Pin It

Showing posts sorted by date for query one sheet wonder. Sort by relevance Show all posts
Showing posts sorted by date for query one sheet wonder. Sort by relevance Show all posts

Thursday, October 08, 2026

Radiant Sunflower, Scalloped Blooms, Sunflower Field, Thinking of You Card, Stampin' Up!

Hello and welcome to my blog. Today I have a thinking of you card to share with you.  I found a fun one sheet wonder post with several layouts on the internet. You can see the original card by clicking here. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Crushed Curry. It opens on the right and the fold is on the left. I cut a 4" x 5-1/4" piece of Basic White card stock and taped it to the inside.

Next I cut my Designer Series Paper (DSP) from the "Sunflower Field" 12" x 12" package.  The two pieces of DSP were cut at 4" x 4". They were cut along the diagonal at 1" from the opposite sides. When I cut the second piece I cut the diagonal in the opposite direction.  To clarify, I marked the right side down 1" from the top and on the opposite side, the left side, I marked it 1" from the bottom. And for the other sheet I marked the upper left and bottom right. Once cut at the 1" mark, I taped the top piece to a 4" x 5-1/4" piece of Basic White card stock. Then I stamped the flower from the "Radiant Sunflowers" bundle using Crushed Curry ink.

The words were stamped next. They are from the "Scalloped Blooms" and were stamped using Early Espresso ink. I didn't have the same wording as on the original card. That one was done using hot foiling. I don't have that machine (it's on my Christmas wish list. With my fingers crossed. And maybe birthday too! For the rest of my life! LOL).  I just made do with whaat I have. 

Once the words were stamped I taped the bottom piece of DSP in place.

The flowers are from the "Radiant Sunflowers" bundle and were cut using Cajun Craze for the carnation looking flower. On the sunflower shaped one I used Crushed Curry and Early Espresso for the center. The fun thing about the die for the sunflower is that you get to cut two at a time. So I cut two centers at the same time too and I have an extra flower for later.  The leaf in the bundle was stamped using Mossy Meadow ink on Mossy Meadow card stock. It was cut out using the matching die. When cutting the leaf out I also cut some leaves on stems because I needed a couple of tiny leaves and my scrap piece of card stock had room to add them, so why not? 

The carnation looking piece was set in place using a dimensional. The sunflower was added with another dimensional. I added glue to the leaves and tucked them under the sunflower.

I didn't have the green gingham ribbon but I did have a brown in my stash, so I used that and I thought it worked out well.

I had some little glass raindrops that I colored using a Blends pen. I don't like coloring them with my blends pen because I find it ruins the tips. I did save my Blends pens with the ruined tips for two reasons. One is so I could color things such as this and the other is that if it's replacement dries out I might be able to switch the barrels inside and have a working pen. I haven't had to do that yet but I do have a number of ruined pens on hand. It seems that it's the brush side of the pen that gets ruined and the other writing end is still good. So that's another reason not to toss them.

Anyway, this was a fun, quick and easy card to make. I love this layout. Next time I do it, I'm just going to use 4" x 4" pieces of DSP. I tend to cut my sheets at 4" x 12" when I need a piece for the front of a card, so I'm 1/3rd the way there. No need to cut the 6" x 6" piece for me! I'm sure I will be making cards with the other parts of the One Sheet Wonder.  

I have some Christmas sets and pieces stamped that I want to work on but I need to play with Halloween and fall a bit more before I move on to Christmas. My plan is to use up as much of the DSP as I can so I don't have it sitting around here. I have SO much in my stash. I'd love to say that I will be using it up soon but we all know that's not going to happen. LOL

Thank you SO very much for taking your time to stop in and see today's thinking of you card,
Wanda


Monday, June 29, 2026

Gears & Texture, With You In Mind, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a fun card to share with you. It was made using the "One Sheet Wonder" technique.  I found it on Pinterest and you can see the original by clicking here. There is a video you can follow too.  I'm only posting one of the 4 cards I made. Please read on to see how it was made.

I used the "Gears & Texture" bundle to make the card. I've used the bundle before but only the dies so this was a first time I used the stamps. 

The colors of ink pads used here are Old Olive, Crumb Cake, Lost Lagoon, Basic Black, Pecan Pie, and Pretty Peacock.  

The lady in the video had you make a pencil line to mark the for spaces on the full sheet of Basic White card stock. I just put my piece on my paper cutter and scored the lines to get my grid. It's all being cut away so it didn't matter if it was pencil or score marks though the score marks were a lot quick her than measuring and drawing.  

I used the "With You In Mind" set to stamp the birthday greetings. I was looking through my current sets to find some thing that was large but I didn't have anything, so I dug out a recently retired set and used it.  

The die cut gears and pieces were cut using Crumb Cake, Lost Lagoon, Pretty Peacock, Basic Black, and Silver Foil card stock. 

After all of the stamping in the middle area of the full sheet and across the score lines I cut my pieces to measure 3-3/4" x 5".

I used Lost Lagoon for my layer and it measured 4" x 5-1/4".  That was taped to a folded half-sheet of Basic White card stock.

Some of the gears I popped up with Dimensionals and other elements I just glued in place.

This was fun and it was great to get 4 cards done so fast. My masculine stash is not very big so this was nice to be able to add to it.

