Pin It

Wednesday, September 30, 2015

A Birthday Blossoms Wedding Card

I received this card from Juliann, one of the talented ladies have the pleasure of seeing once a month!

This looks like such a fun and wonderful card.  The flower is from the "Birthday Blossoms" set.  There is a silver foil paper flower punched out and layered behind the stamped flower.

I do not know what set the words are from.

The decorative paper is from the Neutrals 12" x 12" paper pack.

There is another fun aspect to this card.  There is a gap between the top panel and the bottom one.  The bottom one is attached by the center word panel.  I don't know what this technique is called, but I do like it and I think it would be easy to do too!

This is such a pretty wedding card.  

Thank you SO much for visiting today,
Wanda

Tuesday, September 29, 2015

A Sparkly Season Corner Flip Technique Christmas Card

Today I played with the Corner Flip Card technique again.  It's such a fun technique. It's quick, easy and adds some character to your cards.  You can find the directions for this technique here.  

I have not made a shaker card in a while and now I remember why.  I think they are kind of messy to make plus you have to be pretty precise when assembling them!!!  I managed to muddle through it and this is what I came up with.

I don't have this set, I had borrowed my sisters set and made a few extra images before she got her stamps and dies back.  I kind of wished I would have stamped more.  I may have to so some begging and groveling!!! LOL

The "Merry" is from the retire "Expressions" Thinlits.  Since I returned my sister's stuff, I didn't have the word "snow" or I would have used it on the bottom of this card.  And I didn't think I would need any words, so I didn't make any to have on hand.  I know, I just wasn't thinking!!! LOL

Even with the retired words, I do like how this card turned out!  Give this Corner Flip Card technique a try!!!  I think you will find lots of uses for it!!

Thank you SO much for visiting today,
Wanda


Monday, September 28, 2015

Corner Flip Into the Woods Decorative Paper Card

Today's card is from Terri's FABULOUS Technique Tuesday group.  I was invited to play along with the group. I am there to help set up and take down but lately Terri has been having me play along with the gals.  She is SO good to me.  

To make this fun card you need a piece of 8-1/2" x 5-1/2" piece of card stock.  Before you fold it in half you will want to use your 12" trimmer and place the left side of your card stock at the 3" mark, start the cutting blade at 4-7/8" and move up to 2-1/2" on the long side.  Turn your card stock 1/4 turn, counter clockwise, (this is the short side), place the left edge of your card stock at the 3" mark.  Start the cutting blade at the 5/8" mark and move down to the 3" mark.  

Fold your card in half.  Take the top right corner of the card and fold it towards the folded side.  Do this slowly, you want that center piece to flip and you want to line up the sides so they are square with the top and right side of the card.  Use your bone folder to crease the card.  Decorate as you wish. 

Here Terri had us decorate the card with the new "Into the Woods" decorative paper.  Many of the images on the paper are just far enough apart to punch them out with the 2-1/2" circle punch.  It was set in place with Dimensionals on top of a 2-3/4" x 2-3/4" Old Olive square. 

The inside of the card has a trimmed piece of Whisper White card stock.  You can see the border of the flipped piece much better with the white card stock in place.  

A strip of decorative paper was added across the bottom front and you can always add your sentiment there.  Mine is blank for now.  I'm not sure what occasion I want to use this for.  I just may keep it.  I like this card, it's such a fun and unique fold.  

Give it a try, there's LOTS of possibilities for it!  Plus it's SUPER easy!

Thank you SO much for visiting today,
Wanda 


Sunday, September 27, 2015

Pop-up Technique Birthday Card

Today I'm going to share with you a card I received in the latest swap I participated in.  The technique used here is the Pop-up card technique.  It's a very fun technique.  It does have several pieces to it but it's SO worth it.  You can decorate the front and be done or you can use the back to write your sentiment.  It folds down to 5-1/2" x 4-1/4".  Terri taught this technique at the August Technique Tuesday night. 

This one has very little stamping on it.  The decorative paper gives this card it's color and "fun!"  

You can find the instructions for this technique here.  

