I made some one time for stocking stuffers, for gifts and for the DIVA's around Halloween.  I remember taping some tiny square mirror tiles on the insides of those!!!  You can see them here.

The pattern for the holder was from SplitCoastStampers.  Click here for the pattern.

The front of my holder was actually made by me.  I took the conversation hearts candy and put them all face up on a piece of paper and took a picture of them!  Personally I don't like them.  The taste of them not the looks of them.  I think they are cute to look at but gross to eat!!! I printed the photo out onto a piece of label sheet.  I cut it to fit the lip balm and wrapped it around the lip balm.  It really did dress up that little tube!!!  And since I had printed out two of them (I was testing the color on one of them) I thought I would use it on the front of the holder.  It worked too!!! I thought it turned out cute.  I usually have a ribbon going around the holder.  It is added between the front layer and inside layer.  I decided to use a heart shaped brad for my closure.  Most of the time the one who receives the holder takes the lip balm out and tosses the holder.  I know I have done that!! 

On the outside of the holder I stamped the words Happy Valentine's Day from the "Teeny Tiny Wishes" set.  I randomly stamped it all over the front.  It needed a little something but I didn't want to add too much color because I didn't want to take the focal point off from the printed candies.  

Isn't the inside paper cute?  It's from the "Sweet Shop" designer paper package.  

These little holders also sell well at craft fairs for me.  I often get my lip balms from Avon (when they have a great sale on them) and I have gotten them at Aldi, the ones they carry are REALLY nice and I didn't think they were very expensive either.  I try to find good deals on them so I have a better profit margin when I am selling them.

These also make a fun Stamp Camp project, a great Make n Take, customer appreciation gifts, hostess appreciation gifts and as I mentioned above they make great stocking stuffers.  Get busy on making them for your holiday gift giving. When I make a bunch of them I will make myself a template and use it on the inside of each piece so it's quicker to do. I only have to measure the one time.  After that I just trace the lines and use my x-acto knife and I'm done in no time.   I have great plans of making these for the fall craft fair. 

I have a little tip for you on the instructions.  They have you cut the front and inside the same exact sizes.  I cut mine 1/8" smaller on two sides.  Once they were put together you could see the inside.  I didn't like trimming it off and it didn't look very nice on the inside once you do that.  Cutting the piece a bit smaller made a world of difference!  Other than that I just followed the simple instructions. 

Have fun making these and thank you SO much for visiting today,
Wanda

Saturday, January 28, 2012

Caramel Hearts Valentine's Day Gifts Weekend Project

It's always fun to dress up an item for gift giving.  I got these hearts at the grocery store and even though the wrapper was a perfect color for the occasion and the basket, I felt I needed to give it my own personal touch.  A belly band around candies is always nice.  It's easy and it's cute too!

For this belly band I started off with a piece of Real Red card stock and on top of that I added a piece of Pretty in Pink.  I crimped the two pieces and glued them together.  Tape just wouldn't stay with those ridges.  I did cut the Pretty in Pink piece about 1/8" narrower than the red. 

When the glue was set up enough I wrapped it around the candy and glued the back seam together.  I used some clips to hold it in place while I worked on other parts of the band.  I don't like to sit and hold things while they dry.  I have to keep moving!!!  I removed the candy from the band and set it aside to set up and/or dry.

While that was drying I used the heart Sizzlet to make the scalloped heart.  I used Regal Rose for that.  It was nice too that I was able to find some scraps for it. I LOVE it when I can use up those scraps.  

The words were done using the computer and I punched them out with the large heart punch. I sponged the edges and taped it on top of the scalloped heart.  I did glue the layered heart in place on top of the belly band.  Those ridges just wouldn't allow much tape to stick to them and the heart kept coming off.  Once the heart was set in place I added the little heart to it in the corner. And on that little heart I added a tiny pearl.  That just completed the belly band.  I set it all aside to dry completely.  One of them is going in the basket for my friend and the other is going to be for hubby on Valentine's Day.  We don't usually do anything for Valentine's Day.  We don't do gifts (or flowers), we don't do cards (anymore) or even go out to dinner.  I often fix a very nice dinner for us and that is about it.  It doesn't mean that we don't love each other anymore, it's just that we feel we don't need to express it like that on a single particular day when we feel the same for each other ever day of the year!  (well, most days - as long as he doesn't get on my nerves!!! LOL)

I have another project I am working on and I will share it with you when it's done.  I think it's big enough to finally fill that basket!!!  And then I want to make a special card for my friend too and of course I will share that with you as well.

I do need to make a birthday card for my brother-in-law.  It's his birthday tomorrow and of course my card is going to be late.  And here I was doing so well getting the cards out on time and even early for some!  My how quickly things revert back!!!  