Thank you SO much for taking your time to stop in and see today's masculine birthday card,
Wanda

Friday, August 01, 2025

Simply Said, Painterly Pears, Note Card, Stampin' Up!

Hello and welcome to my blog. Today I have a super quick and easy card to share with you. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold was on the left.

I cut a 4" x 5-1/4" piece of Mossy Meadow for the large layer.

The Designer Series Paper (DSP) from the "Painterly Pears" 12" x 12" package was cut at 3-3/4" x 5". 

The words are from the "Simply Said" set and were stamped using Mossy Meadow ink. I taped the DSP to the Mossy Meadow piece and then that was taped to the card base.

This set has two sheets full of pears and leaves that can be cut out with coordinating dies. I did not by the dies, just the DSP so I fussy cut the pieces. There is not a lot of jagged edges to cut so it didn't take long to cut the pear and the leaves. Dimensionals were added to the back of both pieces. I set the pear in place first and then I set the leaved on. And that was it. 

This paper is SO pretty and easy to work with. The sheet that the words were stamped on have images all around the edges with the center being white. It makes it great to cut it for a one sheet wonder. I cut the piece at 4". I didn't cut anymore off the sheet because I'm not sure what I'm going to do with them. I was just making what I had in mind and it turned out!  Don't you love it when what you designed in your mind looks like the end piece?  I know I do! 

This was a super quick and easy card to make and since there's another full sheet in the set, I may make another one in the near future.

Thank you SO very much for taking your time to stop in and see today's note card,
Wanda

Thursday, December 26, 2024

Take to the Sky, Adventurous Sky, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I made a birthday card for hubby. Yup, his birthday is the day after Christmas and I celebrate it as a separate day, not combining Christmas and birthday gifts. Though I do put the birthday gift under the tree, he can hold it and shake it but he's not allowed to open it till his birthday. Anyway, this is the card I came up with, it's short and sweet and to the point. I'm exhausted from all of the holiday stuff and here I am making his card because I didn't remember to do it ahead of time. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Take to the Sky" 12" x 12" package. Before taping it to the card base I cut a circle using the die from the "Everyday Details" set.

I stamped the clouds, plane and words from the "Adventurous Sky" bundle. I cut them out with the matching dies.  I took my light Blends Balmy Blue pen and drew along the cloud lines.

Using the light and dark Smoky Slate Blends pens I colored in the airplane. My light pen is almost dried up. How does that happen.  I often wonder if I could just add some rubbing alcohol and bring it back to life. I guess I could give it a try, I don't have anything to lose, I need to order a new one so if it doesn't work it gets tossed out and if it does work I will hold off on ordering a new one. Anyway, Dimensionals were added to all of the pieces and they were set in place on the front of the card and the card was done.

This was such a quick card to make and I'm sure hubby will like it.

Thank you SO much for taking your time to stop in and see today's birthday card,
Wanda

Tuesday, December 10, 2024

Encircled in Nature, Snowflake Sky, Christmas Labels, Christmas Card, Stampin' Up!

Hello and welcome to my blog. Today I have another Christmas card to share with you. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4-1/4" x 5-1/2" piece of Basic White card stock and textured it using the "Snowflake Sky" embossing folder. I trimmed it to 5-1/4" x 4". I glued it to the front of the card. 

The trees were cut using the die in the "Encircled in Nature" bundle and were cut from Basic White card stock. I cut two sets of these trees. I set them aside.

Next I cut the ring of berries. It's from the "Encircled in Nature" bundle. I cut it from Basic White card stock and colored it in. First I colored the stem part. I wanted to use Blends Pens but there's no Garden Green one. I wonder why? I used a marker to do that. Then I took my dark Real Red Blends Pen and colored each berry. Using the dark Cherry Cobbler Blends Pen I colored the tips of each berry. I also added a little bit of light Cherry Cobbler to one side of the berries. A chalk pen was used to add the white highlighting dots on each berry. After I finished that I thought I shouldn't have colored every berry. Skipping a few would have been a better choice. 

I set the circle on the front of the card for placement. I placed one set of trees in the circle, I removed the circle and glued the trees in place.  Then I added a dot of glue to each berry and set the piece in place on top of the embossed piece.

The second set of three were trimmed up a bit on the bottom and small pieces of Dimensionals were added to the back and it was set in place over the ones that were glued down.

The words are from the "Christmas Labels" bundle and were stamped using Garden Green ink on a scrap piece of Basic White card stock. I fussy cut around them. Dimensionals were added to the back and they were set in place on the front of the card.

I added a pearl to the sky to look like a moon and the card was done.

It's not exactly what I had in my head when I started it but it's okay.

Thank you SO very much for taking your time to stop in and see today's Christmas card,
Wanda

Tuesday, December 03, 2024

Snowy Wonder, Snowy Scenes, Christmas Labels, Christmas Card, Stampin' Up!

Hello and welcome to my blog. Today I have a wintry Christmas card to share with you. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock.

I cut a 4" x 1-3/8" piece of Basic White and I tore the top part to make a layer of snow. I taped that to the bottom of the card, leaving 1/4" on the bottom and two sides. Don't press hard on the part where the snowman will go, you are going to need some space to slip him in.