They are fun to do because they are SO different than your average card.  Not that there is anything wrong with the average card, but it's fun to mix things up now and then and try something new and different, or perhaps just something different.  You need to step out of your box now and then.  I used this technique for the latest swap I attended.  I liked it, but I thought it took more time that I had cared to donate to making swap cards.  I am not sure I would make anymore in the near future. Unless a wonderful stamp set comes along that would do this technique justice!

Thank you SO much for visiting today,
Wanda



Saturday, September 26, 2015

A Flower Patch and Another Thank You Card

No, it's not "another" thank you card as it stated in the title of this post.  That is the name of the set where the "thanks" came from. I have not made a thank you card in a while so the "another" doesn't quite fit!!! LOL  

I was in need of a thank you card so I thought I would play around with some colors, textures and accessories today.  I used Crumb Cake for the base of my card and for the top layer. Under that top layer is a piece of Whisper White card stock.  I used a piece of Wild Wasabi decorative paper.  I liked the design with all the words on it.  It seemed to blend well with the design and theme of my card.  I saw the word "thankful" in it somewhere. The polka dots might have worked but I thought it was a little too busy. I needed something like lines or strips.  The words are in lines, so I ran with it and it worked!

I used the punch that make the three different size ribbons.  My ribbon is 2" wide.  I taped it in place and then added a half a paper doily on top.  I used a half doily because that is what I fell out of the pack when I grabbed it.  I thought I would try to make it work.  I originally had the orientation of the card going landscape instead of portrait.  

Next I stamped 3 leaves and I cut them out with a scissor.  I drew in some veins using Wild Wasabi ink and a blender pen.  They faded a  lot, which is fine, I didn't want them to be real dark.

The larger flower piece was stamped using Tangelo Twist.  The top flower was stamped using Pumpkin Pie and the petals inside that flower were stamped using Tangerine Twist.  I set the flower in place on the card using Dimensionals.  And for the final touch, I added a Candy Dot in the middle of the flower for some contract and texture.

The words were stamped using Memento ink.  I was going to use some other words from that set and punch them out using the oval punch and added a Pumpkin Pie oval scallop but that took up a lot of the space on the bottom left and it covered the ribbon so it would look like just a piece of decorative paper instead of a trimmed piece.  Fortunately for me there were small words in that set and also fortunately for me, there was just enough space in that bottom corner for the word!!!  I must be livin' right today!!! LOL

This was a fun card to make and I like the colors.  Fallish looking but yet a bit of summer still hanging in there with the greens!!

Thank you SO much for visiting today,
Wanda

Friday, September 25, 2015

A For All Things Fall Card and Camouflage Technique

I was cleaning up my worktable (something I don't do often enough) and I ran across a card I had received in Augusts swap. The technique used here is the Camouflage Technique.  It's a very fun one to do but you do need to make sure you have some time to create with it.  The card stock is wet from rubbing alcohol and it does take time to dry.  Though you can speed it up with the heat tool, but that takes time too.  So if you are in a hurry to make a card, this is not the technique you are looking for!

But if you're looking for a fun technique or wanting to try something new, well then this is for you!!!  It is a very easy  technique to do, it just requires a little time.  You can find the instructions here.

This card was made by Nancy at Terri's Technique Tuesday group.  I LOVE the fun fall colors she used.  I don't have this "For All Things" stamp set.  It's a fun one but not in my library!  That's what is fun about swaps too, you get to see other sets up close and personal.  

Give this technique a try!

Thank you SO much for visiting today,
Wanda

Thursday, September 24, 2015

A Flower Shop Pop-up Birthday Card

These pop-up cards are very fun cards to make, and they are not difficult either.  There are a lot of pieces to them but they are SO worth it.  This is the card that Terri had the gals make for her August Technique Tuesday class.  

To make this, you score a 4-1/4" x 11" piece of card stock at 1/2, 2, 4 and 5-1/2". Decorate the 5-1/2 x 4-1/4" section of the card base (front and back).  The front of this card has the Hardwood image on it  and the back has flowers and words (bottom photo).  

Add Sticky Strip to the 1/2" section - fold piece up (at 5-1/2" score line) with the 1/2" piece folded under, and adhere it to the front of the card.  Folding that piece helps you see where that 1/2" piece will be attached, plus it gets that piece exactly where it needs to be to be square.  