Be sure to stop back to see what else I'm up to!

Thank you for stopping by today,
Wanda

Friday, January 27, 2012

Strawberry Milk Anyone? Weekend Project

 I have a bunch of these little cruet jars/containers.  I had gotten them for a project that went by the wayside.  So I am trying to find different ways to use them.  Any suggestions? I'm open for them.  I think I have 4 dozen of these. I need to fill them with something (I was thinking of bath salts) so I can sell them at the fall craft fair and get them out of here!!!

This one contains strawberry powder to be added to milk.  Like the Nestle Quick stuff but it's Strawberry.

This little container held exactly 2 tablespoons full, which is what the directions say to add to your glass of milk. 

I decorated the jar with some fun hearts I cut out using the new Sizzlet die from Stampin' Up!.  What a fun die that is.  I LOVE all the different size and textured hearts.  I picked out a few and used Glue Dots to affix them to the jar and lid. 
The large heart is also done using a Sizzlet.  When I cut out this one I didn't run it all the way through the machine.  I stopped when I saw the words appear on the opposite end.  I wanted the heart to be like a card so I folded it in half before I cut it.  I didn't quite get it right the first time and since the heart was stuck in the die I was able to put it back in and crank the handle a little bit further to get it where I wanted it to be.  And you can see how well it turned out.

The words inside the heart were done on the computer.  And get this, I got them all liked up the first time so I didn't have to play around with it and realign it.  I added a little heart on the inside from the ones I had cut out earlier for the jar.  I punched a hole in it and tied it to the bow with some baker's twine.  

I thought it turned out cute and it is going in the basket of fun Valentine's Day stuff for a very special friend.  The basket is getting pretty full.  I have a couple more things to make and I think the basket will be ready to add the paper crimps to it and seal it up!  I'm getting anxious to show it all finished (but I have to finish it first!!!).

These cute cruets can be found in the bridal section at Michael's.  Joann's would probably have them too but I had gotten mine at Michael's.  Now what do I do with the other TON of them I have left???

Thank you SO much for visiting today,
Wanda

Thursday, January 26, 2012

Milk Carton Gift Basket

Today I wanted to make a little gift basket but really didn't want to cut and score the piece myself.  Then it came to me.  The Milk Carton die was about the size I was thinking about for the basket so I got it out.  I took some fun hearts decorative paper that I had and cut out my milk carton.  I cut the milk carton down to 2-1/2" from the bottom fold. 

I used a decorative edge punch along the whole rim.  Then I added a piece of 1/4" white grosgrain ribbon around the basket. 

Next I cut out a heart I found when I was looking for a piece of Pretty in Pink scrap card stock.  I had stamped the heart a few days back and just stuck the piece in the scrap container.  So I didn't have to stamp the heart for this project!!! Lucky me!!  I did have to cut the heart out by hand (not so lucky) but I was only doing one so it was ok.  The larger heart punch was just too big for this basket.  For this I did tape the heart in place without Dimensionals.  I needed to hide the seam of the ribbon.  

The "with Love" is from the "Field Flowers" set.  It worked perfectly with the "season" and the space I had to work with!  I added a pearl for the "O" in love and it gave it a warmer and sweeter look.

I took a sandwich bag (not the zipper kind) and I poured a few cinnamon jelly beans in it and then set it in the basket and added more jelly beans.  I didn't want to fill the bag and then try to cram it in the basket.  The basket is made of decorative paper, which is not quite as sturdy as card stock.  When it was filled to my satisfaction I tied it shut with a piece of white grosgrain ribbon.  I cut off the remainder of the bag on the top and it fluffed out kind of pretty on it's own.  Now ya gotta LOVE that!!!  And that was all it took to make this cute basket!!  It will go in the larger basket I have for a special friend for Valentine's Day!!  The basket is almost full and I still have things I want to make for it.  I may have to pull out some of the paper crimps in it to make more space!!!

Thank you SO much for visiting today,
Wanda

Wednesday, January 25, 2012

Everybunny Wednesday Sketch Challenge

I decided to take a little break from Valentine's Day cards and play with this fun Easter set I bought back when the catalog first came out.  It came out past Easter so I had to wait to use it.  Well, I suppose I could have played with it sooner but then it wouldn't feel like a new set now would it???

This sketch was very fun.  I don't usually work well with diagonals but this one seemed to be easy enough to play with!