I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Snowy Scenes" 12" x 12" package. I used the die from the "Around the Bend" bundle to cut the curve. I thought this die looked like it had small snowballs on it so I ran with it. I lined up the die about 1/2" from the bottom of the DSP and 1-1/4" down from the upper right side. It doesn't have to be exact. It will depend on what image you use in the open area. I used tape on the solid part and a line of glue along the lower edge. I set it in place on the front of the card.

The snowman was next. He's from the "Snowy Scenes" package of DSP. I used the matching die in the "Snowy Wonder" bundle to cut him out. Though he is easy enough to fussy cut out.  I added tape to the back and slipped him under the torn layer.

The words are from the "Christmas Labels" bundle and were stamped using Pool Party ink. I cut them using the matching die. Dimensionals were added to the back and it was set in place on the front of the card.

Here's something fun to share with you. I took some of the "White Loose Snowflakes" and colored them using my light Pool Party Blends Pen. I added some white ones to the upper part of the card and the colored ones to the lower part. I used glue to set them in place. Above the snowman I stacked a small one on top of the larger one for a different look. And that was it, the card was done. 

This was a fun card to make and I like how it creates a feeling of calm. 

Thank you SO much for taking your time to stop in and see today's Christmas card,
Wanda

Friday, November 29, 2024

Snowy Wonder, Take a Bow, Sophisticated Sled, Snowy Scenes, Christmas Card, Stampin' Up!

 
Hello and welcome to my blog. Today I have a fun Christmas card to share with you. I had found the layout on Pinterest and wanted to give it a try. You can see that card here. I went to the website and tried to find any measurements but I had no luck. Please read on to see how I made the card.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the bottom and the fold is on the top. I cut a 4-1/4" x 5-1/2" piece of Basic White and I textured it using the "Snowflake Sky" embossing folder. Then I cut it to 4" x 5-1/4". I glued it to the front of the card.

The strips were done next. I used the Designer Series Paper (DSP) "Take a Bow" 6"stack and cut them at 4-3/4" x 1" and 4-1/4" x 1/2".  I glued them in place on the front of the card. The larger one is about 3/8" from the left edge and the green one is about 1" from the left edge.  

Next I cut the circles using the 9th and 10th die from the "Deckled Circles" set. The large one is of Real Red card stock and the smaller one is from the "Take a Bow" stack. I also cut one using the smaller die on a piece of Basic White card stock. I taped the DSP circle to the Real Red circle. I tore the Basic White circle and taped one piece on top of the other circles and on the other side of that Basic White circle I tore a smaller piece and taped that on top of the other piece of Basic White torn piece.

The snowman is from the "Snowy Scenes" DSP 12" x 12" package. I used the matching die from the "Snowy Wonder" bundle. I fussy cut two trees from that same package of DSP. I added tape and slipped the bottoms under the torn Basic White piece. Tape was added to the snowman and it was slipped under the top torn Basic White piece. I added Dimensionals to the back of the circles and set it in place on the front of the card about 1" up from the bottom edge.

The words are from the "Sophisticated Sled" bundle and were stamped using Garden Green ink. I cut them out using the die from the "Greetings of the Season" bundle. The dies in that set are tags. I add a Dimensional to the left side and tape to the right. I set the piece in place on top of the circle at angle. A double bow of red and white Baker's Twine was tied and glued in place.

For a final touch I added some of the cute Peppermint Candies embellishments.  I'm SO glad I got mine when I did, they are still sold out (again). We all need to contact Stampin' Up! and beg them to bring them back next year.  Anyway, the card is done and I think it's got a very festive look to it.  I could have made the background behind the snowman a bit more wintery but I do like how festive the stripes make it.

Thank you SO very much for taking your time to stop in and see today's Christmas card,
Wanda

Sunday, November 03, 2024

Sentimental Christmas, Take a Bow, Snowy Wonder, One of a Kind, Christmas Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick and easy Christmas card to share with you.  Please read on to see how it was made.

Materials used here:

1/2 sheet of Basic White card stock
DSP from the Sentimental Christmas package
DSP from the Take a Bow stack
DSP from the Snowy Wonder package
One of a Kind stamp set (for the words)
Real Red ink
Dimensionals
Rhinestones to embellish the card
Double-sided tape

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.
I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Sentimental Christmas" 12" x 12" package. I taped it to the front of the card.

Next  cut a 1-1/2" x 5-1/4" piece of DSP from the "Take a Bow" 6" x 6" stack and I taped it to the left side of the card. I lined it up so the DSP behind it isn't showing.

The snowman is from the "Snowy Scenes" 12" x 12" package and was fussy cut. There is a die in the "Snowy Wonder" bundle that could be used to cut the pieces out. I fussy cut because I forgot I bought the bundle. But upon looking at the dies, the one for the upper part of the globe would have made the globe a bit smaller and the base would have been the same size. It didn't take that long to fussy cut it and it was easy because there wasn't a lot of nooks and crannies to deal with. I added Dimensionals to the back and I set the piece on the front of the card.

The words came next. They are from the "One of a Kind" bundle and were stamped using Real Red ink. They were then cut using the second largest die in the "Deckled Circles" set. I like using those dies for winter words because I think it's got the look of a rough snowball. I used Dimensionals and tape to set the piece in place on the front of the card.

