Pin It

Showing posts sorted by relevance for query one sheet wonder. Sort by date Show all posts
Showing posts sorted by relevance for query one sheet wonder. Sort by date Show all posts

Thursday, March 31, 2022

Artistically Inked, Thank You Card, One Sheet Wonder Technique, Stampin' Up!

I have not done a "One Sheet Wonder" in a long time. When I've done them I've often just used a half sheet of card stock but here I used a full sheet. It was quick and easy and I got 4 cards out of the deal!  I found this card here. 

The base of the card is a folded half-sheet of Basic White card stock. I cut a 4" x 5-1/4" piece of Fresh Freesia card stock for the layer.  Then I took a half-sheet of Soft Sea Foam and I cut it into 8 strips so I could tape one to each side of the card. I only needed a hair of it showing.  So you can cut your strips as small as 1/2" each. 

To make my "One Sheet Wonder" I took a full sheet of Basic White card stock and stamped all over it. The  "Artistically Inked" stamp set was used here. I used Flirty Flamingo for the larger flowers. Highland Heather was used for the smaller flower and a really small flower was stamped on the inside of the Flirty Flamingo flowers. The leaves were stamped using Soft Sea Foam ink. And the dots were stamped using black Memento ink.

The "thanks" is from the same set and was stamped using black Memento ink. I cut my sheet to 3-3/4" x 5-1/8".  The Soft Sea Foam strips were cut at 5-1/8" long x 1/2".  And the Highland Heather piece was cut at 4" x 5-1/4".

I taped the Soft Sea Foam Strips to the "One Sheet Wonder" piece. Then I tied a ribbon around it. I like to wrap the ribbon around the piece (the ribbon is about 6" long. I use snail tape first and than add scotch tape to make sure it stays in place. Then that piece was taped to the Highland Heather piece and then that was taped to the card base.

A piece of ribbon was slipped under the taped ribbon and a knot was tied.  And the card was done!

Not only is it a "One Sheet Wonder" but a quick one at that too!  Now I have 4 cards that were made in hardly any time at all! And I love the colors. I'm SO ready for spring colors. All of our snow is melted but it's still very brown out there. 

This was a very fun card to make and I really like "One Sheet Wonders"!

Thank you SO much for taking your time to stop by and see today's thank you card and fun technique,
Wanda

To assemble the card, I taped the Soft Sea Foam strips to the 


Monday, April 20, 2020

Positive Thoughts, Here's a Card, Detailed Bands, Birthday Card, One Sheet Wonder Technique

While looking at some fun cards on Pinterest, I ran across one that used the old "One Sheet Wonder" technique.  You can see that card here.  

I had not done the One Sheet Wonder technique in a very long time.  So I got out a sheet of Whisper White car stock.  I now wished I had not used a whole sheet. It was kind of hard to get the images squished in enough to look full.  I ended up added a few more butterflies to mine to get it to look fuller.  I will probably put the rest of that sheet in recycling. I did ruin a half of it by trying to fill in some of the gaps. It looks like I tried to fill in some of the gaps!!! LOL

So here is what I ended up with.

I cut the One Sheet Wonder piece to 2-1/8" x 5-1/2".  

I cut a piece of Pear Pizzaz card stock to 2-3/8" x 5-1/2".  I taped those two pieces together and then taped them to the card base.  My card base is a folded half-sheet of Whisper White card stock. This card opens at the bottom and the fold is at the top.

I stamped the words from the "Here's a Card" set using black Memento ink on Whisper White card stock.  

I die cut the fancy frame for the words using the "Detailed Bands" dies and Pear Pizzazz card stock.

I taped the words to the fancy frame and then I added taped the frame on the sides and center and set it in place on top of the card.

The card was done. It's a quick way to make a fancy looking card.  I think I'd like to try the One Sheet Wonder again sometime using a different stamp set or maybe a smaller piece of Whisper White card stock.  Maybe I'd figure out how big I want my piece of card stock to be first and then cut it to suit my needs and then stamp.  I'll have to experiment and share my results with you then.

Thank you ever SO much for taking the time to stop by today,
Wanda

Monday, May 17, 2010

Fun & Fast Notes Birthday Card

I had just a little piece of my One Sheet Wonder left so I thought I would use it to make a birthday card. I didn't have a plan for this card when I started it and I had no idea what set I was going to use either. SO I thought I would just look through the book I keep the images of the sets I own and see what I could find.

The Stampin' Up! "Fun & Fast Notes" had a cute birthday cake in it so I went with that one.

It was easy enough to figure out what to do with the background. I took Pale Plum card stock to match and compliment the flowers on the One Sheet Wonder part. Then I took a piece of Mellow Moss and ran it through my Big Kick with the new "Square Lattice" embossing folder. I just LOVE this folder. It works SO well with masculine cards too!

Before I taped the One Sheet Wonder piece in place I taped the ribbon around it. After I set it in place I added a little piece of ribbon for the bow. I LOVE doing my bows like that because it allows me to move it to one side or the other. I can center it perfectly if I want! Gotta LOVE that!

I colored in the cake image and layered it on top of a piece of Pale Plum. I taped it in place and that was it. It was a very quick card to make. Those One Sheet Wonder pieces help making a card not only pretty but quick too!