And this adorable bunny in the egg balloon is just too stinkin' cute!!!  There are 6 other images plus one word one in this set. I'm hoping to get a chance to play with them all!!!  I have a few more Valentine's Day things to make and then I'm moving on.  Not just to Easter cards but to some fun birthday cards, masculine cards (of which there just doesn't seem to be enough samples out there of) and of course more gift projects!! 

This sketch was a lot of fun and if you have time I do highly recommend you give it a try!  This one will be going in my album of sketches!  I LOVE that album.  When I find a stamp I want to use I just page through the album until I find a sketch that it will fit in and then I simply put it all together.  For me the layout is the toughest part of making cards!

A bit about the card.  I used the "Sweet Shop" decorative paper for the #3 and #4 panels.  The #4 panel is the backside of the #3 panel paper.  It is textured. The dots are raised.  That was interesting and it gave the card a bit more texture. 

I colored in the image with a blender pen and markers.  I also sponged around the bunny with Bashful Blue to give the look of sky and dimension.

I put the #2 panel in place with Dimensionals.  This card went together rather quickly.  I was surprised because of the pieces, like I said I don't work well with diagonals!!!  I think I would play with this sketch again sometime!

Ok, it's back to work. I have a fun project for you for tomorrow!

Thank you SO much for visiting today,
Wanda

Tuesday, January 24, 2012

Baroque Motif with Four Frames

I have mixed a couple of stamp sets together to get this fun Valentine's Day card.  The swirly "stuff" in the background is from the "Baroque Motifs" set and the "Be my Valentine" is from the Delightful Dozen set.  It was punched out using the label punch.  Also behind that is 2 punched out black labels.  They are taped in place just slightly above and below the white piece to give it a look of shading and dimension.  I punched out a small heart and added a tiny pearl to the one side.

Speaking of dimension, the label piece was set in place using Dimensionals.  I just LOVE those things!!

A piece of 1/4" Real Red ribbon was taped on in back and a piece tied onto the front.  I like tying my ribbon on like that when I can.  It allows me to move that piece I tie on to the exact spot I want it to be.  It saves a little ribbon, not much but if you are making TONS of these cards the couple of inches you save will add up!

The white decorated piece is taped in place on top of a folded half sheet of Real Red card stock.  A very quick and simple card to make.  These would be great for a Make n Take or even a Stamp a Stack.  

Thank you SO much for visiting today,
Wanda

Monday, January 23, 2012

Heart Tins Valentine's Day Gifts Weekend Project

While digging in a cupboard I ran across these heart shaped tins I had bought a while back.  I had gotten them at Oriental Trading and they still carry them. Click here for the link to them. 

I ran some tape along the outside bottom part of the tin and then added the red satin ribbon.  But that wasn't enough dressing up for me.  I took the small flower punch and punched out a bunch of Pretty in Pink flowers and took my stylus on top of a foam mat and rolled it around the center of the flowers until they curled up.  I put a glue dot on the top of the heart lid and stuck three flowers to each one.  Then I took my gel pen and colored in the centers.   I was going to add some green leaves to the flowers but decided to just leave them as they were.  

I will be adding one of these to the basket I'm putting together for a friend.  I think I only need a couple more items and the basket will be full enough!  

Oh, when I added the Red Hots I did put them in a little baggie.  I wasn't sure if the lid to the heart would stay in place and I didn't want the candies spilling out all over the place.  Plus I don't like the idea of just dumping the candies into something like that. I always feel they should be in something a bit more sanitary!  

Anyway, I think they turned out cute and I'm sure they will be a big hit!!  These would make great gifts for teachers, students, friends, coworkers, the mail carrier, etc!!  And they are not very expensive either!  You know you gotta LOVE that!!!   Have fun making them!

Thank you SO much for visiting today,
Wanda

Sunday, January 22, 2012

I Love You Valentine's Day Card

Today I made a very quick and easy Valentine's Day card.  If you need to make a bunch of cards, this is the one to do.  It has several elements and with layers. But the card goes together easily and quickly!  I could see making a bunch of these in an assembly line format.  Oh and sitting in front of the TV at the same time!  Once you have all the pieces cut and embossed and stamped the rest is just punching and taping.   Very easy.

Have fum making these!

Stop back tomorrow for a fun and easy Valentine's Day gift!

Thank you SO much for visiting today,
Wanda

Saturday, January 21, 2012

Valentine's Day Gifts Weekend Project

Now I am working with a minimal amount of Valentine's Day stamps here and I am amazed at how many of them I actually have! And they are current too!  Shocker, I know!