For the final touch I added some crystal rhinestones to the front and the card was done.

Thank you SO very much for taking your time to stop in and see today's Christmas card,
Wanda

Friday, October 25, 2024

Sentimental Christmas, Snowy Wonder, Christmas Labels, Snowy Scenes, Christmas Card, Stampin' Up!

Hello and welcome to my blog. Today I have a snowman Christmas card to share with you. Please read on to see how it was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Basic White card stock and textured it using the "Snowflake Sky" embossing folder. I glued it to the front of the card.

Next I cut my layers. The larger uses Designer Series Paper (DSP) from the "Sentimental Christmas" 12" x 12" package. It measures 2" x 3-1/2" and the Shaded Spruce layer behind it measures 2-1/4" x 3-3/4". I taped the two layers together and then glued them to the front of the card about 3/8" from the top edge and 3/8" from the fold. 

Then I cut the next layers. I used Basic White for the top layer, it measures 2" x 2-1/2".  I used my Blending Brush and I scrubbed on some Pool Party ink. My ink pad was a bit dry so I had to press harder on the pad with the brush. I didn't brush off on scrap paper first, I went directly to the card stock and I had to press down harder to get any color on the card stock. I would swirl clockwise and then when I changed to counter clockwise more ink came off the brush so I got some fun and interesting patches on the piece. I like what I saw so I kept it. Now if I were to try to recreate that, it may not turn out. I'm hoping I can because it's a fun look. The Shaded Spruce layer behind it measures 2-1/4" x 2-3/4".  I taped the two layers together. Then I glued the layer to the front of the card. There's about 3/8" of the DSP showing on the three edges. 

The snowman is from the "Snowy Scenes" 12" x 12" package. I have the "Snowy Wonder" bundle and there's a die in there that will cut a lot of the snowmen that are printed on one of the sheets of DSP.  How fun is that?  I love it when I can play with layers and texture and use printed images to save a little time. The trees are also from that same sheet the snowman came from.  And there's dies for those too! There was a snowman on the sheet that was missing the upper part of the ear muffs and there was one at the bottom of the sheet that was missing most of it's body so I used the die and cut out both. I cut the head off at the scarf of the bottom one and taped it to the top one and now I have another full snowman. I may add a little snowflake embellishment or even some twine over the area where the scarf line is so it won't look like it was pieces together. But that's for another day. I was just adding that so you don't cut through your half snowmen, there's a way to save them! Anyway, Dimensionals were added to the back of the snowman and it was set in place on the front of the card. Tape was added to the trees and they were added as well.

The words are from the "Snowy Wonder" bundle and were stamped using Pool Party ink on a scrap piece of Basic White card stock. I cut them out using the dies from the "Christmas Labels" bundle. I also cut a Shaded Spruce one too. I cut the words out by snipping the piece at the tips. Then I taped that to the Shaded Spruce piece. Dimensionals were added and the piece was set in place on the front of the card.

When I was cutting the other pieces I was cutting out snowflakes at the same time. It saves time plus I can get a bunch of them cut and save some for later. I used three of them on my card. I added a pearl to the center of each one and that was it, the card was done.

This was a fun card to make. I love snowmen and I'm hoping to go out this winter and make one. It's been quite a few year but now that I have a new hip I can resume playing in the snow! I hope to never outgrow that! LOL

Thank you SO very much for taking your time to stop in and see today's Christmas card,
Wanda

Thursday, October 24, 2024

Snowy Wonder, Snowy Scenes, Christmas Card, Stampin' Up!

Hello and welcome to my blog. Today I have a Christmas card to share with you. Please read on to see how it was made.

The base of my card is a folded half-sheet of Basic White card stock. I chose Basic White because it's less expensive than colored card stock. You can use a half-sheet of Pool Party card stock and add Basic White to the inside if you wish. 

I took a 4" x 5-1/4" piece of Basic White card stock and textured it using the "Snowflake Sky" embossing folder. I glued it to the Pool Party piece.

Next I took a piece of Designer Series Paper (DSP) from the "Snowy Scenes" 12" x 12" package. I chose the houses because I thought it was one that would be the most difficult in the package to deal with. I needed to challenge myself to use it. I decided to do double corner fold on the DSP. To do this you will need to mark the piece 2-1/2" up from the bottom (on the right edge) to find center.  From there you will need to mark 1-3/4" to the inside of the piece. Now just snip from the edge to the 1-3/4" mark. I like to score my corner pieces before I fold them because I have had trouble getting them straight and even. Scoring them helps to prevent that.  Once the corners were folded back I glued them in place. You can tape them too but I preferred to use glue so I would know they would stay down. Then I glued the piece of DSP to the Basic White textured piece.

The house in the globe is from the same package of DSP. I fussy cut it. The words are from the "Snowy Wonder" bundle and were stamped using Early Espresso ink. I had set mine up in the Stamparatus (retired) and I stamped it twice because the orange on the image didn't like to accept the ink as well as I had hoped it would. Dimensionals were added to the back and the piece was set in place on the front of the card. I centered it as much as I could by eyeing it.

This was a very fun, quick and easy card to make. I like how it turned out and I was SO glad I could turn my least favorite DSP in the package into a nice looking card. Now I want to use that same DSP to make more of these. Though there's only 6 full house globes in the package.