When I had first set the One Sheet Wonder piece on the card stock I was thinking about using the "Happy Birthday" words I printed out on the computer. The image I used had the words on it. But those other words are something I fall back on when I'm doing cards and it just dawned on me why. It's because I'm lazy!!! I printed out a sheet of them to use when I need. SO I thought I would take a birthday words stamp and stamp a bunch of them on some card stock so I have it on hand. I don't like getting out a word stamp and then having to clean the StazOn off it. It's easier to punch out one of the printed ones. SO next time I make a birthday card I'm going to stamp a bunch of words on the card stock so I can use them as I need them. We'll see how that goes. It will be a good test to see if I really am lazy or if it's something else!!

Thank you SO much for visiting today,
Wanda


Monday, April 14, 2008

Candy Fun Project!

First I have to tell you what a FUN time I had yesterday at our DIVA Day event. Sue (my manager) treats us to a day of fun and pampering! She had some fabulous cards for us to make and she gave us another challenge. UGH!!! I will post this months challenge tomorrow. It's amazing some of the stuff she comes up with to challenge us with!!! But we always seem to come through and impress her!!! All of us fellow demo's bring in what we've been working on to show everyone. I refer to that time as "Show and Tell!" It's just amazing at what projects every one's been working on! I always remember to bring my camera with too! There's just too much to see that I can't remember it all so I rely on my camera.

Here's a fun project to use with the Stampin' Up! "Tart & Tangy" set. I got these candies at Cub Foods in the Oriental section. Now keep in mind that I shop there at least once a week. But once a week I go up and down every aisle. I have passed these candies for months and maybe even years. But this time they caught my eye. Actually it was the strawberry ones that caught my eye and then next to them was a bag of lemon and orange mixed. SO keep that in mind if you're going to make these, you will have more strawberry ones if you only buy one bag of each.

I was able to make a "One Sheet Wonder" and cut my pieces needed from that. For those of you who are not familiar with the "One Sheet Wonder" technique I'll fill you in.

For that technique you stamp your images on a single sheet of card stock, filling all the areas you want. You can make it as full as you want or as sparse as you want. When I am going to be cutting it up for smaller pieces I tend to add a lot more items and for larger pieces I use less. You'll get the feel for it once you make one. You can also use it as a background for your card making! But that, in just a few words is how you do a one sheet wonder!

I cut my pieces out and after I stapled the background piece with the little zip bags of candy in them, I layered them on. I stamped my fruits on card stock and then punched them out with the 1-1/4" circle punch. Then I punched out the next layer with the 1-3/8" punch and then I punched out the scallop. I layered them all together and added them to the candy header.

And there you have it! Some fun little gifts to give to your friends, for a hostess gift, customer appreciation gift or just to impress people!!!

And I bet you'd like measurements too!!! Ok since you asked!! LOL

The header piece is 4" x 3-1/4" folded to 2" x 3-1/4". The candy was placed in a 3" x 3" zip baggie. The header piece is then stapled to the baggie. I staple mine so the smooth part of the staple is in the back and the prongs are in the front. This way the layer will hide the prong side and the back side will be smooth and clean looking. Ok, now add your One Sheet Wonder layer and then your scallop layer. That's it. Simple as that!! Have fun!!

This item was made entirely of Stampin' Up! products. To view more cards/items made entirely of Stampin' Up! products click here.

Click here to see more Projects!

Thank you SO much for stopping by,
Wanda

Saturday, May 15, 2010

Another card using a One Sheet Wonder piece. Tomorrow, for those of you who don't know what a One Sheet Wonder Sheet is, I will show you tomorrow.

The little squares here on this card are from the One Sheet Wonder Sheet. The words are from the VERY fun "All Holidays" set. I have gotten SO much use out of that set! I stamped the words in Perfect Plum.

I used the new "Square Lattice" embossing folder. it's got such a cool look to it and if you turn the embossed card stock over it has an entirely different look to it. This kind of reminds me of paper towels! I am anxious to try out some other fun things with this folder. And of course I will share them with you!

I sponged the edges of the word piece and the embossed piece using Pale Plum. I thoughe the Perfect Plum would be a bit too dark and would get lost in the Pale Plum card stock layer behind it.

It's such a vintage looking card, isn't it. Though when you mix the right purples and greens together you get a vintage look.

I have 4 more birthday cards yet to make plus an anniversary card. Then I'm sure I will be swamped next month with graduation cards. But that's ok, Stampin' Up! came out with a brand new graduation set called "Go Graduate." And yes, I did buy it. I didn't own a graduation set before. And this one is just TOO darn cute!! I will have some fun making cards with it but I do need to research some of the schools in the areas to know what their colors are.

I think my friend will love this birthday card. I was happy with the way it turned out.

Thanks SO much for visiting today.
Be sure to stop by tomorrow to see how that One Sheet Wonder is done. You will LOVE it!
Wanda

Monday, April 19, 2021

Beautiful Friendship, Good Morning Magnolia, Thinking of You Card, One Sheet Wonder Card Technique

I have not done a "One Sheet Wonder" (OSW) in years. I found this one on Pinterest and thought I would give it a try. You can see the original card here. I ruined the first one because my Blushing Bride ink pad is one of the old fabric ones and the stamp didn't ink up nicely. And it's not like you can do this on the Stamparatus.  Well, I suppose you could but it would take a very long time. I had the stamp on my clear block and I tried to get a nice image but I wasn't having much luck. So I thought I would change colors and it was too dark. Oh, I even changed the color and stamped on top of what I had already stamped and it was SO muddy looking.  UGH.  I wasn't going to give up. I stuck with it and this is what I ended up with.  Usually a OSW is a full sheet of card stock or Designer Series Paper (DSP).  I used a half-sheet of Basic White card stock.  The link also has a video so you can follow along. Here's how I made my cards.