Score a 5-1/2" x 3" piece of card stock at 1/2" and 2".  Decorate the bottom panel as desired.  Add Sticky Strip to the front side of the 1/2" piece and to the bottom back side of the opposite panel.  Stick the bottom panel to the bottom of the card base and the 1/2" piece to the front of the card.  This will form your pop up. Now embellish the rest of the card as desired.

It is very simple and fun to do!

Thank you SO much for visiting today,
Wanda

Wednesday, September 23, 2015

A Happy Birthday, Everyone Butterfly Card

Sometimes I end up with think strips of decorative paper that I just can't throw away.  But how many can you really keep around too??  I had run across this scrap piece of "English Garden" decorative paper and was not going to move forward in my workroom until I was able to use it.  Actually, I only challenged myself with that because the "moving forward" part had to do with cleaning up the workroom!!! LOL

I layered the piece using Cherry Cobbler.  I thought it would make those three top flowers pop, and it did!.  Then I textured a piece of Whisper White with the sideways stripes.  I have not used that folder much at all and I do like it, just don't know why I don't use it more.

So I'm liking what I'm seeing and decided to move forward with the card.  I took a folded half sheet of Early Espresso for the base of my card.  Then I added a piece of Cherry Cobbler that was cut 1/8" smaller on two sides.  I trimmed the Whisper White piece by cutting off 1/4" on two sides.  Then I taped those layers together.  I added the English Garden piece and thought about it for a few minutes.

I LOVE the large "Happy Birthday" from the "Happy Birthday, Everyone" Hostess set so I thought I would try to work that into the card.  I wished I would have tried to work it onto the card before I taped the English Garden piece in place!!  But as it turned out, I do like how it is on the card. I set it in place using Dimensionals.

And of course, that large open space at the top right was screaming for a Cherry Cobbler butterfly using the Butterfly Thinlits.  And a few pearls down the middle was all it needed.  I also set the butterfly in place using Dimensionals.

I had fun making this card and it was basically pretty simple, quick and easy to do!

Thank you SO much for visiting today,
Wanda

Tuesday, September 22, 2015

An Embellished Ornaments Christmas Card

I finally returned the stamp sets and dies back to my sister.  It was fun playing with them.  Some of the sets I struggled with, others the ideas just flowed.  This was one of the sets I had troubles with.  This bulb in particular.  I had cut the bulb out using the dies. I used Cherry Cobbler for the back of the bulb and gold foil for the front.  I affixed the two pieces together and set it aside for a few days.  I had no idea where I was going with it.  Then I had my pearls out for some other project so I thought I would add some pearls to the bulb to dress it up.  I did that and ended up setting it aside for a few more days.  I was just totally lost.  I was once again playing with another project and had a scrap piece of the Mossy Meadow and it ended up behind the bulb. The piece you see on the card was the actual scrap piece.  I liked how it looked behind the bulb.  Though I am thinking it would have looked better using the Cherry Cobbler behind it instead of the Crumb Cake. Oh well, what's done is done!!!

Once I had that strip done the rest was easy.  I had a scrap of the large dots from the "Merry Moments" 6" x 6" stack.  I have used that stack more than I've ever used any of them that I've purchased!!! It's about time!!! LOL  

The words are from the "Petite Pairs" set and I used Old Olive on the scalloped oval.  I added some texture to the background and viola!, it was done!  Finally!!

Thank you SO much for stopping by today,
Wanda

Monday, September 21, 2015

A Sparkly Season Halloween Candy Bar Holder Weekend Project

Today I thought I would work on an easy Halloween project.  I have not shared a project with you in a while and it's about time!!! This is a fun candy bar holder.  It holds the 1.55 oz. Hershey bar. It forms a nice pocket for the candy bar to slip into and the top folds over.  Slide on the belly band and it's ready to go!  I LOVE making these holders. 

These are very easy to make.  The bottom photo shows how the base of the holder looks before it's folded and assembled.  You can find the complete instructions for this fun holder at Score Pal. This is a direct link so you won't have to be searching all over their site for the instructions.  (I hate that!!!).