Thank you SO very much for taking your time to pop in and see today's Christmas card,
Wanda

Saturday, September 14, 2024

Snowman Hugs, Greetings of the Season, Snowy Wonder, Christmas Card, Stampin' Up!

Hello and welcome to my blog.  Today I have a fun snowman card to share with you. I debated on buying this set because I didn't care much for the other snowman that is more of a southern one. I live in the cold north so a snowman is made of snow and not sand. But my love of snowmen won and I bought the set. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Basic White card stock. I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Iconic Celebrations" 6" x 6" stack. I taped it to the front of the card base.

Next I stamped the snowman from the "Snowman Hugs" set. I colored him using using my Blends pens. I used Real Red, Pumpkin Pie, Pecan Pie, Granny Apple Green and Basic Black. Then I fussy cut him out.

Using a scrap piece of Basic White I cut the background shape from the "Greetings of the Season" bundle. Then I textured it using the "Falling Snow" embossing folder. Using Dimensionals I set the snowman in place on top of it.

The words are from the "Sophisticated Sled" and were stamped on a scrap piece of Basic White card stock using Misty Moonlight ink. I cut it out using a die from the "Spotlight on Nature" bundle. I used glue on the left side and a Dimensional on the right side. Then I set the whole piece in place on the front of the card.

I cut three snowflakes using the die from the "Snowy Wonder" using scraps of Basic White card stock. I used a little glue on some of the tips and I set them in place on the front of the card. I also added three crystal rhinestones to the centers of each of the snowflakes because I didn't like the opening in them. And that was it.

No wait, it wasn't it. I didn't like the face of the snowman so I took a pencil and lightly drew an almost full circle to show where the carrot had been. It just looked too empty and smooth there and now I REALLY love this snowman.

This was a fun and easy card to make. Even the fussy cutting wasn't bad at all. The bunny had a few curves but it wasn't bad.

Thank you SO very much for taking your time to stop in and see today's Christmas card,
Wanda

Wednesday, August 07, 2024

Adventurous Sky, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. I had made this card the other day and thought I had posted it. No wonder I had to scramble to make one that evening. I think I really need to take a day and clean off my worktable. This was a fun and simple card to make. Please read on to see how it was done.

The base of my card is a folded half-sheet of Night of Navy card stock. It open on the right and the fold is on the left. 

A 4"x 5-1/4" piece of Night of Navy was cut for the layer.

The Designer Series Paper (DSP) was cut next. It's from the "Take to the Sky" 12" x 12" package. The piece on the left was cut at 5" x 1-5/8". The top right piece was cut at 2" x 3-1/4" and the bottom piece was cut at 2" x 1-5/8".  I taped them to the layer piece.

I cut the plane from the "Adventurous Sky" bundle. I used Copper Clay for the body and Smoky Slate for the wings. I also cut the propellers using Basic Black card stock. The die cuts two and I used them both. The other areas that look dark were colored in using my Basic Black marker, including the tires. I glued the pieces to the plane together. Dimensionals were added to the back of the plane and it was set in place on the front of the card but I didn't press down on it yet.

The words were from the same "Adventurous Sky" bundle and were stamp using Night of Navy ink on a piece of Basic White card stock. I cut them out using the cloud die from the bundle. I also cut a few more clouds at the same time. Dimensionals were added to the back and they were set in place on the front of the card. There was two small clouds that I just taped in place (no Dimensionals).  I pressed down on the pieces so they were affixed to the front of the card.

A 4" x 5-1/4" piece of Basic White card stock was added to the inside and the card was done.

This was a fun and quick card to make. I like how it turned out and I especially love the DSP background.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Tuesday, May 28, 2024

Simply Zinnia, Best Family Ever, Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a card to share with you that I found on Pinterest. You can see the original card here. I did make some changes because I was using what I had and I made it work. I think it's great when you can find a card you like and have other items that help you make the card to your liking. Please read on to see how I made the card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I cut a 4" x 5-1/4" piece of Melon Mambo card stock for the layer. I stamped the flower from the "Simply Zinnia" set using Melon Mambo ink. I thought it looked pretty close to the Designer Series Paper (DSP) that was used on the original card. I made it work!

Next I cut the rectangle using the 5th die in the "Deckled Rectangles" die set on a piece of Basic White card stock. Dimensionals were added to the back and the piece was set in place on the front of the card about 3/4" from the fold and the top of the card. I eyed it and got it close enough. Wherever you put it it will look great. 

The flowers were die cut next. I cut two using Melon Mambo and Calypso Coral and one from Berry Burst card stock. The edges on the flowers were lightly sponged using Melon Mambo ink. The Calypso Coral piece is on the bottom, then the Berry Burst and Melon Mambo is on the top. I glued them together. I curled up the petals a little but I often wonder how flat they get in the mail.

The center of the flowers were cut the very center is from Pumpkin Pie card stock and the outer ring is from Daffodil Delight card stock. I glued those pieces in place.

The stem and leaves were cut using the same dies in the "Simply Zinnia" bundle on some Garden Green card stock. I glued the stem to the flower first. On the backside it goes up pretty far on the flower because the stem needed to hang beyond the rectangle about 3/8". 