The base of the piece is a half-sheet of Basic White card stock. I used the hydrangea looking image from the "Beautiful Friendship" set and Rococo Rose ink that I stamped off once before stamping on the card stock. Or you can use the Blushing Bride ink pad if you have a nicer pad than mine!  

Next the large rose image was stamped using Seaside Spray ink. It's stamped all over, back to back in some places and over the Rococo Rose images too.

Then the single rose was stamped using So Saffron ink. It's stamped in a lot of the open areas and it's not only a single stamp but a second generation too for that lighter look around the open areas. 

The leaves were stamped using Pear Pizzazz ink and were stamped three times in a row on top of each other but moved up just a little with each stamping. My third generation image didn't show up as well, so I ended up stamping off once and then adding it near the other leaf images.  

And the last thing you stamp is the dots from the "Waterfront" stamp set. So Saffron ink was used to to stamp the dots. 

The words are from the "Good Morning Magnolia" set and were stamped on a scrap piece of Basic White card stock and die cut using the second smallest "Stitched Circle" dies. 

I cut a 4" x 5-1/4" piece of Seaside Spray.  Actually I cut two because this OSW will make two cards. I die cut a scalloped circle from the center using the Circle dies. It's one that is just a bit larger than the Stitched circle die. 

The words were taped to the scalloped circle and Dimensionals were added to the back.

The OSW was first cut in half at 4-1/4".  Then I cut it down to 3-7/8" x 5-1/8". I cut on the flowered edges so I could keep the white open area open. Then they were taped to the Seaside Spray piece and that was taped to the front of the card base.

The words were set in place in the open white area and the card was done.  Rhinestones, sequins, enamel dots or anything else you think would look great can be added around the card for some shimmer.  Even some Wink of Stella would be pretty.

I changed the orientation of one of the cards. I thought it looked better that way. You'll know if you make them. 

This was a fun card to make once I got the colors to work for me. And I do regret not doing a full sheet of card stock to make four super quick cards.

Thank you SO very much for taking your time to stop by and see this pretty One Sheet Wonder card,
Wanda 

Saturday, March 09, 2013

Secret Garden One Sheet Wonder Technique

I have not done the One Sheet Wonder technique in a very long time.  I saw this card on Pinterest (of course!)  You can see the original here, though I did not deviate far from it.  I thought it was such a stunning card from the minute I set my eyes on it.  And I knew I just HAD to make it.

For this technique you take a sheet of card stock.  Here I used Whisper White.  Then you stamp the images all over it.  Filling in as much or as little space as you like.  I think the upper corner and bottom center could have used just a bit more something!  You can plan these things out once you have cut off what you need for your card.  Anyway, when you are satisfied with your images then you can cut off the size pieces you want to assemble your cards.  You can get quite a few cards from one piece of card stock, depending on how big the piece your cutting is.  I could get  8 pieces of this 2-1/2" size from my sheet.  But I didn't. I put it aside for some other day.  I didn't want to make a bunch of these cards and I didn't want to use some other layout today.  So it will sit in my stash of stuff until I run across it and ooh and aah at it all over again!!! LOL

The base of this card is Crumb Cake.  There's a small piece of Midnight Muse on it and one of my favorite colors, Marina Mist!  And those are also the colors of the ink.  The Marina Mist layer is 1-1/4" x 5-1/4".  The Crumb Cake layer is 1-3/8" x 5-1/4" and the Midnight Muse layer is 1-5/8" x 5-1/4".  I did cut my One Sheet Wonder piece 2-3/4" so I had something to tape the side layers on top of.  You could butt it up against them too, it's all in how good you are at cutting and layering!  I am not and anytime I can just slap one layer on top of another I will do it!!


Once you have all the images stamped, the card goes together rather quickly.  And it was very fun to make too.  I forget how fun One Sheet Wonders are!


Thank you SO very much for visiting today,
Wanda

Tuesday, February 07, 2023

Dainty Flowers, Beautifully Happy, One Sheet Wonder, Birthday Card, Stampin' Up!

Hello. I'm glad to see you made it here today. Remember "One Sheet Wonders"?  I have not done the "One Sheet Wonder" in a long time. I had gotten an email from Terri Gaines and this card was in it. I clicked the link and was taken to her blog where she has a free PDF on how to make this card. You can see that PDF here.  Sign up for her emails! You will see her events too. She has a fun Stamp-a-Stack coming up this month. I LOVE going to them. She's so talented and her cards are always fun to make. She also offers videos on how to stamp and assemble the cards she features and if you watch the videos, give her a thumbs up. 

So for today's card I chose the "One Sheet Wonder" one. I was able to get 10 cards from one 12" x 12" piece of Designer Series Paper (DSP) from the "Dainty Flowers" package. The pieces were cut at 2-3/8" x 5-1/4".  