First I cut my card stock and then scored it as the instructions stated.  Then I found the decorative papers that I wanted to use and began covering my holder.  Since I didn't order any Halloween papers, I had to make do with what I had. Fortunately I have the large 12" x 12" pads of decorative paper.  The holder is Mossy Meadow and the decorative paper is Old Olive.  I did have Mossy Meadow but I thought it got lost on the background so I went with the Old Olive.  Once I add my decorative papers, I then fold and glue (yes, glue) my holder together.  You can tape it but the tape doesn't seem to hold up as well as gluing does. It doesn't take that long for the glue to set up either, especially if you use a bone folder to press it down.

To make an easy belly band, I just take a strip of card stock and wrap it around the holder.  Then I remove it and use my bone folder to make those fold lines crisp.  I also glue the belly band together.  Then I slide it on the holder and here I added the pumpkin.  

The pumpkin was made using Pumpkin Pie decorative paper on two layers of Pumpkin Pie card stock.  The circles are 2-1/4".  I also glued them together and set something heavy on them to keep them flat while they dried.  I did stamp the pumpkin before it was cut out.  I set it in place on the belly band using Dimensionals.  See, I told you it was easy!!!

Thank you SO much for visiting today,
Wanda


Sunday, September 20, 2015

A Festive Fireplace Christmas Card

I found a fun "Festive Fireplace" card on Pinterest made by Nicole Watt.  You can view here card here.  I did make several changes to it but there are a few things I did copy, like the words on the side and the wreath at the top.  And of course the fireplace!!!  I changed the background, mostly because I didn't have the decorative paper that she used.  I used some from the "Merry Moments" 6" x 6" paper stack.  I'm actually using a lot of paper from that stack. I wonder if I will use it up!!! LOL  No way!!

Okay, let's talk about my card.  I had to fussy cut out the fireplace and mantel. I did copy the color of the mantel and the color of the words.  I used Crumb Cake ink, that is what the color looked like to me on Nicole's card.  Once I cut out the fireplace, I cut out the center of the fireplace as well.  Then I used Dimensionals and stuck a piece of Basic Black to the back of it.  But before I did that I colored it in with markers and a blender pen.  There are LOTS of layers with Dimensionals on this card!  Next I colored the logs and flames.  I set them in place on top of the black piece.  I set the mantel in place with Dimensionals.  Next I colored the stockings and set them in place on the mantel with a half of a Dimensional.  There's not a lot of room behind them.  I don't know if you can see it, but I wrote names on the stockings.  This is a card for our son and his wife and kids. He never reads my blog so he won't see the card!  

I stamped the wreath using Garden Green card stock. That was the color it looked like on Nicole's card. Then I used the Dazzling Details Cherry Cobbler on the berries on the wreath to give it some color.  I think Nicole had just colored hers in with a marker.  I wanted to add some sparkle to it.  I may add a little sparkle to the flames too. I think the card could use a bit more "shine" to it.  I added a bow to the top of my wreath. I don't believe Nicole added that.
This card was a lot of work and a lot of time was put into it.  Plus a lot of love.  I like the concept of the fireplace stamp and dies but I don't think I will make anymore cards using it.  It's my sister's set and I will be returning it to her tomorrow so I thought I should make at least one card using it.  I did and I'm done!!!  It's a fun set but it requires a lot of time to make a decent card using it.

Thank you SO much for visiting today,
Wanda

Saturday, September 19, 2015

A Traveler Masculine Card and Camouflage Technique

Okay, Christmas Week is over.  It started out rough.  I had a very tough time using that "Embellished Ornaments" set. But I was able to finish out the week using the fun "Sparkly Season" set.

This card was one from our Tuesday Technique night swap and it was made by Tanya.  Technique night is coming up and I need to get my card made for it.  

I like how Tanya used blues for the camo instead of the usual greens and browns like most of us did!!!  It's another great masculine card.  If you'd like to know how to do this technique, just click here.  