I glued the flower with the stem onto the rectangle and then the leaves were added, first the right one and then the left one on top of it.

The words are from the "Best Family Ever" set using Garden Green ink on a scrap piece of Basic White card stock.  I cut them using the ribbon die from the "Stylish Shapes" set. Dimensionals were added to the back. Where the "y" is in birthday I stacked two Dimensionals so it would stay level with the left part of the word piece,

I colored some pearls using my Melon Mambo Blends pen and set them in place on the front of the card. I also used a few uncolored pearls. The pearls were set in place on the front of the card and the card was done.

I made it work and I'm pleased with how it turned out.  What do you think?

Thank you for taking your time to stop in and see today's card,
Wanda


Monday, March 18, 2024

Days to Remember, Around the Bend, Fresh as a Daisy, Birthday Card, Stampin Up!

Hello and welcome to my blog. Today I have a fun card to share with you and it's got lots of pieces. It took more than the usual 20 minutes or so to make but it's SO worth it. I saw a card that Vicki from "Heartwarmers from Vicki" had made and I thought I'd give it a try. You can see her card here from her March 15, 2024 post. There's no direct link to the card, just to the blog. I love her little bunnies. I didn't have any bunny dies and I had to think of what I had that would fit in those squares and I ended up with the flowers. Please read on to see how the card was made.

The base of the card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. I took the card to my paper cutter and cut off 2-1/8" from the front.

I taped on a 1-7/8" x 5-1/4" piece of Designer Series Paper (DSP) from the "Fresh as a Daisy" 12" x 12" package. I also took another piece of the DSP that measures 2-1/4" x 2-1/4", it was cut diagonally and then taped to the inside of the card on the upper and lower right side. 

On the inside I also taped two layered pieces. The Boho Blue measures 2-7/8" x 2-7/8" and the Basic White piece measures 2-5/8" 2-5/8". I taped those two pieces together and then taped that to the inside of the card.

The flowers are from the "Around the Bend" bundle. I die cut 6 of them. Then I sponged on some Boho Blue to the tips. I glued two together. The center is a die cut piece of Copper Clay and glued to the center of each flower.

Next I cut three 1-3/4" x 1-3/4" pieces of Boho Blue card stock and four 1-1/2" x 1-1/2" piece of Basic White card stock for the squares for the front. I taped the two pieces together and I set aside the one Basic White piece left. I taped two of the squares in place first, the top and the bottom. I lied up the tip with the bottom and edge of the DSP. I thought the center one was a bit more difficult to put on. I added a tiny bit of tape where I thought it would touch the front inside of the card and then I set the piece on the inside of the card so I could line it up with the layers already taped down. Once lined up I shut the card and pressed down so it picked the square off the inside. Then I pulled the edges back a little and added a dot of glue on three tips (one at a time) and that piece was now affixed to the card. On the back of that piece I added the other Basic White square. But before taping it in place I stamped the words from the "Days to Remember" set using Boho Blue ink.

The flowers were set in place using glue dots and the card was done.

All in all it was fun but it does have lots of pieces to play with and I did lose one of the Basic White pieces. Who knows where it went! It's somewhere on my worktable. I didn't keep all the pieces in one spot and that's what happens. And then I wonder if I really did cut four or was it just three?  LOL.  I just cut another one and saved myself some time in hunting!

I am pleased with the looks of this birthday card.

Thank you so very much for taking your time to stop in and see today's birthday card,
Wanda


Sunday, February 25, 2024

Flight & Airy, Friendship Card, Stampin' Up!

Hello and welcome to my blog. I have a card to share with you that I happened on by a happy accident. When I was making the card I posted yesterday I had punched out several birds using the "Heartfelt Hexagon" punch. I just left them sitting on my worktable (of course I did) after finishing my card. I had opened up Pinterest today and this layout for the birds happened to pop up.  How uncanny is that? You can see the original card here. It's got a fun fold but I didn't make mine that way. Please read on to see how I made it.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4" x 5-1/4" piece of Designer Series Paper (DSP) from the "Flight & Airy" 12" x 12" package. I taped this piece to the front of the card. 

A 1" x 5-1/4" piece of DSP from the same package was cut for the side strip. And a 1/2" x 5-1/4" piece of Flirty Flamingo card stock was cut and taped to the back of the 1" strip. About 1/8" piece of the Flirty Flamingo piece was left showing. This was then taped to the front of the card.

The birds are from the "Flight & Airy" package using the "Heartfelt Hexagon" punch. I taped the top and bottom one in place and the center one was added using Dimensionals.

Pearls were added to the sides of each hexagon and the card was done.

I think it's a pretty card but one that I don't usually make cards with no words on the front. I'm not sure what occasion this would fall under. I'm sure quite a few like Anniversary, thinking of you, Birthday, Wedding?  Not sure. I prefer cards with words on the front. It was fun to make and I do like the pretty colors. I'm amazed at how many cards can be made using the "Flight & Airy" DSP. Makes me wonder if I should have just gotten the paper instead of all the other stamp sets I bought and have hardly used because I keep making cards with this beautiful paper. LOL

Thank you SO much for stopping in to see today's card,
Wanda

Thursday, January 11, 2024

Heartfelt Hexagon, Sympathy Card, Stampin' Up!