The base of the card is a folded half-sheet of Mossy Meadow card stock. The card opens on the right and the fold is on the left. 

The DSP was cut at 2-3/8" x 5-1/4" and the Mossy Meadow layer behind it was cut at 2-5/8" x 5-1/2".  I did not make my card the way that Terri had made hers. She has a fancy fold and I'm just making a regular standard card. I taped the DSP to the Mossy Meadow panel.

Old Olive was cut at 4" x 5-1/4" for the top layer. I textured mine using the "Painted Texture" embossing folder. I glued it to the front of the card. Then I glued the panel in place.

The words are from the "Beautifully Happy" set using black Memento ink on a scrap piece of Basic White card stock. I punched them out using the "Double Oval" punch. Then I punched out the scalloped oval from the same punch using a scrap piece of Mossy Meadow. If you don't have a scrap piece you can carefully punch one out using the panel piece before you add the DSP. You need to be careful there because there is not much room between the two ovals on the punch. I've been successful at punching it from the layers many times.

The words were taped to the scalloped oval and that piece was then set in place on the front of the card using Dimensionals.

A 4" x 5-1/4" piece of Basic White card stock was added to the inside and the card was done.

I do like these quick and easy cards. The DSP is SO pretty and you just can't go wrong!

Thank you SO very much for taking your time to stop in and see today's birthday card,
Wanda

Friday, August 25, 2017

Flower Shop, Birthday Card, One Sheet Wonder Technique

It's SO amazing how many cards you get get out of one sheet of card stock using the "One Sheet Wonder" technique.  It's an easy technique.  You just stamp an image, or images all over the card stock and then you cut whatever size pieces you need.  

The base of my card is a folded half-sheet of whisper white card stock.  My "One Sheet Wonder" strip was made using the "Flower Shop" set and Sweet Sugarplum ink and card stock. I took a sponge dauber and inked it up with Sweet Sugarplum ink and added larger round circles to the center of each flower.  

I cut my piece 1-5/8" wide x 5-1/2" long.  The Sweet Sugarplum card stock piece was cut 1-3/4" x 5-1/2".  I taped the two pieces together and set in place on the card. 

The words are from the "Rose Wonder" set. I stamped them using Sweet Sugarplum ink.  And that was it.  Super easy.  Though as I'm looking at it here on the computer, I'm thinking the flower centers could use a small pearl.  

Thank you SO much for visiting today,
Wanda

Monday, November 06, 2023

Autumn Leaves, Pick of the Patch, Days to Remember, Oxidized Copper, Masculine Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I have a masculine birthday card to share with you. I had a piece of card stock left over from making a "One Sheet Wonder" a few weeks ago. You can see that card and info by clicking here. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Basic White card stock. It opens on the right and the fold is on the left. 

I took a piece of the background paper that I had stamped a few weeks ago. I thought it took a long time to make that "One Sheet Wonder" because every image had to be stamped off and then misted before it was stamped on the card stock. But I stuck with it and filled a full sheet. I made a card with it but forgot about it until I ran across it today. My plan is to use it up! The pumpkins are from the "Pick of the Patch" set. I cut that piece at 1-1/2" x 5-1/4"".  

Next I cut a piece of Garden Green to measure 2-1/2" x 1/4" and I textured it using the "Painted Texture" embossing folder I glued that piece to the left of the card. Then I glued the "One Sheet Wonder" piece in place on the right.

I cut a 5-1/4" x 1/4" piece of pumpkin Pie card stock and glued it where the other two papers met.

The leaves were die cut using the dies from the "Autumn Leaves" set, "Oxidized Copper" Designer Series Paper" (DSP), and gold foil paper. I set the larger leaf in place using Dimensionals. The gold leaf was taped on top of that.

I took a piece of white Baker's Twine and colored it with my dark Pumpkin Pie Blends Pen. I tied a bow. I tied this bow before the ink was completely dry and my fingers were very orange. By the time I removed all the ink from my fingers with alcohol whites the piece was dry. I glued the bow in place on the bottom of the leaves.

The words are from the "Days to Remember" set using Garden Green ink on a scrap piece of Basic White card stock. I punched them out using the "Double Oval" punch. The layer behind it is a scalloped piece punched from the same punch using Pumpkin Pie card stock. I taped the two ovals together. Dimensionals were added to the back and it was set in place on the lower part of the card. 

I had some retired rhinestones from the "Champagne Rhinestone" package and I added them to the front of the card. I thought it could use some bling and I didn't buy anything current because I have plenty of retired to use up.

This was a fun card to make and it's got a nice masculine touch to it.  I may have to play with the rest of the piece I cut off tomorrow and see if I can come up with something better.

Thank you SO much for taking your time to stop in and see today's masculine birthday card,
Wanda 

Thursday, August 17, 2023

Textured Floral, Quiet Meadow, Sympathy Card, Stampin' Up!

Hello and welcome to my blog. Today I am going to share with you a card I found on Pinterest. You can see the original card by clicking here. I had clicked through the link to find measurements but there weren't any. SO I had to wing it.  My wing must have been broken because I did encounter a couple of issues.  But I managed to make the card and like how it turned out so it wasn't a total loss, right?  Do you ever buy a stamp set and then regret it?  I do that with almost every new catalog. I was wondering why I purchased this set. I found it a bit difficult to work with but when I saw this card on Pinterest I thought differently about the set. I may even play around with it more because this card inspired me! Please read on to see how I made this card. I'll even tell you my errors along the way so you can adjust your card if you wish.