This fun candy and header were very fun, quick and easy to put together.  I used the "It's a Wrap Holidays" set.  It has the fun "LOVE" and hearts image for the candies.  You just stamp them on mailing labels and stick them in place. I like to make a belly band with them because it's easier to get the candies open and you don't have to worry about any product use or abuse with the Hershey company.  And if you do make a belly band type "thing" for around your candies then you really don't need the address labels.  You can save yourself some money there.  I tend to use the 28# or 30# copier paper. It's thicker and easy to work with.  You don't have to give a second thought to the wrapper of the candy showing through either.  You can use card stock but be careful when wrapping it around the candies.  You want to do it slowly so the card stock doesn't get too many crimps or extra folds in it.  The nicer copier paper wraps around the candies quickly, easily and smoothly.  It's just my preference.  

Now onto the header.  I used a scrap piece of Real Red card stock (folded in half)  and stapled to the baggie.  Again when I stapled the header part on I stapled it so the smooth bar of the staple was on the backside and the bumps on the front.  No one gets poked and the prong things don't get hung up on anything.  I set the stamped layer on top of the header with some Dimensionals and you can't even tell the staple bumps are there. 

I will now add this to the Valentine's basket I'm making for a special friend!!!  I will show it to you when I feel I have filled it enough!!! I will be doing a bit of stamping for it before I am done!  I know you're anxious to see it completed.  So am I!!! LOL

Have a great day and thank you SO much for visiting today,
Wanda

Friday, January 20, 2012

Valentine's Day Frog!

Now who doesn't love that "Valentine's Day Splash" card I cased the other day?  Last night at Stamp Till You Cramp, Leah really liked it and was going to make it.  I had the papers all ready in a pile if she wanted to give it a try.  She took out this adorable frog sticker set she had gotten at Michael's or Joann's and said that her son's girlfriend likes frogs.  I suggested she put the frog on the splash image and she thought she'd give it a try!

This is her card (and envelope)!  We learned to ALWAYS stamp on the envelope from our friend and fabulous fellow stamper Ann!  Ann noticed right away that the envelope was stamped!!!  We all loved the card and I'm sure that Leah's son's girlfriend is going to like it too!  

Isn't it amazing how you can incorporate stickers into your cards and they just seem to work so well together.  And talk about making a card in no time!  This card went together quickly!!

Thank you Leah for letting me share you fun card with everyone, you're the best!

And thank you for visiting my blog today,
Wanda

Thursday, January 19, 2012

Easy Events Valentine's Day Candy Header

I think candy headers are one of the most funnest things to make.  I have made lots of them and they make wonderful gifts.  I have also used them in craft fairs as well and they have been successful there too.

This one is for a gift.  It's going in that basket of "stuff" I've already made in the past couple of weeks.  I was trying to make a card one day and a gift item the next but the Wednesday Sketch Challenge messed that up!! LOL  But I'm back on track and today is the gift item!

These are very easy to make.  You just measure the bag you are using and add 1/4" to it.  Then you need to figure out what you are doing for the image part and then you can figure out the size of the length of the header.  Remember that the front of the header is the part people see but you need to double that measurement because it folds over onto the back.

A little trick I ALWAYS do when I staple the header to the bag.  I staple it on backwards.  I like to have the smooth bar of the staple in the back side.  That way no prongs stick out to poke fingers or get caught on stuff.  I used Dimensionals on the image piece so the bumps from the staple won't effect it. You can just tape it too but use some really strong tape like Stick Strip or Red Line (it's the same thing). The bumps will show a little but if you are trying to cut corners and save some money in making these then that is what you will need to do!

These would also make great gifts for co-workers, make and takes, customer appreciation gifts, hostess gifts, gifts for the kids and even teacher gifts.  Have fun making them.

Thank you SO much for visiting today,
Wanda

Wednesday, January 18, 2012

Happy Valentine's Day Wednesday Sketch Challenge

 Wow, can you believe it? I actually stuck with the sketch layout.  I didn't flip it this week!!!  Shocker, I know!!! LOL

This was a very fun sketch to play with.  The Teeny Tiny Wishes set came in handy for the "Happy Valentine's Day" wording.  I wasn't sure if I was going to use that one or if I was going to pick another theme for my card.  But I decided to go with the Valentine's Day one since it is approaching quickly!

The "Be Mine" was done on my computer and punched out.  Then I used the Sizzlet to make the Rose Red heart behind that one.  

My decorative paper is from the new Martha Stewart pack.  I had a coupon!  You know how that goes.  You can use your favorite decorative papers instead.  I didn't have many Valentine's day sheets of decorative paper so it was a "needed" item.  I also got a gift card to Archiver's for my birthday so I will be heading back there to see what other trouble I can get into!!  LOL

This was an easy enough sketch to do so if you have time, I highly recommend you give it a try.  

Thank you SO much for visiting today,
Wanda