Hello and welcome to my blog. Today I have a simple and pretty card to share with you today. Please read on to see how I made today's card.

I began with a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left.

I cut a 4-1/8" x 5-3/8" piece of Gorgeous Grape card stock and textured it using the "Distressed Tile" embossing folder. I glued that to the Basic White card base.

Next I cut a 4-1/4" x 3-1/8" piece of Basic White card stock for the top layer. On that top layer I taped a 3" x 3" piece of Designer Series Paper (DSP) from the "Perennial Lavender" 12" x 12" package. I taped it to the upper part of the layer. 

The words were stamped next. They are from the "Heartfelt Hexagon" set and were stamped using Gorgeous Grape ink.

A piece of ribbon was added (mine is retired) I cut it 7" long and taped the ends around the backside of the piece. I slipped a piece of ribbon (still on the spool) under the taped ribbon and tied a knot. Then I cut the ribbon from the spool.  The piece was glued to the front of the card and the card was done

I like this layout and I lie how quick this card was to put together. You can make 16 cards using one 12" x 12" sheet of DSP with this layout!  Imagine using up your DSP making cards with different sayings. Kind of like a One Sheet Wonder!

Thank you SO very much for taking your time to stop in and see today's sympathy card,
Wanda


Tuesday, November 07, 2023

Autumn Leaves, Days to Remember, Pick of the Patch, Masculine Fall Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I took the other pieces of the "One Sheet Wonder" pumpkin paper that I made a few weeks back.  I has used the "Pick of the Patch" set to make the full sheet. It took a while to do because I had to stamp off and then spritz the image and then stamp on the card stock. I stuck with it and got the whole sheet filled. Then I used my Blending Brush to scrub on some more color around the whole sheet. Yesterday I cut a quarter sheet from the full sheet and used part of it. Today I'm using the other part that measures 2-1/2" x 4". Please read on to see how I made today's card.

The base of the card is a folded sheet of Basic White card stock. I taped the "One Sheet Wonder" piece to it on the left. 

On the right I glued a piece of Garden Green card stock that measured 1-1/2" and was textured using the "Painted Texture" embossing folder. 

A 1/4" piece of Pumpkin Pie card stock was cut for the strip between the two affixed pieces. I glued that strip in place.

The leaves are from the "Autumn Leaves" bundle and were die cut using the "Oxidized Copper" Designer Series Paper (DSP) and gold foil paper. I glued the two gold ones down and the copper one was set in place using Dimensionals.  I had colored a long piece of white piece of Baker's Twine using my dark Pumpkin Pie Blends pen. I tied a bow and glued it on top of the copper leaf.

The words are from the "Days to Remember" set and were stamped on a scrap piece of Basic White card stock using Garden Green ink. I punched them out using the "Double Oval" punch.  I punched out a Pumpkin Pie scalloped oval piece using the same punch. I taped the ovals together and set them in place using Dimensionals.

I had some retired rhinestones I added to give the card a little bling.  I didn't want to add too much bling since it's supposed to be a masculine card but it goes either way.  And that was it.

I like how it looked but I like yesterday's card better.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Monday, November 06, 2023

Autumn Leaves, Pick of the Patch, Days to Remember, Oxidized Copper, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine birthday card to share with you. I had a piece of card stock left over from making a "One Sheet Wonder" a few weeks ago. You can see that card and info by clicking here. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I took a piece of the background paper that I had stamped a few weeks ago. I thought it took a long time to make that "One Sheet Wonder" because every image had to be stamped off and then misted before it was stamped on the card stock. But I stuck with it and filled a full sheet. I made a card with it but forgot about it until I ran across it today. My plan is to use it up! The pumpkins are from the "Pick of the Patch" set. I cut that piece at 1-1/2" x 5-1/4"".  

Next I cut a piece of Garden Green to measure 2-1/2" x 1/4" and I textured it using the "Painted Texture" embossing folder I glued that piece to the left of the card. Then I glued the "One Sheet Wonder" piece in place on the right.

I cut a 5-1/4" x 1/4" piece of pumpkin Pie card stock and glued it where the other two papers met.

The leaves were die cut using the dies from the "Autumn Leaves" set, "Oxidized Copper" Designer Series Paper" (DSP), and gold foil paper. I set the larger leaf in place using Dimensionals. The gold leaf was taped on top of that.

I took a piece of white Baker's Twine and colored it with my dark Pumpkin Pie Blends Pen. I tied a bow. I tied this bow before the ink was completely dry and my fingers were very orange. By the time I removed all the ink from my fingers with alcohol whites the piece was dry. I glued the bow in place on the bottom of the leaves.

The words are from the "Days to Remember" set using Garden Green ink on a scrap piece of Basic White card stock. I punched them out using the "Double Oval" punch. The layer behind it is a scalloped piece punched from the same punch using Pumpkin Pie card stock. I taped the two ovals together. Dimensionals were added to the back and it was set in place on the lower part of the card. 

I had some retired rhinestones from the "Champagne Rhinestone" package and I added them to the front of the card. I thought it could use some bling and I didn't buy anything current because I have plenty of retired to use up.

This was a fun card to make and it's got a nice masculine touch to it.  I may have to play with the rest of the piece I cut off tomorrow and see if I can come up with something better.