The base of my card is a folded half-sheet of Basic White card stock. This card opens on the right and the fold is on the left.

I cut a 3" x 4-1/4" piece of Basic White for the focal piece. And a 3-1/4" x 4-1/2" piece of Crushed Curry was cut for the layer. This is where my big mistake came. The pieces should have been bigger. I'm not sure how much bigger though. I didn't realize it until I was going to be adding the words. 

Anyway, I stamped the large flowers from the "Textured Floral" set using Crushed Curry ink. The centers were stamped using the die in the same set with Cajun Craze ink that was stamped off once. 

The leaves were stamped using Old Olive ink and the smaller flowers were stamped using Wild Wheat ink. An extra small flower was also stamped and die cut using the matching die from the same bundle. If you don't have the new Wild Wheat color, you can easily get by with Crumb Cake ink. They look very similar. 

The words I used are from the "Quiet Moments" set (another set I wondered why I bought) and they were stamped using Crushed Curry ink. I had set my words up in my Stamparatus and stamped them a couple of times to get them dark enough.  It's sad that the Stamparatus is retired but you can always get a MISTI stamp positioner. And there's a couple ways to make one too. One is, take a Stampin' Up! stamp case, one of the ones that looks like they would have a DVD in it. Place your card stock on the inside and affix your stamp to the other side. I'd recommend using removable tape to hold your paper in place. You can also add a magnetic sheet to the back of the case and use magnets to hold your card stock down too.  And your other option is to make a Stamp-a-Ma-Jig using Legos.  I prefer the other ways over this one but one does with what they have! So where was I? Oh, once the words were stamped I die cut them using the 1-5/8" die from the "Layering Circles" die set. And the Old Olive layer behind it was made using a circle die from the "Stylish Shapes" set that was just a little bit larger.  I had stamped the words that were on the original card and die cut them. That's when I found out that my floral piece was smaller than the original card. So I adjusted the circles I needed to use and found words that would fit in them. Once the circles were die cut I taped the two pieces together. 

To assemble the card I taped the Basic White floral piece to the Crushed Curry piece. Dimensionals were added to the back and the piece was set in place on the front of the card base. Next the word piece was set in place with Dimensionals. The die cut flower was glued in place. A little glue on the part that touches the word piece and a little on the bottom where it's on the floral stamped piece. Three crystal rhinestones were added and the card was done.

This was a very quick and easy card to make and I do like how it turned out, even with it's minor flaws!! I am thinking how fun it would me to make a One Sheet Wonder sheet. Click here to see how to do the "One Sheet Wonder" technique. It's a great image for a number of other occasions too!

Thank you SO very much for taking your time to stop in and see today's sympathy card,
Wanda

Tuesday, November 07, 2023

Autumn Leaves, Days to Remember, Pick of the Patch, Masculine Fall Birthday Card, Stampin' Up!

Hello and welcome to my blog. Today I took the other pieces of the "One Sheet Wonder" pumpkin paper that I made a few weeks back.  I has used the "Pick of the Patch" set to make the full sheet. It took a while to do because I had to stamp off and then spritz the image and then stamp on the card stock. I stuck with it and got the whole sheet filled. Then I used my Blending Brush to scrub on some more color around the whole sheet. Yesterday I cut a quarter sheet from the full sheet and used part of it. Today I'm using the other part that measures 2-1/2" x 4". Please read on to see how I made today's card.

The base of the card is a folded sheet of Basic White card stock. I taped the "One Sheet Wonder" piece to it on the left. 

On the right I glued a piece of Garden Green card stock that measured 1-1/2" and was textured using the "Painted Texture" embossing folder. 

A 1/4" piece of Pumpkin Pie card stock was cut for the strip between the two affixed pieces. I glued that strip in place.

The leaves are from the "Autumn Leaves" bundle and were die cut using the "Oxidized Copper" Designer Series Paper (DSP) and gold foil paper. I glued the two gold ones down and the copper one was set in place using Dimensionals.  I had colored a long piece of white piece of Baker's Twine using my dark Pumpkin Pie Blends pen. I tied a bow and glued it on top of the copper leaf.

The words are from the "Days to Remember" set and were stamped on a scrap piece of Basic White card stock using Garden Green ink. I punched them out using the "Double Oval" punch.  I punched out a Pumpkin Pie scalloped oval piece using the same punch. I taped the ovals together and set them in place using Dimensionals.

I had some retired rhinestones I added to give the card a little bling.  I didn't want to add too much bling since it's supposed to be a masculine card but it goes either way.  And that was it.

I like how it looked but I like yesterday's card better.

Thank you SO very much for taking your time to stop in and see today's masculine birthday card,
Wanda

Sunday, May 16, 2010

One Sheet Wonder Technique

Yes, this One Sheet Wonder is actually a technique. I had seen it done MANY years ago and it is still popular. Well, most of the techniques are still popular they just don't get used a lot.

For this technique you pick your images and stamp them all over an 8-1/2" x 11" piece of card stock. Add the colors you like and cover the entire page. It kind of looks like a big old mess but when it's cut and used on your cards or projects it really is very pretty.