I had a great time playing with this technique.  I want to give it a try with Real Red, Garden Green and try gold embossing.  I want it to have a Christmas look.  Yup, I'm still thinking Christmas, even after a whole week of it!! LOL

Thank you SO much for visiting today,
Wanda
 

Friday, September 18, 2015

A Sparkly Season Christmas Card

Here is my favorite card so far.  I wish this one didn't take so long to make or I would use it for our Christmas cards this year.  It takes long because of the circles involved.  To make that top panel I had to attach the "Merry Moments" decorative paper to a piece of Whisper White card stock.  I needed the base of this piece to be solid.  The decorative paper doesn't have enough weight to it as the card stock does.  Once I did that then I punched a 1-3/4" circle in the piece.  Next I cut a 1-7/8" Cherry Cobbler circle.  Then I cut out the 1-3/4" circle from the center of that, leaving me a sliver of a circle/ring.  For the Mossy Meadow ring I cut a 2-3/8" circle and then used the 1-3/4" circle punch for the center of that.  So now I have my two rings.  I glued the Cherry Cobbler ring on top of the Mossy Meadow ring.  Then I glued those rings on top of the circle I punched in the Merry Meadows decorative paper piece.  

I stamped the snowman on a piece of Whisper White card stock and colored it in with Real Red and Old Olive markers.  Oh and the Pumpkin Pie marker for the nose.  I added some Crystal Effects and Dazzling Diamonds and set it aside to dry.

The "Let it" came from the "Sparkly Season" set.  It is from the "Let it Snow" words.  I used a 3/4" circle punch and used only the "Let it".  I punched out a 1" circle of Mossy Meadow and layered it behind the "Let it".  

I took a scrap piece of the "Merry Moments" decorative paper and taped it to the bottom of the large colored polka dotted piece.  I took a piece of ribbon and taped the edges to the backside of the card using Scotch tape.  

I cut a piece of Crumb Cake card stock 4" x 5-1/4" and taped it to the Cherry Cobbler card base.  

I die cut the word "snow" using the "Seasonal Frames" Thinlits set.  I added some Crystal Effects and Dazzling Diamonds to it too. I didn't completely cover it, I just wanted it on the high and low parts of the word.  I set it aside to dry.  And I waited and waited.  I think the Crystal Effects needs to dry a long time before you can handle the card, so I left it overnight and finished putting it together this morning.

The snowman was all set up so I added some Dimensionals behind the circle and lined up the snowman and pressed the Dimensionals into it.  I added a Dimensional behind the "Let it" and set that in place.  I tied a bow and used a half a pop up glue dot and set it on the bow and added the bow to the right side of the ribbon. 

Then I added Dimensionals all over the back of the focal panel and set it in place on top of the Crumb Cake piece.  And there you have it.  There's lots of steps and waiting in making this fun card.  I like it very much and wished I could have used it for our Christmas card this year but it just takes too much time to do.  But I am going to enter it in a contest later this month.  

Thank you SO much for visiting today,
Wanda

Thursday, September 17, 2015

A Sparkly Season Petite Pairs Christmas Card

Okay, I packaged up the "Embellished Ornaments" set and am ready to return that one to my sister.  Unless someone on the net comes up with one I just HAVE to make. 

I LOVE Nutcrackers!!!  I think they are fascinating and fun. It's a nutcracker and a toy in one!!! LOL  We have a few of them we set out at Christmas time.  Though this year at Michael's I did see some Halloween ones.  I did not purchase any.  I don't decorate the inside of the house much for Halloween.  Anyway, I Googled "nutcrackers" so I could see the fun colors.  I found some fun colors that I thought would work with the "Merry Moments" decorative paper.  All but the Pacific Point marker works well. And there's nothing I can do about it, what's done is done!!! Just pretend  it works, okay?  LOL

To make this card I used a folded half sheet of Mossy Meadow card stock.  Then I added two decorative papers from the "Merry Moments" decorative paper packs.  I cut them 4" x 5-1/4" and then I cut them from tip to tip and taped two pieces onto the top of the card stock.

Next I colored in the Nutcracker and all the other images.  I punched out them using a 2" circle punch.  The layer behind it is a 2-3/8" piece of Mossy Meadow.  This piece was set in place using Dimensionals.  The words are from the "Petite Pairs" set an were punched out with the 1-1/4" circle punch.  Then I punched a Mossy Meadow scalloped circle and layered behind the words.  I set that piece in place using Dimensionals as well.

I did have fun making this card.  And I like how cheery it is!!

Thank you SO much for visiting today,
Wanda