Thank you SO much for taking your time to stop in and see today's masculine birthday card,
Wanda 

Saturday, September 30, 2023

Pick of the Patch, Color & Contour, Thank You or Thanksgiving Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick and fun card to share with you.

Ten days ago I had made a card using the "One Sheet Wonder" technique. I had filled the whole sheet of card stock. You can see the pumpkins here.  I had made it by stamping off and when I stamped off I had stamped onto another piece of card stock thinking I'd be using it for something. It just seemed like a shame to waste a good pumpkin! Well, today was the day I used it. Please read on to see how I made today's card. 

The base of my card is a folded half-sheet of Basic White card stock. The card opens on the bottom and the fold is on the top.

I took that piece of card stock I stamped all of those pumpkins on and scrubbed on a little Pumpkin Pie, Cajun Craze and Old Olive ink using my Blending Brush.  I cut it to 4" x 5-1/4" and taped it to the card base.

Next I die cut the scalloped rectangle from the "Color & Contour" bundle using Basic White card stock.

On that rectangle I stamped two pumpkins from the "Pick of the Patch" set using Pumpkin Pie ink. I also stamped the curly vines using Old Olive ink.

The leaves were stamped using Old Olive ink and were punched out using the matching punch. And the stems were stamped using Pecan Pie ink and were punched out as well. 

For the center pumpkin I stamped it using Calypso Coral ink and I punched it out using the matching punch. 

The leaved and stems were glued in place and the smaller pumpkin was set in place using Dimensionals. Dimensionals were also added to the back of the rectangle piece and it was set in place on the lower right of the card.

The words are from the "Color & Contour" set and were stamped using Old Olive ink on Basic White card stock. I die cut them using the 1-5/8" circle die and an Old Olive scalloped piece was made using the next size larger scalloped circle, both from the "Layering Circles" die set. I taped the circles together. Dimensionals were added to the back and the piece was set in place on the front of the card. I had added a dot of glue on the upper left corner of the rectangle so the circle would be held down securely.  And the card was done.

This was a fun card to make and I was glad I was able to use the piece of card stock I had stamped on so I could create my "One Sheet Wonder".  I have one more pumpkin quarter sheet to use and I'm not sure what I will be doing with it yet but I'm sure I'll think of something.

Thank you SO very much for taking your time to stop in and see today's thank you/Thanksgiving card,
Wanda

Wednesday, September 20, 2023

Pick of the Patch, Halloween Card, Stampin' Up!

Hello and welcome to my blog. Today I have a fun Halloween card to share with you. Please read on to see how I made the card.

The base of my card is a folded half-sheet of Granny Apple Green card stock. It opens on the right and the fold is on the left. I cut a 4" x 5-1/4" piece of Basic White card stock and taped it to the inside.

Next I cut a 4" x 5-1/4' piece of Crushed Curry card stock and textured it using the "Painted Texture" embossing folder. I glued that to the Granny Apple Green card base.

The scattered pumpkins background paper was done by using the "One Sheet Wonder" technique. You can click here to see more items I've made using this technique. If you've never done this technique, it's fun and depending on what you are going to be doing it can either be quick or take a while. Mine took a while because I stamped off and then misted the stamp and then stamped onto my card stock. I did do a full 8-1/2" x 11" sheet of Basic White card stock. The first thing I did was to take my Blending Brush and lightly scrub on some Pumpkin Pie and Garden Green ink. Then the pumpkins were added, the stems followed and don't forget about the curly greens. All of these items were stamped off once, spritzed with water and stamped on the card stock. Once it was done I gave the full sheet a bit of a spritz (about 8" away). I let it dry. It did curl up a bit but I wasn't concerned because I figured I would just glue the card stock and it would lay flat.

I cut a piece of my pumpkin sheet to measure 2" x 4-3/4". The Pumpkin Pie card stock layer behind it was cut at 2-1/4" x 5". I glued the stamped piece to the Pumpkin Pie piece. I then glued this to the textured Crushed Curry piece.

The pumpkins were stamped using Pumpkin Pie ink on the larger one and Cajun Craze on the smaller one. I had made these a while ago and they were in a little baggie inside my stamp set for future use and safe keeping. I stamped one of each of the leaves in the set using Garden Green. I fussy cut them and then took my Garden Green marker and traced around them to hide any white showing from not so perfect cutting. The pumpkins had been punched out using the matching punch. I also stamped two stems using Pecan Pie ink and punched them out too. I glued the pieces to the tops of the pumpkins. I made a little slit in the larger leaf and slipped it under the stem of the larger pumpkin.

Using Garden Green ink on Basic White card stock, I stamped the words from the same "Pick of the Patch" set. I trimmed it to measure 3/4" x 2". The Pumpkin Pie layer was cut at 1" x 2-1/4" and the Granny Apple Green layer was cut at 1-1/4" x 2-1/2". I taped these layers together. Then the piece was set in place on the front of the card using Dimensionals.

The pumpkins were added using glue on the bottom part and Dimenisonals on the upper part. I made sure I got a Dimensional to stick where the leaves and stems were to help hold them in place and to support them. And that was it.  

Even though it did take me a while to make the background piece, it was worth it and I still have a lot of that sheet left to play with.

Thank you SO very much for taking your time to stop in and see today's Halloween card,
Wanda