You can plan out the page if you like to see what size pieces you want out of it or you can just cut and use it as you go. That is what I do. I have no idea what I want for a card until I'm ready to sit down and make it so cutting it like you would the decorative paper is the easiest way to go.

I cut pieces off mine and made a couple of cards last week. I will hang on to what is left of the sheet and use it for future cards. Probably near future cards, I still have more birthday cards to make!! I'm SO far behind on my cards this month! And don't tell hubby but I'm a month and a half behind on the bookkeeping too!!! Shhhhh. I HATE bookkeeping as much as I hate putting my stamping stuff away before moving on to another project!!! LOL

Have fun with these One Sheet Wonders. They make very nice background papers and a sheet can go a long way depending on how big the pieces are you use!

This will be added to the 4th set of Technique pages. Can you believe I got two pages done in less than 7 days? Shocker, huh???

Thank you SO much for visiting today,
Wanda

Tuesday, April 20, 2021

Beautiful Friendship, Peaceful Moments, Thank You Card

I thought I'd give the "One Sheet Wonder" technique another try. Why not since I hadn't put the stamp sets away yet.  LOL Like I put things away right away!!! 

The base of the card is a folded half-sheet of Basic White card stock. I took the larger double rose image from the "Beautiful Friendship" set and stamped it around the edges using Daffodil Delight ink. I stamped it in various directions.  I didn't keep the upper part open like I did when I made yesterday's "One Sheet Wonder".  

Next I stamped the same flowers using Crushed Curry ink. I stamped in the open areas and I stamped over the Daffodil Delight images too.  

The leaves were stamped using Pear Pizzazz ink. They were stamped once and then again before inking it up again. That is where you get the soft muted colors.

This was a quick and easy way to make a fun background image. 

 I cut my piece 1-7/8" x 4-5/8". I made three cards and there was still a nice size piece left for a future card or for my stash so I can run across it someday and whip up a card in no time. I also cut a 2" x 4-3/4" piece of Basic Black card stock for the layer. I didn't tape them together yet.

The words are from the "Peaceful Moments" set and were stamped on a scrap piece of Basic White card stock and were stamped using black Memento.  I die cut them using a stitched oval die. I die cut the scalloped layer from the Basic Black layer I cut for the rose strip. No one will know there's an oval cut from that strip. Or you can use a piece of scrap Basic Black card stock. 

Two 4" x 5-1/4" pieces of Basic White card stock was cut. One for the inside of the card and one for the front.  I textured the front piece using the "Ornate Floral" embossing folder. I glued this to the front of the Basic Black card base.

Next I taped the floral strip and the Basic Black layer together and glued them in place. 

I taped the ovals together and added Dimensionals to the back. I set the oval in place on the front of the card and the card was done. 

What is fun with this layout is you can use it with different orientations. You can put the long strip at the top, like I did here. Or you can put it at the bottom. You can also turn the card so it opens on the right and add the words towards the top, or middle, or bottom. I would use larger words if you're going to do it that way. I made two like the one pictured and one with the words at the top and the panel at the bottom. I liked the panel at the top much better. 

This stamp set is going to be retiring soon and it will be added to my web store sometime in the near future. 

Thank you SO very much for taking your time today to see this fun and easy thank you card,
Wanda


Sunday, May 19, 2013

A Betsy's Blossoms Birthday Stampin' Up!


The blog is doing something weird right now but at least I can finish my post, so I'm just going to let it do what it wants!!!  LOL

Today I found a card on Pinterest that I had pinned a few days ago. I thought it looked like a fun card to make so I made my version of it.  You can see the original card here.   I made my card using Whisper White and the soon to be retiring Regal Rose.  I thought I'd use that color since I had a few sheets left.  It would be great to use them up instead of have them hanging around because they retired before I got to them all.  I did make a One Sheet Wonder using the Betsy's Blossom images.  A One Sheet Wonder is when you stamp all over a piece of card stock and use the sheet as your focal point or for backgrounds.  You cut pieces off it as you need.  They're fun to do and you can make a LOT of cards from one sheet.


I took the two images, the 3 flowers and the larger flower and stuck them to an acrylic block and stamped them all at once.  Another advantage of having clear mount stamps.  

For the butterfly I used the Sizzlet and the Regal Rose decorative paper.  I just set it in place with a dot of glue.  That particular piece was too hard to tape so glue worked better here.

The main panel is set in place using Dimensionals and so is the word piece.  And the scalloped border punch was used for the Regal Rose side piece.  


The "happy birthday" came from the "Teeny Tiny Wishes" set.  And that was it.  SO simple, so quick and very pretty!  FYI, my Regal Rose piece was cut at 3-1/4" x 4-1/2".  

Making cards like this goes quickly and you can whip up quite a few in a short time.  You can make these cards into a fun pack for a gift.  Use different colors for a pretty effect.  

WOW, when I justified the words the post began to look more normal. Let's hope it looks like that when I hit "publish"!  LOL

Thank you SO much for visiting today,
Wanda

Thursday, October 08, 2026

Radiant Sunflower, Scalloped Blooms, Sunflower Field, Thinking of You Card, Stampin' Up!

Hello and welcome to my blog. Today I have a thinking of you card to share with you.  I found a fun one sheet wonder post with several layouts on the internet. You can see the original card by clicking here. Please read on to see how I made today's card.

The base of my card is a folded half-sheet of Crushed Curry. It opens on the right and the fold is on the left. I cut a 4" x 5-1/4" piece of Basic White card stock and taped it to the inside.

Next I cut my Designer Series Paper (DSP) from the "Sunflower Field" 12" x 12" package.  The two pieces of DSP were cut at 4" x 4". They were cut along the diagonal at 1" from the opposite sides. When I cut the second piece I cut the diagonal in the opposite direction.  To clarify, I marked the right side down 1" from the top and on the opposite side, the left side, I marked it 1" from the bottom. And for the other sheet I marked the upper left and bottom right. Once cut at the 1" mark, I taped the top piece to a 4" x 5-1/4" piece of Basic White card stock. Then I stamped the flower from the "Radiant Sunflowers" bundle using Crushed Curry ink.

The words were stamped next. They are from the "Scalloped Blooms" and were stamped using Early Espresso ink. I didn't have the same wording as on the original card. That one was done using hot foiling. I don't have that machine (it's on my Christmas wish list. With my fingers crossed. And maybe birthday too! For the rest of my life! LOL).  I just made do with whaat I have. 

Once the words were stamped I taped the bottom piece of DSP in place.

The flowers are from the "Radiant Sunflowers" bundle and were cut using Cajun Craze for the carnation looking flower. On the sunflower shaped one I used Crushed Curry and Early Espresso for the center. The fun thing about the die for the sunflower is that you get to cut two at a time. So I cut two centers at the same time too and I have an extra flower for later.  The leaf in the bundle was stamped using Mossy Meadow ink on Mossy Meadow card stock. It was cut out using the matching die. When cutting the leaf out I also cut some leaves on stems because I needed a couple of tiny leaves and my scrap piece of card stock had room to add them, so why not? 

The carnation looking piece was set in place using a dimensional. The sunflower was added with another dimensional. I added glue to the leaves and tucked them under the sunflower.

I didn't have the green gingham ribbon but I did have a brown in my stash, so I used that and I thought it worked out well.

I had some little glass raindrops that I colored using a Blends pen. I don't like coloring them with my blends pen because I find it ruins the tips. I did save my Blends pens with the ruined tips for two reasons. One is so I could color things such as this and the other is that if it's replacement dries out I might be able to switch the barrels inside and have a working pen. I haven't had to do that yet but I do have a number of ruined pens on hand. It seems that it's the brush side of the pen that gets ruined and the other writing end is still good. So that's another reason not to toss them.

Anyway, this was a fun, quick and easy card to make. I love this layout. Next time I do it, I'm just going to use 4" x 4" pieces of DSP. I tend to cut my sheets at 4" x 12" when I need a piece for the front of a card, so I'm 1/3rd the way there. No need to cut the 6" x 6" piece for me! I'm sure I will be making cards with the other parts of the One Sheet Wonder.  

I have some Christmas sets and pieces stamped that I want to work on but I need to play with Halloween and fall a bit more before I move on to Christmas. My plan is to use up as much of the DSP as I can so I don't have it sitting around here. I have SO much in my stash. I'd love to say that I will be using it up soon but we all know that's not going to happen. LOL

Thank you SO very much for taking your time to stop in and see today's thinking of you card,
Wanda


Monday, February 05, 2018

Heartfelt Blossoms, Thinking Of You Card, 2018 Sale-a-Brations, One Sheet Wonder Technique

I have not made a "One Sheet Wonder" (OSW) card in a long time.  When you use a full sheet of card stock you are not only making one card but you are making four!! I stamped my images and then cut my card stock in to four pieces.  I found the technique using the "Heartfelt Blooms" image here.  

I started out stamping the image in the center of the card stock using Powder Pink ink.  Then I stamped the Calypso Coral ink.  Looking at the card stock and having the Powder Pink image being the center, view the card stock as a clock when placing the following colors.  The Calypso Coral was stamped at the 5, 9, and 1 o'clock position.  And the Melon Mambo was stamped at the 11,2, and 7 o'clock position.  Then fill in the open areas with a color that is not the same as the one you are stamping next to.  It's easy and you really can't make any mistakes.  I put the "wrong" color in one spot and it looked just fine.  Fill in and you are done!  Cut the card stock into pieces and make some fun cards.  Here I cut mine at 3-3/4" x 5".  I cut the Calypso Coral card stock layer at 4" x 5-1/4" and I used a folded half sheet of Whisper White for the card base.

After I taped the OSW piece to the Calypso Coral piece, I added a 1-1/4" x 5-1/4" strip of Melon Mambo card stock at an angle.  I let the ends hang over and cut them off by hand once I taped them in place.  Then I tied some of the new pink "Love" mini tinsel trim to that strip and around the card.  

The words are from the "Heartfelt Blossoms" set and were stamped using Melon Mambo ink.  I punched them out using the "Tailored Tag" punch. I also punched out a Powder Pink piece and cut it in half the long way. I taped each half to the back of the word piece. I set that piece in place using Dimensionals and that was it.  I had 4 quick cards!!!

Thank you SO much for visiting today,
Wanda

Tuesday, July 06, 2021

Color & Contour, Thank You Card, One Sheet Wonder Technique, 2021-2022 Stampin' Up! Catalog

I thought I'd play with my new "Color & Contour" set and try the "One Sheet Wonder" technique.  I do like monochromatic cards but not so much this one. But as I always do, I share the good, the bad and the ugly with you!

The base of my card is a folded half-sheet of Basic White card stock. This card opens on the right and the fold is on the left.

Next I took a quarter sheet of Basic White card stock and stamped the flower from the "Color & Contour" set using Melon Mambo ink. I don't know why I chose that color, maybe it's because I have a lot of card stock on hand.  I sponged the center of the flowers wih Melon Mambo ink too. After the flower were done, I cut the piece 1-3/4" wide so it measured 1-3/4" x 5-1/2".  

A Melon Mambo strip was cut for the layer. It measured 2" x 5-3/4". I taped the two pieces together. I laid them on top of the card so I could see where to place the words. Looking at the card here and still thinking it needs something, I thought that maybe I should have done the words using black Memento ink instead. There's just too much "pink" on the card.  Well, I do have a strip left because I did a full quarter sheet of flowers. I'll give it a try and see if  like it better. I'm pretty sure I will.  

After stamping the words I taped the strip down and the card was done.  This is also a great layout to use up some of those scraps of Designer Series Paper (DSP) too.  I have lots of those type pieces and you can make the strip as wide or as narrow as you wish as long as your words fit in the open area.

This is a quick card to make but I'm not a big fan. 

Thank you SO very much for taking your time to stop by today and see today's blunder!
Wanda

Saturday, September 30, 2023

Pick of the Patch, Color & Contour, Thank You or Thanksgiving Card, Stampin' Up!

Hello and welcome to my blog. Today I have a quick and fun card to share with you.

Ten days ago I had made a card using the "One Sheet Wonder" technique. I had filled the whole sheet of card stock. You can see the pumpkins here.  I had made it by stamping off and when I stamped off I had stamped onto another piece of card stock thinking I'd be using it for something. It just seemed like a shame to waste a good pumpkin! Well, today was the day I used it. Please read on to see how I made today's card. 

The base of my card is a folded half-sheet of Basic White card stock. The card opens on the bottom and the fold is on the top.

I took that piece of card stock I stamped all of those pumpkins on and scrubbed on a little Pumpkin Pie, Cajun Craze and Old Olive ink using my Blending Brush.  I cut it to 4" x 5-1/4" and taped it to the card base.

Next I die cut the scalloped rectangle from the "Color & Contour" bundle using Basic White card stock.

On that rectangle I stamped two pumpkins from the "Pick of the Patch" set using Pumpkin Pie ink. I also stamped the curly vines using Old Olive ink.

The leaves were stamped using Old Olive ink and were punched out using the matching punch. And the stems were stamped using Pecan Pie ink and were punched out as well. 

For the center pumpkin I stamped it using Calypso Coral ink and I punched it out using the matching punch. 

The leaved and stems were glued in place and the smaller pumpkin was set in place using Dimensionals. Dimensionals were also added to the back of the rectangle piece and it was set in place on the lower right of the card.

The words are from the "Color & Contour" set and were stamped using Old Olive ink on Basic White card stock. I die cut them using the 1-5/8" circle die and an Old Olive scalloped piece was made using the next size larger scalloped circle, both from the "Layering Circles" die set. I taped the circles together. Dimensionals were added to the back and the piece was set in place on the front of the card. I had added a dot of glue on the upper left corner of the rectangle so the circle would be held down securely.  And the card was done.

This was a fun card to make and I was glad I was able to use the piece of card stock I had stamped on so I could create my "One Sheet Wonder".  I have one more pumpkin quarter sheet to use and I'm not sure what I will be doing with it yet but I'm sure I'll think of something.

Thank you SO very much for taking your time to stop in and see today's thank you/Thanksgiving card,
Wanda

Monday, June 02, 2014

A Gorgeous Grunge Summer Silhouettes Birthday

I LOVE the "One Sheet Wonder" technique.  It's the one where you take a full piece of card stock and stamp all over it.  When you are done you cut it into pieces for your cards.  Here I used Pumpkin Pie and Crumb Cake ink.  You stamp on the image and then stamp again without re-inking.  It gives you a nice muted look in between the open spaces.  I used the "Gorgeous Grunge" set to do this.

Then I stamped the flower.  I used the "Summer Silhouettes" set with Pumpkin Pie and Pear Pizzazz ink pads.

The words were done on my computer.  I usually print out a full sheet of them and punch them out using the 1-1/4" circle punch and save them for when I need to make a quick card or when I need words to fit in one of these types of circle layers.

This was a very quick card to make.  Now I have some extra backgrounds from the "One Sheet Wonder" page I made and I have some extra " Happy Birthday" circles in my stash!!!  I'm ready if I need a super quick card.  It's always good to have a stash.  You can find some fun things in it that you didn't think would go together!!!  

This was a fun card to make.  I like the colors but I'm not crazy about them.  They remind me of fall and I'm not ready for fall yet. We just had the worst winter here in Minnesota and I actually said (out loud) that I hated winter!  I have never said that in my life!  So I'm going to head back towards the fun spring and summer colors for a while and I will ease into the fall colors as the season approaches.  Or unless I find a card that I just HAVE to make and it has fall colors!

Thank you SO much for visiting today,
Wanda